Stroj Za Brušenje Cevi 10000 X 200 Mm nakup rabljenega (125.265)

Stanje: rabljeno, Leto izdelave: 2011, Pipe grinding machine – Custom-built - Pipe grinding machine with CE marking - Suitable for grinding or surface preparation of various pipes - Was used for galvanized steel pipes as a surface pre-treatment before painting - Could be modified for other materials (by using different sanding belts and possibly adapting the feed system) - Control: Mitsubishi - Automatic infeed and discharge from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored at the discharge station - Pipes are picked up by a gripper and fed through the machine to the discharge point - Including Felder RL125 extraction unit for dust extraction - Compressed air required for operation - Machine is sold without safety devices - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm Dkedpfxsx E T Swo Ab Hon - Connected load of the grinding machine: 6.75 kW - Connected load of the extraction unit: 3 kW - Installation footprint (without extraction unit): 2,500 x 20,500 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard Djdpfxjvdal Aj Ab Hskn X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 1979, Roundo valjar za pločevino/cevi. V zadnjih letih se je uporabljal predvsem za valjanje dimnih cevi s premerom 150–160 mm. V kompletu so štiri palete z valji, ki služijo za določitev premera cevi. S pomočjo pnevmatskega valja se konec odpre, da se izvleče zvita cev. Stroj sem preizkusil, vendar valji ne delujejo. Verjetno obstaja enostavna rešitev za to. Skupna teža stroja in valjev je približno 3–4 tone. Dedsyvqc Ujpfx Ab Hjkn

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. Dodpfx Abey E Schs Hokn - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: PLEIGER Model: HF 75 / 115 S 30 Control: Siemens Simatic panel Year of manufacture: 2002 Stroke speed, feed step 1: 4 - 20 m/min Stroke speed, feed step 2: 0.3 - 3 m/min Chuck rotation speed step 1: 300 rpm and 320 Nm Chuck rotation speed step 2: 100 rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Max. bore depth: 11,500 mm Spindle power: 55 kW Rotational speed: 300 rpm Dedpfxjkvnc So Ab Hekn Dimensions (approx.): Length: 25,000 mm Width: 2,000 mm Height: 2,000 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, sourced from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Consequently, it does not constitute any representation or contractual terms. We recommend verifying all key details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Dkodpfx Abjrx Rxtj Hsn Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: novo, Leto izdelave: 2026, Max Ø 114mm. Straight and bent round tubes. Single grinding station. Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. Dkedpfet Eaw Dsx Ab Hen The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical pipes. The ML planetary belt system enables belt grinding without tube rotation in order to deliver the best possible results. The infeed system safely feeds straight tubes into the grinding station to ensure consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Belt speed (m/s): 3-22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Power consumption (A): 11 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Na voljo je mokra cevna brusilka Rema. Moč motorja: 4 kW, hitrost motorja: 1450 o/min, območje premera cevi: 8 mm–100 mm, dimenzije brusnega traku X/Y: 740 mm/30 mm. Dokumentacija na voljo. Ogled na lokaciji je mogoč. Dodpfjzcflpsx Ab Hjkn

Stanje: novo, Edge sanding machine HOLZKRAFT KSO 200 F - Demonstration machine - Relief rollers on the fence guides, Djdpfju R S Erex Ab Hjkn with tiltable sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubber-coated sanding roller ----- Technical Data ----- Sanding belt dimensions: 3,000 x 200 mm, Worktable dimensions: 960 x 350 mm, Worktable height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Extraction port diameter: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new demonstration machine -

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Dkodpfx Abjv S Ad Do Hen Strip width: 600 – 2,000 mm Strip thickness: 6 – 15 mm Design: 4-Hi cassette

Stanje: rabljeno, Disc sanding machine with spindle sanding unit KURT EHEMANN Type V K8 Combined drum sander - double grinding machine, dowel sanding machine Machine no. 6812420 Year of manufacture: 1968 Disc diameter: 800 mm Table support at sanding disc: 900 x 300 mm Disc speed: 940 rpm Table height (sanding disc): 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support (spindle sanding unit): Ø 500 mm Table height (spindle sanding unit): 1000 mm Spindle sanding speed: 1410 / 2420 rpm, 2-speed pole-changeable Motor power disc: 3 kW Motor power spindle: 1.1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Tiltable disc sanding table: 30° downward / 15° upward - The entire table can be swung away from the disc for abrasive change - Spindle sanding unit with reversible rotation (1410 rpm clockwise, 2420 rpm counter-clockwise) - Spindle sanding unit with oscillating stroke movement, 10 mm - Sanding spindle height-adjustable within the table Djdsrk U Edspfx Ab Hekn - Spindle sanding unit with tiltable round table, tiltable approx. 30° - Round table with removable segment inserts Ø 54 / 84 / 308 mm - Duct connection for extraction unit, rectangular 100 x 170 mm Space requirement (L x W x H): 1500 x 1100 x 1400 mm Weight: 550 kg Very good condition

Stanje: rabljeno, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 Serial No. 49697 Year of manufacture: 1997 Grinding range: Ø 3 - 40 mm Point angle: 40° - 180° Motor power: 1.1 kW Grinding wheel dimensions: max. Ø 200 mm Grinding wheel speed: 2840 rpm Power supply: 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, thread taps, countersinks, drills with reinforced webs, and drills with special grinds) - Precision six-jaw chuck Ø 125 mm - Drill point thinning device (motor power 0.18 kW) - Suitable for left- and right-hand cutting drilling tools thanks to interchangeable cams - Cam discs easily exchangeable for 2- or multi-edged tools - Includes 4 cam discs - Centering arbor for MT1, MT2, MT3, MT4 - Fitted with a white grinding wheel Ø 170 mm, 40 mm wide - Metal base with door and shelf - Adjacent wet grinding unit - Operating manual in PDF Dsdpfxonzt A Ho Ab Hokn Space requirement (L x W x H): 900 x 850 x 1250 mm Weight: 220 kg Very good condition

Stanje: rabljeno, Straightening machine for strip material from coil WANZKE Type RG 400-7 Strip processing line for coil operation Machine No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roller width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roller width, straightening rolls: 408 mm Number of straightening rolls (top): 3 pieces (not driven) Number of straightening rolls (bottom): 4 pieces (driven) Straightening roll diameter: 50 mm Feed rolls: 2 pieces Ø 50 mm (bottom one driven) Feed roll width, top: 390 mm Feed roll width, bottom: 408 mm Strip speed: approx. 5 – 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain Djdpfx Aoxw Rcuob Hokn - Loop control with speed regulation in 2 stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of upper rollers via eccentric lever - Adjustable lateral strip guide on the entry side - 2 roller baskets for strip guiding - Electrical diagram included Space required for straightening machine with control: L x W x H 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Stanje: dober (rabljeno), Manufacturer: Keilinghaus Type: PLS 1500 HY Specifications Metric / US Standard Max. swing over bed: 3000 mm Max. swing in gap: 5000 mm Ø Center height over bed: 1500 mm Distance between centers: 2600 mm Max. sheet thickness: 15 mm X-axis stroke: 1000 mm Y-axis stroke: 2800 mm Speed: 240 rpm Power: 75 kW Spindle nose: DIN 55027 - Size 15 DIN / Camlock Tailstock quill: 1200 mm Approximate dimensions Length: 10000 mm Width: 8000 mm Height: 4500 mm Weight: 60000 kg Dkjdpjkvnnkefx Ab Hjn Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. All information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Stanje: potreben popravila (rabljeno), premer brušenja: 1.295 mm, dolžina brušenja: 4.276 mm, Manufacturer: Farrel Model: 50 x 14 CNC Control: NUM 760 Year of Manufacture: 1970 Djdpfxjv Dia Ae Ab Hekn Are you looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring outstanding accuracy and efficiency. Key Features: - Capable of concave grinding - Capable of convex grinding - NUM 760 CNC Control - 2 x fixed steady rests - Grinding wheels and flanges included Specifications Metric | US Standard ---|--- Centre height | 647 mm Grinding diameter Ø | 1295 mm Grinding length | 4267 mm Grinding wheel size | 914 x 152 mm Grinding wheel speed | 400 - 1200 rpm Coolant system | Yes Dimensions (approximate): - Length: 8500 mm - Width: 4500 mm - Height: 3200 mm - Weight: 78,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The data is offered in good faith, but accuracy cannot be guaranteed. As such, no representations or contractual terms are implied. We recommend verifying all critical details independently.

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Dedpfx Abewpku Dj Hskn Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: dober (rabljeno), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting: up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Overhang: 500 mm Number of strokes: 3 – 38 m/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Dodowpud Aspfx Ab Hokn Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The data is supplied in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or terms of contract. We recommend verifying all critical information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Max Ø 114mm; Straight and curved round tubes; One grinding station; Grinding of straight and curved round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. Dksdpfx Ajtzkgbeb Hsn The ML planetary belt system allows for belt grinding without rotating the tube, delivering optimal results. The feeding system safely advances straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3-22 Feed speed (m/s): 1-5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Premer cevi (maks.): 28 mm, Kot upogiba (maks.): 180 °, upogibna sila (maks.): 7 t, skupna masa: 250 kg, Bending capacity: 3/8" – 2" Djdpewzchyefx Ab Hskn Bending angle: 180° Rotary turret: 6-fold Installed bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine dimensions (LxWxH): 1,000 x 800 x 950 mm

Stanje: zelo dobro (rabljeno), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Dsdpfx Absn Smq Is Hjkn Turret: 12-position adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 mandrels - Mandrel retraction device - Foot pedal - Adjustable bending speed Country of origin: The Netherlands Motor power: 7.5 kW Machine dimensions (LxWxH): 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Stanje: rabljeno, Deburring brush machine, tube deburring machine ERINI Type 250 Year of manufacture: approx. 1995 Brush diameter: 250 mm Brush width: 25 - 60 mm Dsdjpu R Ngepfx Ab Hskn Speed: 1500 / 3000 rpm Power: 2.2 / 2.8 kW Power supply: 380 Volt, 50 Hz - Material support - new deburring brush - Extraction connection Ø 100 mm Dimensions (L x W x H): 620 x 500 x 1150 mm Weight: 100 kg In good condition

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Dkjdpetmqi Defx Ab Hen The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. Dedpepugwiefx Ab Hskn The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: rabljeno, Guillotine Shear, Sheet Metal Guillotine Shear DIGEP Type OL 3 Workshop-reconditioned guillotine shear Dedpfjlpkcnsx Ab Hjkn Serial No. 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Maximum cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Simple back gauge: 500 mm Frame throat: 200 mm Cutting angle: 2° Stroke rate at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Mains connection: 380 Volt, 50 Hz - LED illumination of the cutting area - Simple back gauge with manual adjustment - Mechanical foot switch - Front left squaring arm - 1 piece front sheet support 300 mm Required space L x W x H: 1660 x 1350 x 1200 mm Weight: 1600 kg In good condition