Nakup rabljenih strojev (278)

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Gkedpfx Aboiidm Ne Tjf Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, MBSM 150-20 For grinding surfaces, edges, and for rounding off Powerful motors with vibration-free operation to achieve optimal grinding results Working height adjustable via continuously tilting sanding unit Workpiece support adjustable in angle Continuous flat grinding surface allows processing of long workpieces Each with a dust extraction port at the spark box and at the rear belt roller Protective screen can be folded away Sandpaper belt change in seconds thanks to quick-release system Simple belt tracking adjustment via set screw Motor with brake and safety switch Dimensions and Weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Extraction Nominal extraction port diameter (external) 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Noise Emission Sound pressure level at workplace Lp (idle without extraction) 80 dB(A) Sanding Unit Max. sanding width 150 mm Sanding belt length 2000 mm Gkedpfx Abohk Df De Tef Sanding belt width 150 mm Belt speed 30 m/s Contact wheel diameter 200 mm

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg Gkedjhk S Stepfx Ab Tef - Available at short notice -

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 141 With standard mobile chassis Dimensions and Weights Chip collection volume: 175 l Nominal diameter outside extraction inlet: 140 mm Length approx.: 1062 mm Width/depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Nominal air flow rate: 1650 m³/h For chips from milling, planing, and sawing processes (not for dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made from high-strength specialty plastic Quick-release fasteners for filter and chip collection bags for simple maintenance Robust, high-quality construction Gkodpfshk S Swsx Ab Tsf Easy to maneuver thanks to swivel castors Low power consumption Extraction unit complies with dust class L Scope of delivery: Unit body with assembled fan module Filter bag / extraction unit Chip collection bag / extraction unit without extraction hose

Stanje: novo, Leto izdelave: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options can be implemented, such as an oil cooling system for multi-shift operation. All machines are available in both left- and right-hand designs. Installation on a stable base frame ensures quick setup and allows for mobile use. User-friendly operation thanks to Siemens PLC control Gkodpfsil Hggsx Ab Tef To uphold our performance promise, we design and manufacture all control cabinets ourselves at our Ilsfeld location, equipping them with reputable international components. This guarantees the highest quality in a compact build. The Siemens PLC control system is perfectly tuned to the requirements of the briquetting process. Foreign-object-resistant conveyor screw via cardanic suspension The conveyor screw, which transports material into the briquetting press pre-compactor, is mounted on a cardan joint. This prevents foreign objects from damaging the conveyor screw. As always, the choice of mounting depends on the specific application. For metal processing, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (litres): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: dober (rabljeno), Leto izdelave: 2000, Gebr. Hettich Blue Max 8 Fitting Drilling Machine Manufacturer: Hettich Model: Blue Max 8 FS Number of spindles in a row: 5 pcs Gedpfx Abjr Igt Do Tjkf Press-in die Workpiece clamping cylinders: 2 x pneumatic Drilling feed: pneumatic Stop rules Swing stops Foot operation Space requirement approx. 1200 mm x 700 mm x 1500 mm Weight approx. 150 kg Some drill bits included The stops are not visible in the photos, but they are included Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Hoku BK119-270-10-VKK stoječi batni kompresor s hladilnim sušilcem, avtomatskim izpustom kondenzata, ločilo olje-voda, predfilter in fini filter, nameščen na varnostni paleti z gumijastimi dušilnimi elementi. Univerzalni batni kompresorji s pogonom preko jermena in visoko kakovostno opremo. Rezervoar izdelan po nemških predpisih AD 2000. Sesalna zmogljivost 650 l/min. Polnilna zmogljivost 520 l/min. Najvišji tlak 10 bar Prostornina rezervoarja 270 l Cilindri/stopnje 2/2 Hitrost vrtenja 920 obr/min. Moč motorja 4 kW/400 Volt Zmogljivost zraka: 650 m³/h Moč motorja: 4 kW Gkodpfer Ig Ahox Ab Tof Dimenzije stroja: 1200x800x2000 mm Tlačna posoda: 270 l Učinkovita dobava: 520 l/min Sesalni volumen: 650 l/min Najvišji tlak: 10 bar Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, LEVEL - Scissor Lift Table HS 300 midi incl. Swivelmax Description: > Mobile scissor lift table with platform base frame and 4 holes for plug-in bolts; 4 swivel casters, 2 of which with brake; wheel diameter 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Lift height in mm: 610 Lowered height in mm: 400 Total height in mm: 1010 Platform size in mm: 1200 x 740 Includes Swivelmax platform tilting frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The tilting frame can be mounted on the HS 300 midi base frame in just a few steps. Even large-format panels can be easily tilted from vertical to horizontal position by a single person without effort thanks to this accessory. Gkedpfotgychox Ab Tef Dimensions of the panel tilting frame: 1800 x 1480 mm Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Weima Shredder / Granulator WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times in woodworking operations worldwide. The high number of units of this highly sought-after shredder ensures trusted, reliable technology at the best price-performance ratio. The machines are characterized by their highly robust construction, ensuring extremely long service life (even outdoors). Intuitive Operation Thanks to Siemens PLC Control with Touch Display To guarantee the electronics are fully matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. The intuitive touch interface allows for rapid adjustments. Features such as adjustable pusher stroke and stop enable high throughput. Built-in overload protection prevents damage to the machine. No Bridging Thanks to Self-Clearing Hopper Design The hopper fulfills several functions. It facilitates loading of materials to be shredded – manually, mechanically, or via conveyor. The generously sized opening makes it easy to load even very large pieces. The specially designed, rounded front ensures effective prevention of material bridging. Even with bulky parts, the shredder keeps itself clear. Hopper extensions or lids with gas struts are available upon request. Long-Lasting Rotor Bearings Thanks to Offset Design Rotor bearings must be extremely robust due to the high demands during operation. To prevent dust or foreign materials from entering, we designed the bearing assembly offset from the machine frame. This also improves serviceability and provides easy access. Technical Specifications: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 - 125 - Power (kW): 22 - Number of knives: 54 - Available knife sizes (mm): 40 x 40 - Particle size (mm): - Discharge port (mm): 200 - Feed opening (mm): 1000 x 1250 Gedpfjpdqzxjx Ab Tekf - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second knife row - Logspacer Location: Ex stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, SRF Maxi (Image right) 3 m Extraction Arm Application Area • Medium fume/dust volumes • Regular use Benefits Gjdpfx Absdqzcve Tekf • Minimal repositioning of the extraction hood required • Contamination-free filter change • Safe operation thanks to phase sequence monitoring • High economic efficiency due to long filter service life Features • Safe operation with filter monitoring • Extraction hood can be rotated and swiveled 360 degrees • Start/stop automation (optional) • Workplace lighting (optional) Technical Data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation efficiency: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filter: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Extraction arm diameter: Ø 150 mm Extraction arm length: 3 m Suction port diameter: Ø 150 mm Power supply: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Godpfsdqzh Rsx Ab Tskf Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Vacuum membrane press VPR-3500 is a versatile press for woodworking and thermoforming applications. The VPR-3500 press features both tilting and mobile capabilities. Possible applications: - Veneering / Form gluing / Wrapping - Laminating various profiles (veneer, paper, plastic, etc.) - Wood bending: Production of curved and laminated components Vacuum system: Work surface with vacuum channels for even suction, including with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 3500 x 1500 mm Motor output: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Ex-stock 54634 Bitburg - free loaded - Gjdpodvldaofx Ab Tjkf

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Vacuum Membrane Press VP Series - the optimal solution for woodworking applications. The VP 3000 is equipped with advanced heating technology, which shortens glue drying times for increased productivity. Possible Applications: - Veneering / Form Laminating / Wrapping... - Coating of various profiles (veneer, paper, plastic…) - Wood bending: Production of curved and laminated components Features: - The heating system is equipped with temperature control - Rubber membrane, thickness: 2.5 mm - Worktable made from 12 mm plastic - Oil-free Becker vacuum pump, 25 m³/h - Vacuum control system / Tank capacity: 15 liters Technical Data: - Working area: 3000 x 1500 mm - Maximum heating system temperature: 60 °C - Heating system power: 4.5 kW - Pump motor power: 0.75 kW Gkjdpfsdvltyjx Ab Tef - Vacuum pump output: 25 m³/h - Rubber membrane - Exterior dimensions: 3100 x 1650 x 1600 mm - Weight: 450 kg Location: Ex-stock 54634 Bitburg - Free loading -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Gksdpoff Efcofx Ab Tjf Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Leto izdelave: 2013, Stanje: zelo dobro (rabljeno), Robust and compact bridge saw with fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Specially designed beam for maximum cutting precision; Water collection tray with integrated recirculating water system for blade cooling; Sturdy and compact construction. Front roller conveyor Rear roller conveyor Blade size: 350 mm Motor power: 2 kW Gkedpfxei Akvvj Ab Tef Voltage: 230 Volt Weight: 173 kg Mobile Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, HSBM 2020-20 SB - Manual Folding Machine HSBM SB - Heavy-Duty Manual Folding Machine with Segmented Upper Tools - Easy operation - Segmented upper tooling - Folding function with secure clamping of the workpiece via preloaded upper beam - Heavy-duty, compact welded steel construction - Simple bending with precise adjustment of the bending angle via a stop with scale - Particularly low maintenance requirements - Segment configuration: 25-30-35-40-45-75-100-150-200-200-270-400-400 mm Technical Data Note: Max. sheet thickness: All performance figures refer to material with tensile strength of 400N/mm²; Bending capacity stainless steel (VA): factor 0.75; Bending capacity aluminium: factor 1.2. Hardened upper tools are required for bending stainless steel (VA). Model: HSBM 2020-20 SB Article No.: 3772920 Technical Data - Max. working width: 2,020 mm - Max. bending capacity, steel 400 N/mm²: 2 mm - Max. bending capacity, steel 400 N/mm² without jaw extension: [data not specified] - Max. bending capacity, steel 400 N/mm² with jaw extension: [data not specified] - Max. bending capacity, stainless steel: 1.5 mm - Max. bending capacity, aluminium: 2.4 mm - Max. bending angle: 135° - Segment configuration: see above - Max. clearance between upper and lower beam: 120 mm Dimensions - Length: 2,500 mm - Width: 710 mm - Height: 1,500 mm - Weight: 1,020 kg Location: Ex works Gsdpfscnxc Njx Ab Tekf - loaded free of charge -

Stanje: novo, Leto izdelave: 2024, Your Advantages - Stable pressing mechanism with low-wear, chrome-plated pliers - Press chamber wear bushing - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control - Screw channel with discharge auger - Separate oil tank with pump motor and valve control - Safety switch for oil temperature - Mounted on a stable base frame with rubber feet - Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The machines of the C-series are particularly suitable for small and medium-sized businesses with a required throughput rate not exceeding 50–80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, such as wood, styrofoam, foam materials, paper, or biomass. All machines are available in left- or right-handed configurations. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput rate up to (kg/h): 50 (depending on material) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil volume (liters): 100 Weight (approx. kg): 800 Gkodpfscnz U Eex Ab Tjf Outstanding Features at a Glance - Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor designed for long operating periods - Briquette length monitoring: Controls briquette length for uniform sizing - Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loaded

Leto izdelave: 2025, Stanje: novo, Sandblasting cabins for clean blasting work without contaminating the working environment. Suitable for various abrasives, e.g. quartz, glass beads, plastic beads, among others. Ideal for cleaning, derusting or paint removal from all types of metal parts, e.g. engine components, fittings, signs, casings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Viewing window with adhesive protective film ensures optimum visibility and occupational safety during workpiece processing. Dust-free operation thanks to continuous seals on the lid and door frames. Sturdy support grid allows for positioning of workpieces inside the cabin. With drain port for easy media change. Suction tube for blasting material mounted on the bottom of the collection container. With compressed air connection on the exterior. Very large, upward-opening front flap with gas struts for quick and easy loading and unloading. Integrated extraction system with replaceable air filter. Blasting gun without trigger – airflow is controlled by foot pedal. 4 fluorescent tubes (230 volts), housed separately with protective glass and replaceable protective film, including 5 spare films. 2 separate switches for extraction and cabin lighting. Working pressure can be regulated via pressure regulator with manometer. Cross braces on the stand feet allow for easy transport with a pallet truck. Scope of delivery: High-quality blasting gun with ceramic nozzle 4 ceramic nozzles (4 / 5 / 6 / 7 mm) Incl. 5 spare films for viewing window Gkedpfxecqm Rwo Ab Tjf Technical data: Working cabin volume: 825 l Air consumption: 400-800 l/min Working pressure: 3.4 – 8.0 bar Compressed air connection: 3/8" Abrasive core size: 0.42 – 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Weight: Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Essentially a new machine, only used during our in-house exhibition (3 days) 5 operating hours Technical Data 300-P Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3 phase Voltage: 400 V / 50 Hz Gkedpfx Ajbqachjb Tef Max. air flow: 6,000 m³/h Nominal air flow: 5,089 m³/h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Ex stock 54634 Bitburg Available immediately Subject to prior sale

Stanje: novo, Leto izdelave: 2025, CASADEI PF 520 M Tersa – Jointer/planer for professional use, with 520 mm planing width and motorized adjustment of the infeed table - Oversized jointer tables made of hardened and stress-relieved cast iron - Rigid steel-cast iron design for precision and durability - The robust fence is easily adjustable and offers a generous support surface - Large fence, tiltable from 90° to 45° - Fence tilt angle can be read easily from the operator's position Godpfeb D Sbljx Ab Tskf - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision unit and heavy-duty cast construction - Powerful 7.0 kW (S6) motor - Maximum operator safety with the simplest operation Scope of delivery: - PF 520 M Tersa - Tilting auxiliary fence - TX-Matic planer cutterhead guard - Reinforced main motor 7.0 kW Technical data: Total length of jointer tables: 2960 mm Planing width: 520 mm Fence dimensions: 1100 x 160 mm Fence tilt range: 90° - 45° Max. depth of cut: 8 mm Cutterhead diameter / number of knives: 120 mm / 4 pcs. Speed: 5000 rpm Motor output 400 V / 50 Hz / P2 / S1: 7.0 kW (9.0 HP) Extraction port diameter: 120 mm Weight: Location: Ex-stock Bitburg Available for immediate delivery

Stanje: novo, Leto izdelave: 2025, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Gedpfx Abeg U Uv Ro Tokf Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Usable spindle length 100 mm Spindle shaft diameter 30 mm Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Telescopic mitre fence Gkodpfx Abshp Rcys Tef Aluminium fence jaws

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. Gkjdpfx Abshqb Rcs Tef A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Tehnični podatki: ALKO Reinluft – mobilna naprava za odsesavanje, tip Mobil-Power Unit APU 120, moč motorja 1,5 kW, sesalni nastavek Ø=120 mm, zvočno izolirana, premični ločevalni sod 135 l, Godpfxew T U Uzj Ab Tokf ročno čiščenje filtra, dimenzije: D=1.085 mm, Š=650 mm, V=1.985 mm, prostornina soda za prah: 135 litrov, teža: 117 kg, nazivni volumenski pretok (po čiščenju): 814 m³/h, Lokacija: iz zaloge 54634 Bitburg - na voljo takoj -

Stanje: potreben popravila (rabljeno), Leto izdelave: 2004, Schneider compressed air screw compressor - defective The unit requires repair. The machine is being sold at a low price as it needs to be repaired. Motor power: 11 kW Free air delivery: 1,500 l/min Max. operating pressure: 10 bar Location: ex stock 54634 Bitburg Gedpfsvmivcsx Ab Tekf The machine is sold as defective No warranty - no guarantee -