Tecnica Industrial Oswaldo Filizola Ltda.

Stanje: zelo dobro (rabljeno), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for professional continuous operation. For sale is a professional climate test chamber by Weiss Technik, Model WK 5/55-120 from year 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range of 10–95% rH, the chamber covers a wide spectrum of applications. The spacious test volume of approx. 5 m³ also allows testing of larger components or assemblies. Technical Highlights: • Temperature range: -55°C to +120°C • Climate range: 10–95% relative humidity • Heating/cooling rate: approx. 1.5 K/min • Water cooling required Technical Data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume Cedpfx Asziztujgqsgw Test chamber volume: approx. 5 m³ External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55°C to +120°C Heating/cooling rate: approx. 1.5 K/min Climate range: 10–95% rH Dew point range: +4°C to +85°C Electrical Data: Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: approx. 47 kW (depending on configuration) Nominal current: 71 A Customer-side protection: 63 A Cooling water: Water cooling required Maximum cooling water consumption: approx. 7 m³/h Inlet temperature: approx. 20°C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: • Weiss Technik climate test chamber WK 5/55-120 • Control panel • Operating manual (German) • Nameplate & documentation Condition: used Scope of supply: (See photo) (Specifications and technical details subject to change and errors excepted!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for ageing, performance, and safety tests of lithium-ion energy storage systems. Special Value: The device is engineered to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What does the device specifically do? (Point 2 – Performance & Application) - Ageing tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-term/temperature cycling and thermal shock tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe test execution under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technologies Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing facilities - Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated safety features include: - Automatic & manual CO₂ fire extinguishing system - Fire detector with optical & acoustic alarm - Mechanical double door locking (secure containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g. nitrogen) - Emergency stop / manual activation of the extinguishing system - Passthrough ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled propagation. It is not an abuse or destruction test unit, but a compliant, safety-oriented test chamber for realistic operational and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phases: single phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Short – Why This Device Stands Out: - Genuine battery safety test chamber Cjdpezizr Rsfx Agqogw - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of supply: (see picture) (Changes and errors in the technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Binder Model: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideal for laboratory, workshop, research, electronics, materials testing, or hobby applications where constant temperatures are required. Features: - Precise digital temperature display - Robust industrial quality - Even heat distribution - Made in Germany - Ideal for professional applications What can this unit do? The BINDER ED 53 is a precision drying oven featuring natural convection. It is utilized for: - Drying samples and materials - Heating components - Tempering materials - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to high-quality insulation and workmanship, the unit operates evenly and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300°C - Rated power: 1.20 kW - Connection: 230 V / 1N~ Cedpfx Agezizrwoqegw - Current consumption: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Appliance class: 2.0 - Interior volume: approx. 53 liters - Dimensions (approx.): * External: approx. 63 × 63 × 57 cm (W × H × D) * Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Specifications and details subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Test Type: Tensile and Compression Testing Technical Specifications: Crosshead Speed: 0.001 – 1,000 mm/min Speed Accuracy: 0.01% of Vnenn Travel Resolution: 0.038 µm Positioning Repeatability: < 2.0 µm Maximum Test Frequency: 0.5 Hz Measuring Rate: 500 Hz Data Transfer to PC: 10–100 Hz Force Measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Test Area Width: 440 mm Test Area Height (lower): 1,050 mm Weight with typical accessories: approx. 160 kg Electrical Data: Adjustable Mains Voltage: 100–250 V Mains Frequency: 50 / 60 Hz Power Consumption: 800 VA Current at 230 V: approx. 3.4 A Fuse: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Test Temperature: 23.3 °C Displacement System: Incremental Encoder (rotary) Load Cell Installed 29.01.2014 Csdpfx Agozizrkeqsgw Load Cell: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Load Cell: Xforce P Module: DCSC Pre-series Rotation: 120° testXpert Control Documented service and calibration reports available. Software & Control: Software: testXpert® II Documented Version: V3.2 Installation documentation from Version 2.2 Documentation as of: March 2010 PC Control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial test software. Installed Modules & Components: DCSC Measurement Module Xforce P / Xforce HP Load Cell Incremental Encoder (rotary displacement system) Force measurement in compliance with ISO 7500-1 Mounted below moving crosshead Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of Delivery: Material Testing Machine BT1-FB010TN.D30 PC with monitor Load cell DCSC module Specimen grips / clamps Adapters and holders Tools Documentation folder with documents Delivery as depicted in the photos. (Subject to technical modifications and errors!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for ageing, performance, and safety tests of lithium-ion energy storage systems. Special Value: The device is engineered to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What does the device specifically do? (Point 2 – Performance & Application) - Ageing tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-term/temperature cycling and thermal shock tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe test execution under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technologies Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing facilities - Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated safety features include: - Automatic & manual CO₂ fire extinguishing system - Fire detector with optical & acoustic alarm - Mechanical double door locking (secure containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g. nitrogen) - Emergency stop / manual activation of the extinguishing system - Passthrough ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled propagation. It is not an abuse or destruction test unit, but a compliant, safety-oriented test chamber for realistic operational and fault scenarios. Technical Key Data: Cgjdjziznfopfx Agqjw - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phases: single phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Short – Why This Device Stands Out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of supply: (see picture) (Changes and errors in the technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is engineered for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temporal temperature deviation: ≤ ±0.3 K Cjdpfx Agjzizmzeqogw - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% r.H. - Dew point range: +5°C to 78°C - Temporal temperature deviation: ≤ 1.0 K - Temporal humidity deviation: ≤ +3.0% r.H. Technical specifications are based on an ambient temperature of +25°C, rated voltage of 400V, without test specimen, heat compensation, or additional equipment. Options may affect performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, continuously variable capacity via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load capacity: 150 kg/m² - Shelf: stainless steel, support area 620 x 600 mm - Max. load per shelf: 35 kg - Total load at maximum shelf configuration: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input of set values - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for customer-side specimen control Dimensions: - Test volume: 350 liters - Internal dimensions (H x W x D): 750 x 650 x 720 mm - External dimensions (H x W x D): 1800 x 920 x 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Csdpfx Agozizmuoqsgw Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: Cgodpfx Agszizmneqjw - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Cgodszizmbopfx Agqew Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: rabljeno, Espec Model: TSD-100 100 litres usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range heating chamber: +60°C to +200°C Temperature range cooling chamber: -70°C to 0°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Over-temperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Cedozizl Repfx Agqogw Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points are performed on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Cgsdpfx Aszizl Dogqow Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for Climatic Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port Ø approx. 50 mm, left side 2 ports Ø approx. 125 mm, left side 1 port Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as the buyer, please note the following: The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: rabljeno, Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Force Transducer TC-LC100KN.G02 (100 kN) Software testXpert III 1.6 serves as the control and evaluation software for ZwickRoell material testing machines. It enables standards-compliant test procedures, logs measured data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell's testing software (especially testXpert III) supports current Windows platforms, ensuring compatibility and intended use with Windows 11. Item Description: For sale is a high-quality material testing system, consisting of: - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) The system comes from a laboratory environment and was used for mechanical material testing at ambient and high temperatures. All devices are pre-owned, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened base version (W) Power supply: 400 V / 50–60 Hz / 3Ph+N+PE, current draw 9 A Test area: height 1,765 mm, width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Nominal test force (Fnom): 100 kN Drive: AC drive 4 kW (widened base version, W) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) per ISO 7500/1 Supply voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current draw: 9 A Power consumption: 5.0 kVA Load frame height: approx. 2.32 m Test space height: 1,765 mm Test space width: 1,030 mm Machine weight: approx. 1,820 kg Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Codpfx Aozizlqsgqjgw Force Transducer: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Max. temperature: 1200°C 2 separately controllable heating zones Output: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Force Transducer TC-LC100KN.G02 Nominal force: 100 kN Protection class: IP67 Precise force measurement according to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) - Connection cables and mounting materials (if available) (Subject to modifications and errors in technical specifications and descriptions!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), RS-Simulatorji Tip: KKM 110/45 Cgsdszizldjpfx Agqew Proizvajalec: RS-Simulatoren, vodno hlajeno Klimatska komora 110 m³ z vključnim kondenzatorjem Tip KKM 110/45 spada v modularno serijo TKM/KKM podjetja RS-Simulatoren – torej gre za modularno zasnovano klimatsko komoro, ki se sestavi na lokaciji pri stranki. Ta zasnova omogoča: Modularnost: Posamezni segmenti so predmontirani in se postavijo pri stranki. S tem je kasnejša nadgradnja (povečanje globine ali dodajanje modulov) kot tudi morebitna selitev enostavna. Tehnični podatki klimatske komore: Proizvajalec: RS-Simulatoren Prüf- und Messtechnik GmbH Tip: KKM 110/45 Zunanje mere: 6200 x 9400 x 3400 (Š x G x V v mm), vključno s tehničnimi dodatki Notranje mere: 5900 x 7000 x 2960 (Š x G x V v mm) Vrata komore (dvojna) 3600 x 2930 (Š x V v mm) Osebni vhod (enokrilna vrata) na stranski steni 1880 x 900 (V x Š v mm) Prehodi: 8 x Ø120 mm (4x levo & 4x desno) Okna: 1x (460 x 550 mm) v sprednjih vratih komore, ogrevano 1x (1260 x 1000 mm) v levi stranski steni, ogrevano Temperaturno območje: -40 °C do +120 °C Časovni odklon: ± 0,8K – 1,5K po DIN 50011 pri prazni komori Vlažnostni razpon: 10 % do 95 % Toleranca vlage: +/- 5,0 % Hladilno sredstvo: 2x R404A 52 kg, 2x R23 17 kg Hitrost spremembe temperature: Ogrevanje: 1,0 K/min Ohlajanje: 1,0 K/min Maks. površinska obremenitev: 500 kg / m² Električni podatki: Napetost: 3x400V/N/PE Tok: 340A Teža: pribl. 2.000 kg Za vašo varnost kot kupec naslednje informacije! Na klimatskih komorah, ki jih ponujamo, se predhodno izvedejo naslednje točke: 1. Preverjanje delovanja in zamenjava potrebnih komponent 2. Po potrebi novo polnjenje s hladilnim sredstvom v skladu z zakonskimi predpisi 3. Preizkus tesnosti s certifikatom 4. Po uspešnem pregledu je izveden dokumentiran testni zagon komore. Stanje: rabljeno / used Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in navedbah!) Za dodatna vprašanja nas lahko kadarkoli pokličete.

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet Cgsdpfezizk Hex Agqow - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Stanje: zelo dobro (rabljeno), Weiss Type: WK 27'/50-150 Climatic Chamber Water-Cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor Load Capacity: 30000 N/m² (Surface Load) Test Chamber Volume: Approx. 27,000 Litres Sample Mass: 1000 kg Cooling/Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Cedpezizhfofx Agqegw Temperature Stability: ±0.3 to 1.0 K (Over Time) Temperature Stability: ±0.1 to 0.5 K (Over Time) Climatic Operation: 10 – 90°C Humidity: 10...98% rH Temperature Stability: ±0.1 to 0.5 K (Over Time) Dew Point Range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A With additional base plates to increase floor load capacity Important Safety Information for Buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Further questions gladly answered by phone.

Stanje: rabljeno, mytron Type: T2240 Temperature Chamber, Water-Cooled Technical Data: External Dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test Chamber Dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test Chamber Volume: approx. 2240 l Cable Entry Ports: 2 x 100 mm right side 2 x 100 mm left side Temperature Range: –40 °C to +100 °C at 23 °C ambient temperature Temporal Temperature Consistency: +/- 0.5 K Spatial Temperature Consistency: +/- 1.0 K Cooling: Water cooling, Inlet and outlet 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration system errors Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Outlet temperature approx. 22 °C (approx. 27 °C during continuous cooling) Power Supply: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power Consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Codpszizg Usfx Agqegw Lighting: 25 watts each on the left and right sides of the test chamber Exhaust Connection: DN 100 mm plug-in system Safety Device: Electronic over-temperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing Window: Quintuple glazing 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data, all information is non-binding!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Cjdpfx Aezizghjgqjgw Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Cedszizdyepfx Agqogw Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: rabljeno, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24/07/2020 Cgsdjzizdtjpfx Agqew Full analysis with the stationary spark spectrometer SpectroMaxX: With the spark spectrometer, alloy contents and trace elements of macroscopic solid samples can be determined with high precision down to the ppm range. System Description: - Open spark stand for high sample throughput - Compatible with a wide range of sample geometries - Magnesium available as base element - The analyzable elements and concentration ranges depend on the available methods for the respective base element - Usable wavelength range: 170–670 nm - Measurement output as concentrations or intensities - Selectable output units (%, ppm) - Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical Specifications: CCD Optics: - High-resolution multi-CCD detectors - Stabilized against temperature fluctuations - Effective wavelength range: 140–670 nm (the applicable and configured range depends on customer requirements) - Automated profiling Analysis Modules: - Freely selectable analysis modules - Optimized according to customer requirements - On-site expansion with additional modules possible Spark Stand: - Open spark stand for high throughput and various sample geometries - Minimized argon consumption with argon economizer module - Optimized argon flow - Reduced cleaning intervals - Spark stand plate easily replaceable - Temperature-absorbing design without water cooling - Integrated shutter system for optimal plasma visualization Excitation System: - Fully digital plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control - 32 MHz microcontroller - Max. spark duration: 4000 µs - Max. spark power: 4 kW Display System: - Dedicated microcontroller for each CCD - Serial source interface Spectrometer: - External, state-of-the-art computer - PC system with Windows operating system - Keyboard and mouse - Monitor Software: - Spark Analyzer Pro MAX software for analytical operation and calibration - Continuous automatic hardware diagnostics in the background - Automatic verification and identification of alloy/grade - Result manager - Online maintenance planner Ambient Conditions: - Room temperature: 10–30°C - Humidity: 80% max., non-condensing - Atmosphere: free from corrosive fumes and heavy dust load Spectrometer: - 90–253 V, 50/60 Hz - Max. 400 VA during sparking - Fuse: 16 A slow-blow - Design: benchtop - Depth: 750 mm - Width: 625 mm - Height: 450 mm - Weight: 77 kg Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data, all information without liability!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Thermo Scientific Thermo Scientific Forced Air Drying Oven UT 6200 F with External Temperature Control Unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced Air Drying Oven UT 6200 F with External Temperature Control Unit Complete Laboratory Temperature Control and Drying System Description – Function & Application For sale is a professional temperature control and drying system consisting of: - Thermo Scientific / Heraeus Forced Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced air drying oven ensures uniform temperature distribution in the chamber and is ideal for drying, heating, and tempering samples, components, or materials. Heating is provided by the external water temperature control unit (external heater), which enables highly stable, indirect, and gentle temperature control—without local overheating and with homogeneous heat distribution. Typical applications: - Laboratory & Research - Industry & Production - Material testing / Component drying - Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable. Unit 1 – Forced Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Specifications: - Max. temperature: 85 °C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Current consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Internal chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Unit 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Specifications: - Heat transfer medium: Water - Connection: 400 V / 3~ / PE / 50 Hz Cgodoziy D Eepfx Agqew - Current consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150 °C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Overall: Complete temperature control and drying system Operation in combination possible (external heating) Total weight: approx. 155 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone if you have any further questions.

Stanje: zelo dobro (rabljeno), Weiss Technik EmissionEvent VOC/240 Type: EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climate Test Chamber Water-cooled For sale is a professional emission test chamber, Weiss Technik EmissionEvent VOC/240 (year of manufacture: 2018), previously used in an industrial laboratory and testing environment. This device is designed for standard-compliant emission testing under precisely controlled temperature, climate, and process conditions, and is built for continuous operation in laboratories, industry, and quality assurance applications. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions, examining which substances a material releases into the air. Typical applications: - Emission testing of plastics, components, materials - Automotive interior material tests (odor/hazardous substances) - Building products and furniture emissions - Packaging, textiles, adhesives, coatings - Quality control and standard-compliant testing (e.g. ISO / VDA / DIN) The test system provides precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test chamber using carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring instruments. Device functions / Features: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Program mode / continuous operation possible - Sampling ports for VOC analysis - Industrial design (for laboratory & continuous operation) Specifications for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Rate of temperature change (per IEC 60068-3-5): - Heating: 0.4 K/min - Cooling: 0.3 K/min - Rate of temperature change (average, with reinforced heating/cooling): - Heating up to +65 °C: 1.5 K/min - Cooling from +65 °C to +20 °C: 1.3 K/min Specifications for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240: External dimensions (unit): - Width: approx. 1350 mm - Depth: approx. 2500 mm - Height: approx. 1985 (2190) mm Internal dimensions (test chamber): - Emission test room: 200 l - Test room gross: 240 l - Test room net: 208 l - Maximum test sample weight: 80 kg Internal chamber dimensions VOC/240: - Width: approx. 600 mm - Depth: approx. 560 mm - Height: approx. 600 mm Electrical: - Voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated power: 12.1 kW - Rated current: 30 A - Protection class: IP54 Refrigerant: - R134a – 2.5 kg Weight: approx. 1080 kg Buyer safety information: For your safety, the following steps are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors reserved!) For further questions, please feel free to contact us by phone. Cedpfx Asziyz Rjgqsgw

Stanje: rabljeno, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale: one BINDER VDL 115 safety vacuum drying oven Designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications with flammable solvents and meets stringent safety requirements (ATEX compliant). With precise control of temperature and pressure, this unit is ideally suited for reproducible laboratory and industrial processes. Typical application areas: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: up to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass door with shatter protection - ATEX-compliant design - Multiple shelf levels (number depends on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 litres - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Degree of protection: IP54 - Rated temperature: 200 °C - Temp. protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Technical specifications may be subject to change and errors are reserved!) Cgedpfx Agsziyymoqjw For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal chamber: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: -42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity spatial: ±0.5 to ±1.5 K Climatic Testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature uniformity spatial: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Halogen lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Cgodpfx Agoziyygjqsw Refrigerant: R-404A Weight: Approx. 515 kg For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VCS³ 7034-5 Vötsch climate test chamber, water-cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rates: Csdpfx Aoziyx Njgqogw Heating: 6.8 K/min Cooling: 6.7 K/min Data for climatic test: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation at the center of the test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climatic range: 2°C / 95% r.h. regulated for max 2 hrs) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side port: 50 mm Side port: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10 %, 50 Hz Rated power: 9 kW Rated current: 20 A Required site fuse: 63 A slow-blow Refrigerants: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) If you have any further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with touch panel) Features of this control system: - Color touchscreen with intuitive menu navigation (usually 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible if applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optional Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) Cgjdpfjziyxpex Agqow - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min - Maximum thermal compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Interior dimensions (W×D×H): 1100 × 950 × 950 mm - Exterior dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is fitted with port openings on the right and left sides. These allow measurement lines and test devices to be routed into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Where needed, refilling with a legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and details!) If you have further questions, we are happy to assist you by phone.