Vakuumska črpalkaBecker
BZ-2
Vakuumska črpalka
Becker
BZ-2
Leto izdelave
2020
Stanje
Rabljeno
Lokacija
Oberweis 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
- Lokacija:
- Gewerbegebiet Süd 6, 4664 Laakirchen, Österreich

Pokliči
Podrobnosti ponudbe
- ID oglasa:
- A21142922
- Referenčna številka:
- 200101
- Posodobitev:
- nazadnje dne 20.02.2026
Opis
Becker BZ-2 - Packaging System
- 2 identical, mirrored packaging lines available
- without sheet cutting machine
- Year of manufacture: 2020
The system first performs a trimming operation at the front of the cardboard to remove any potential transport damage. After trimming, an edge cut of at least 30 mm is taken off on both sides. Additionally, if necessary, a corner of the cardboard can be removed depending on the FEFCO type. Finally, the cardboard is creased at the folding points and conveyed out of the machine.
Waste generated during this process is transported out of the machine via a waste conveyor located underneath. At the machine’s exit, a conveyor belt disposes of the waste into a container. If the edge trim is too long, it must be cut within the system to ensure easy removal from the line.
The blanks and products are conveyed to the folding table, where the cartons are erected and filled. In the box closing unit, the cartons are sealed, labeled, and discharged from the system.
Machine Components (see schematic):
(1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor
Technical Data:
Ihsdeygipmopfx Adkow
Packaging dimensions (top closure):
- Min. carton dimensions (LxWxH): 500 x 120 x 100 mm
- Max. carton dimensions (LxWxH): 2250 x 420 x 320 mm
- Max. product weight: 50 kg
Packaging dimensions (side closure):
- Min. carton dimensions (LxWxH): 300 x 150 x 120 mm
- Max. carton dimensions (LxWxH): 1050 x 620 x 470 mm
- Max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions (WxHxD): 21260 x 4000 x 18030 mm
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
- 2 identical, mirrored packaging lines available
- without sheet cutting machine
- Year of manufacture: 2020
The system first performs a trimming operation at the front of the cardboard to remove any potential transport damage. After trimming, an edge cut of at least 30 mm is taken off on both sides. Additionally, if necessary, a corner of the cardboard can be removed depending on the FEFCO type. Finally, the cardboard is creased at the folding points and conveyed out of the machine.
Waste generated during this process is transported out of the machine via a waste conveyor located underneath. At the machine’s exit, a conveyor belt disposes of the waste into a container. If the edge trim is too long, it must be cut within the system to ensure easy removal from the line.
The blanks and products are conveyed to the folding table, where the cartons are erected and filled. In the box closing unit, the cartons are sealed, labeled, and discharged from the system.
Machine Components (see schematic):
(1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor
Technical Data:
Ihsdeygipmopfx Adkow
Packaging dimensions (top closure):
- Min. carton dimensions (LxWxH): 500 x 120 x 100 mm
- Max. carton dimensions (LxWxH): 2250 x 420 x 320 mm
- Max. product weight: 50 kg
Packaging dimensions (side closure):
- Min. carton dimensions (LxWxH): 300 x 150 x 120 mm
- Max. carton dimensions (LxWxH): 1050 x 620 x 470 mm
- Max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions (WxHxD): 21260 x 4000 x 18030 mm
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Dokumenti
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake














