Stroj za erodiranje žice

+GF+ CUT 3000

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Hsdpfjych Rzex Agionk Submerged cutting machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand-held pendant for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (allows use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled, and thoroughly tested after order placement. A laser measurement of the axes is performed in our facility. We are happy to perform a custom test on the CUT 3000 for you. Incl. user training at Techma on your overhauled machine Optionally, we are happy to offer: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, višina središča: 165 mm, širina na sredini: 635 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 900 kg, Dear Sir or Madam, For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully functional and can be inspected and tested on site. Availability: immediately Centre distance: 635 mm Centre height over bed: 165 mm Centre height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Hsdpfsu St S Aox Agisnk Tailstock taper: MT 3 Drive power: 3.7 kW Required floor space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Stanje: dober (rabljeno), Leto izdelave: 2016, Größe des Tisches: 3000 x 1700 mm Verfahrwege (X/Y/Z): 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase – Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Hedpfswu Dlajx Agienk Spindeldrehzahl: 6.000 min⁻¹ (U/min) Werkzeugwechsler: 40 Stationen (ATC) Steuerung: Hurco Winmax 5 Späneförderer

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Hnodpfx Aevc Akljgiek Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 20 obr/min, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel ranges / Axis travels: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table / Table area: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: Units: 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. workpiece load: kg 11,000 Paintwork: Graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: min⁻¹ 20–6,000 Max. torque: Nm 935 Spindle speed control: 3-stage (oil-cooled) With automatic changeover Feeds: X-, Y- and Z-axis mm/min 2–15,000 Max. rapid traverse speed: X-, Y- and Z-axis mm/min 25,000 Max. feed force: X-, Y- and Z-axis: N 22,000 Space requirements: Length approx. BT3200 mm 8,100 (without cross conveyor + 1,280mm) Height approx. (at Z=1,500mm) mm 3,800 Width approx. (at Y=1,200mm) mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 Hnodjygipajpfx Agiek HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & ICS (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any obvious faults and defects identified are professionally repaired by our skilled service team.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Centre height: 210 mm Swing over bed: 420 mm Hedpjx Rt Eujfx Agienk Swing in bed gap: 580 mm Swing over cross slide: 250 mm Distance between centres: 1000 mm Spindle nose: D1-6 Spindle speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Longitudinal feed: 0.05 – 1.7 mm/rev (17 steps) Cross feed: 0.025 – 0.85 mm/rev (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth threads: 2 – 72 TPI; (45 degrees) Module threads: 0.3 – 3.5 MP, (18 steps) Tailstock quill diameter: D50 mm Tailstock quill stroke: 120 mm Tailstock taper: MK4 Power: 3.3 kW/400 V Machine weight: 1270 kg Dimensions (L x W x H): 1940 x 850 x 1320 mm Equipment: - 3-axis digital readout system - Fixed steady rest - Travelling steady rest - 3-jaw chuck fitted, D200 mm - 4-jaw chuck D250 mm - Drill chuck safety guard with safety switch - Rear splash guard - Tailstock - Coolant system - Chip tray - Toolpost guard - Longitudinal stop - Halogen work lamp - Emergency stop button - CE marking - Machine documentation The machine is a brand-new exhibition model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Hnedpfsu Sbkgsx Agijk Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Hnjdeh Hvk Aopfx Agisk Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: novo, Leto izdelave: 2026, Swing diameter over bed 554 mm Swing diameter over cross slide 370 mm Turning length 2000 mm Centre height 280 mm Spindle bore 104 mm Hnedpfx Agewyd Tnoijk Drive power 11 kW - New machine - with 2-axis ACU-RITE digital readout including constant cutting speed, MULTIFIX quick-change tool post size MC * For more information about the exact standard specification and available options, please visit our website or contact us directly *

Stanje: rabljeno, Leto izdelave: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speed: 3,000 rpm Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose (measured from floor, head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse: X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque: X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Hnsdpfx Ajxwdygsgisk Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.