Laserski stroj za rezanje

175.000,-€ /3kW/Tischbeladung/15-230mm 6020ETN-NEW/ 6m / 4m

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, delovna višina: 2.000 mm,

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Ihodpfx Aefg E Hpef Tst The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo,

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir Ijdpfsi Apfzsx Af Tsht 2. Ozobljena (bevel) laserska glava 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Ihsdpfx Afed Ab H Ho Tet Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ijdpju Dxb Tefx Af Tjht Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP REVERSING PRESS (1+4 COLORS) CIP3. AUTOMATIC BLANKET WASHING, AUTOMATIC WASH-UP. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL PH MIXING. AUTOMATIC COUNTERS. Ihsdstvmq Nepfx Af Tet INCLUDES WASH CLOTH REWINDER WITH THE MACHINE. PILING ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSIONS: 4,600,000

Leto izdelave: 2021, Stanje: novo, Enoglava rezalna žaga OMC RONDA 700, nova Stroj na zalogi - žagin list premera 700 mm - hidro-pnevmatsko podajanje - pnevmatski nagib na obe strani, s fiksnimi kotnimi nastavitvami 22,5° - 45° - 90°. Za vmesne kote z ročnim mehanskim omejilcem - 2 navpična in 2 vodoravna prijemala - sistem mazanja lista s pršilno meglico Ihsdpfjhrukijx Af Tst - popolna pnevmatska zaščita

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Ihedpod Hy Elefx Af Tst Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 22.351 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, proizvajalec laserskih virov: Trumpf, laserske ure: 17.317 h, laserska moč: 4.000 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 15 mm, maks. debelina aluminijaste pločevine: 10 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, pomik po osi Z: 115 mm, natančnost ponavljanja: 0,03 mm, vrsta hlajenja: voda, skupna masa: 12.000 kg, Oprema: CE označba, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje prahu, varnostna svetlobna zapora, Na prodaj: TRUMPF TruLaser 3030 z avtomatizacijo LoadMaster Stroj je bil nameščen junija 2021. Vzdrževanje je izvajalo izključno podjetje TRUMPF Slovakia, strokovno vzdrževanje opravljeno redno vsakih šest mesecev. Stroj je v odličnem stanju, opremljen z avtomatizacijo LoadMaster. Rezanje pločevine do debeline 25 mm. Tip in moč rezonatorja: CO₂, 4 kW. Maksimalna delovna površina: 3000 × 1500 mm. Stroj bo obratoval do konca decembra 2025, možnost ogleda kadar koli v polnem obratovanju. Ihedpfxewya Twe Af Tet Na voljo celotna servisna dokumentacija.