Varjenje pa tabele

3 Tonnen Protec KT 3000

Stanje: kot nova (razstavni stroj), Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3000 kg Handheld remote control with digital display Double foot pedal control Height approx. min. 700 mm tilted to center, max. height 1400 mm Faceplate diameter: 1400 mm Tilt angle min. 135° Rotation speed: 0.05 to 0.9 rpm Dsdpfxefxpgge Aflsul Motor power: 3 kW

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Tumble Belt Continuous Shot Blasting Machine Manufacturer: Rösler Drum Diameter: 400 mm Maximum Workpiece Length: 700 / 1000 mm Maximum Single Piece Weight: 12 kg Loading Capacity: 100 kg Blast Wheels: 4 units, each 7.5 kW Installed Power: 45 kW Dodpfx Asn E Tubjfloul Warranty: 6-month functional and performance warranty upon commissioning by DECK Sarl. Spare parts availability guaranteed for the next 10 years OPTIONAL: Delivery to your plant Supervised installation / Commissioning / Training

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Dsdpsg Tdpgefx Afloul Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length Dusdpfx Afjd Ab H Hslol • Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2000 kg Handheld remote control with digital display Double foot pedal control Duedjncfvhspfx Aflel Height approx. min. 800 mm (tilted to center), max. height 1400 mm Min. horizontal height: 1000 mm Faceplate diameter: 1200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Dujdpfefg E Hlox Aflel Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Complete set incl. hand and dual foot remote control Dusdom Ew Stjpfx Aflel Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range from 0.01 to approx. 0.7 rpm.

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Dsdpfxofibd Ts Afleul Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: novo, Leto izdelave: 2023, Cutting diameter: 1100 mm Bandsaw blade length: 11,000 x 67 mm Cutting width: 1.6 mm Cutting range at 90 degrees (square): 1100 x 1100 mm Cutting range at 90 degrees (flat): 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Dujdpfx Afstq Dw Eolol Space required: approx. 2,800 x 1,700 x 5,200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor spiral. A chip bin approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. On the outfeed side, there is a roller table measuring 1.40 x 1.00 meters. On the infeed side, there is a motorized roller table measuring 2 x 1.40 meters. Optional specifications: - Motorized system for roller table - Laser line - Extra double roller table - PLC display - Anti-vibration system The images are for reference only and do not represent a true-to-scale depiction of the machine.

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Dsdpfx Afsrypmgjloul Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)