Komora Za Emisijski Preskus nakup rabljenega (84.862)

Stanje: zelo dobro (rabljeno), Weiss We offer here a Weiss emissions test chamber. Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 mm (Usable height: 1600 mm) Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Ledpfemfny Iex Adlorl Operating range: +18 °C ... +45 °C (for higher temperatures, SHED operation is only possible without Tedlar bags) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, at rear of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ +18-45 Condition: used Sale from site Scope of delivery: (Only the Weiss emissions test chamber WT 5.1'/ +18-45 Mini-SHED) (Subject to changes and errors in technical data, specifications may be subject to revision!) For further questions, we will be happy to assist you by phone.

Stanje: dober (rabljeno), Manufacturer: LIEBISCH Type: 42016001 Test chamber: 1000 liters Lodpfx Ajpbv Dpodljrl

Leto izdelave: 2000, obratovalne ure: 104.382 h, stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, alternating between upper and lower temperature levels under varying load conditions. Through these cyclic stresses and temperature-change-induced accelerated aging, potential weaknesses in the specimen can be identified. Ljdjx Exmtopfx Adlsrl - Vertical arrangement of test chambers - Ball screw drive for secure carriage guidance - Carriage load capacity: 50 kg (VT3 7012 S2) - All-around mesh baskets secure the test specimens - High air circulation rate for short temperature change times and even temperature distribution in the test chamber - Warm chamber can be used as a temperature storage unit; cold chamber can be used as a temperature cycling unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Rated Voltage: 400 V Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452A Cooling Unit: Water-cooled Shock Cooling (nitrogen cooling) via customer-supplied liquid nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class: Device: IP 42 Control unit: IP20 Switch cabinet: IP 54 Key Parameters for Temperature Tests in Single-Chamber Operation: Temperature Range: Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K (in steady state) Temperature deviation spatially: ±2 K (in steady state within carriage) Warm chamber heating rate: 11 K/min Cold chamber cooling rate: K/min Cold chamber heating rate: 2 K/min Warm chamber cooling rate: K/min Observation window: 355 x 355 mm Cable port: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg Financing through our partner bank is available. komplett-konzept.leasingo.de More articles—new and used—can be found in our shop! International shipping rates upon request!

Stanje: zelo dobro (rabljeno), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Test Chamber, model SAL 1000-FL PLC, ideal for industrial corrosion testing in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Special features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation, and air ventilation tests Technical details: - Outer material: stainless steel 1.4301, powder-coated (custom version) - Test chamber material: stainless steel, ECTFE-coated - Max. test chamber temperature: +80 °C - Temperature stability: ±0.3°K, over time ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Water consumption (humidifier): approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm - Including base cabinet: 2160 x 670 x 1890 mm - Internal test chamber dimensions (W x D x H) / Volume: 1400 x 605 x 920 mm / 1040 l Ledpfsxnyqvjx Adljrl - Max. load on specimen support rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see images) (Specifications and technical details subject to change and correction!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: - Temperature range, hot chamber: +60°C to +220°C Lrodpfxok E Htye Adljl - Temperature range, cold chamber: -10°C to -80°C - Transition hot/cold chamber: 10 s - Temperature stability: ±1 K Dimensions and further data: - External dimensions: height 1990 mm - Width (without/with swing arm): approx. 1820 mm / approx. 1915 mm - Depth (without/with test chamber door): approx. 900 mm / approx. 1155 mm - Lifting basket (test chamber) dimensions: height 450 mm, width 500 mm, depth 600 mm - Volume: 130 liters - Max. load for test chamber: 20 kg - Max. load for test chamber floor: 20 kg - Cooling water pressure: min. 2 to max. 6 bar - Max. pre-fuse: 35 A (32 A CEE plug) - Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerant: R 404A / R23 - Weight: approx. 950 kg - Type: TS 130 - Condition: used - Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a temperature test chamber. Water-cooled Technical performance data: Temperature working range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerants: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your security as a buyer, please note the following information! The following actions are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilled with compliant refrigerant according to regulations 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see pictures) (Subject to modifications and errors in technical specifications and details!) Lodpfx Asyguprodljrl We are happy to answer further questions by phone.

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 53, Proving chamber pentru 8 cărucioare, marca Pietroberto, tip PB-CF10T, anul fabricației 2007, seria 53, fabricat în Italia. Volum cameră de fermentare: 12,02 mp ▪ Putere: 4 kW ▪ Element de încălzire dublu: 1,8 x 2 kW ▪ Temperatură maximă: 45°C ▪ Motor ventilator Siemens: 0,25 kW ▪ Umiditate maximă: 90% ▪ Prevăzută cu ferestre de vizualizare la fiecare ușă ▪ Cameră prevăzută cu 4 uși pe ambele părți ▪ Echipată cu întrerupătoare electromecanice ▪ Control digital ▪ Barieră de protecție, pereți interiori și exteriori din oțel inoxidabil ▪ Unitate de aer condiționat și ventilatoare din inox ▪ Reglare constantă a temperaturii și umidității aerului ▪ Dimensiuni exterioare (LxlxÎ): 2.500 mm x 2.000 mm x 2.300 mm ▪ Dimensiuni interioare (LxlxÎ): 3.250 mm x 1.850 mm x 2.000 mm ▪ Structură și cadru complet din aluminiu, doar structura! ▪ Necesită o sursă de apă independentă, cu filtru pe faza de intrare. Camera de dospire este corect demontată și depozitată pe paleți, având inclus și schița de asamblare realizată la momentul demontării. Preț: 2.400 Euro + TVA, FCA Oradea/România NOTĂ: Anunțul de față nu reprezintă o ofertă fermă din partea noastră către terți, și nu conține o solicitare pentru depunerea unei oferte ferme către noi. Acest anunț are rol exclusiv informativ, ca punct de pornire pentru eventuale negocieri contractuale ulterioare. În cazul în care sunteți interesat(ă) de utilaj, vă invităm să ne contactați fără obligații, folosind datele noastre de contact sau funcția „Trimite mesaj”, menționând în fiecare caz numărul de telefon și adresa de e-mail. Ulterior, vă vom transmite cu plăcere condițiile noastre comerciale și o ofertă. Ledpfx Aem Uywaedljrl Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français / Vorbim româna.

Obratovalne ure: 3.888 h, stanje: dober (rabljeno), Heraeus naprava za preizkušanje vremenske odpornosti Xenotest 1200 CPS Xenonska naprava za testiranje svetlobne obstojnosti in vremenske odpornosti materialov v simuliranih pogojih Električni priključek Napetost: 400 V Nazivni tok: max. 50 A Priključna moč: max. 33 kVA Poraba moči xenonskih svetilk: 2,8 - 6 kW na svetilko Kompenzacija: 3 kondenzatorji po 50 uF Lredpfx Adjxal Haolol Obratovalne ure: 3888 Financiranje preko naše banke je prav tako možno. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: zelo dobro (rabljeno), Weiss SC 1000/+20 IU Corrosion-Climate Alternating Test Chamber Weiss SC 1000/+20 JU Corrosion-Climate Alternating Test Chamber The test system combines a climate test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. In accelerated testing, susceptible metallic components are inspected for corrosion in accordance with relevant standards. Temperature Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K Climate Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K relative humidity: 10...98 % r.h. temporal humidity deviation: 3...5 % r.h. dew point: +12 °C ... +59 °C Salt Spray Test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt mist via 2-substance nozzle, 1.5 x 0.5 m V80 cm³/h) Control Digital measuring and control system SIMCON/32*-Net with touch control panel Interfaces - serial interface RS 232 C - parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Climate mode - Salt spray test - Direct spraying with saline solution - Condensation water load - Rinsing of test chamber walls - Drying/ventilation of the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measurement device tft’ (with forced humidification) Technical Data SC 1000/+20 JU Internal dimensions Height up to eaves approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including aggregate parts and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected load: 13 kW Lrsdpfxoph U Dhe Adlol Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Heraeus shock test chamber We offer a shock test chamber for sale. Temperature shock test cabinet, water-cooled Two-chamber design Hot chamber: Temperature range of the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the test space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate (heating): 11 K/min Cold chamber: Temperature range of the cold chamber: -65°C to +70°C Temporal temperature deviation at the center of the test space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Power rating: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Lsdpfxsikvlxe Adlerl Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following points are carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a test run monitored by calibrated equipment. Type: HT 7012 S2 Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber Lsdpfx Adsn Avcuoljrl We are offering you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Hot chamber: +50°C to +220°C Intermediate chamber: -10°C to +90°C Cold chamber: -80°C to +70°C Mains voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant HC: R 404A 3.00 kg p*: 25 bar Refrigerant CC: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, the following procedures are carried out on all chambers offered by us: 1. Functional testing and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled Specification: Temperature range hot chamber: +60°C … +220°C Temperature range cold chamber: -10°C … -80°C Transfer time hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and additional data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm / with approx. 1155 mm Basket dimensions (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber load: 20 kg Maximum floor load in test chamber: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum main fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cooling cascade: water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information not binding!) Ljdpfjlgux Aex Adljrl If you have any further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Espec Model: TSD-100 100 liters usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Lrodsugl H Sepfx Adlol Temperature range (hot chamber): +60°C to +200°C Temperature range (cold chamber): 0°C to -70°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile version (on castors) 2 stainless steel specimen baskets Cable feedthrough, Ø 100 mm Refrigerants: R404A 1 kg, R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we are offering a shock test chamber. Temperature Shock Test Chamber, Water-Cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold chamber: The cold chamber ranges from -65°C to +70°C Temperature deviation over time at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, hot chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+ mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 h Weight: 1000 kg Important safety information for you as the buyer! The following measures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run, monitored using calibrated instruments. Model: HT 7012 S2 Condition: used Scope of delivery: (see picture) Ljdpfx Aei Az Egedlerl (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature shock test chamber with a usable volume of 100 liters, suitable for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Lrodpsn Smtmefx Adlsl Temperature range, hot chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design 2 stainless steel test specimen baskets Cable feedthrough Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See picture) (Technical changes and errors excepted!) If you have any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, water-cooled Specification: Temperature range hot chamber: +60°C to +220°C Temperature range cold chamber: -10°C to -80°C Transfer between hot/cold chamber: 10 sec. Temperature constancy: ±1 K Lodpfxsm Ak H Ho Adlorl Dimensions and further data: External dimensions: Height 1990 mm Width (without/with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without/with test chamber door): without approx. 900 mm / with approx. 1155 mm Internal basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Max. chamber load: 20 kg Max. floor load test chamber: 20 kg Cooling water pressure: min. 2 to max. 6 bar Max. main fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) For further questions, we are happy to answer your call.

Stanje: zelo dobro (rabljeno), Weiss Thermal Shock Test Chamber We are offering you a thermal shock test chamber. Weiss Thermal Shock Test Chamber, water-cooled Specifications: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Transition between hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm, with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber loading: 20 kg Maximum load on test chamber floor: 20 kg Ljdpfjlmkn Tox Adlerl Cooling water pressure: min. 2 ... max. 6 bar Maximum pre-fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 18.7 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see image) (Technical data subject to modifications and errors!) Further questions can gladly be answered by phone.

Stanje: rabljeno, Leto izdelave: 1994, Sušilna komora / Krožna sušilna komora / Komora za sušenje lesa / Sušilna naprava Mühlböck QLSF Zunanje dimenzije: Dolžina: 10,3 metra Širina: 4,2 metra Višina: 4,15 metra Notranje dimenzije: Dolžina: 10,1 metra Lrsdpfx Ajy Tt Easdlel Širina: 3,01 metra Višina: 4,0 metra Tehnični podatki: Leto izdelave: 1994 Temperatura dovoda: 95 stopinj Ventilatorji: 7x0,75 kW Takoj na voljo Lokacija: Avstrija, v bližini Ried im Innkreis

Stanje: rabljeno, Leto izdelave: 1995, Sušilna komora / Krožna sušilna komora / Komora za sušenje lesa / Sušilna naprava Mühlböck QLSF Zunanje mere: Dolžina: 13,3 metra Širina: 4,2 metra Lsdoy Tt Axepfx Adljrl Višina: 4,15 metra Notranje mere: Dolžina: 13,1 metra Širina: 3,01 metra Višina: 4,0 metra Tehnični podatki: Leto izdelave: 1995 Ogrevalna moč: 205 kW Temperatura dovoda: 90 stopinj Količina vode: 16 m³/h Ventilatorji: 9x0,75 kW Takoj na voljo Lokacija: Avstrija, v bližini Ried im Innkreis

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, 385 RABLJENA hladilno-dokazovalna komora, dokazovalnica Lilnord. OPOMBA: Naprava brez nadzorne plošče. ZUNANJE MERE (v cm): - višina: 249, - dolžina: 350, - širina: 197. NOTRANJE MERE (v cm): - višina: 198, - dolžina: 225, - širina: 160. Naveden cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO. Lredpfxjy Tg Sme Adljl V naših skladiščih imamo na voljo številne pekarske peči: etažne peči, rotacijske peči, plinske, oljne, električne, različnih proizvajalcev. Nudimo tudi pekarske stroje, opremo, linije za žemljice, linije za kruh. Če želite videti našo celotno aktualno ponudbo, obiščite naš profil Bakeres.

Stanje: dober (rabljeno), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant as per labelling: R452A – approx. 1.2 kg Features: Touchscreen control Program and constant operation modes Temperature and humidity operation Lredpfx Asy N Awqedlol Observation window in the door Stainless steel test chamber Interior illumination / chamber lamp Side cable/tube port Ø approx. 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used unit with age- and use-related wear. Some rust and corrosion present in the lower housing area. Interior with signs of use. See photos for optical condition. Scope of delivery: ESPEC climate test chamber PL-3KPH Shelf included Delivery as pictured Service: Functional check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by appointment. Loading can be organized. Commercial sale – sold without warranty. Subject to change and error.

Stanje: zelo dobro (rabljeno), Vötsch Thermal Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a Vötsch thermal shock test chamber in a two-zone configuration for rapid temperature cycling tests. Suitable for use in industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: - Hot chamber: +50 °C to +220 °C - Cold chamber: -80 °C to +70 °C Temperature Data: - Temporal temperature deviation: ±1 K - Spatial temperature deviation: ±2 K - Heating rate (hot chamber): approx. 11 K/min - Heating rate (cold chamber): approx. 2 K/min - Cooling rate: approx. 3 K/min Test Space: - Volume: approx. 125 liters - Internal dimensions: approx. 470 x 650 x 410 mm - Cable port: Ø 67 mm Electrical Data: - Connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated power: approx. 10 kW - Rated current: approx. 25 A Refrigerants: - R404A: 2.9 kg - R23: 1.27 kg Pressure Data: - ND max.: 22.5 bar - HD max.: 25 bar Dimensions: - approx. 930 x 2115 x 1970 mm Weight: - approx. 1000 kg Equipment: - Two-chamber shock test system - Digital control - Programmable operation - Observation window - Cable port Condition: - Used - Control system overhauled and newly rewired - Control panel replaced - Spindle and spindle motor replaced - Plate heat exchanger insulated Scope of delivery: - Vötsch VT 7012 S2 thermal shock test chamber - Accessories as shown in the pictures Inspection possible by appointment. Lodpfx Adoy Iyuweljrl Loading can be arranged. Sale without warranty. (Subject to change)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Naprodaj je komora za solno pršenje za enostavno preverjanje odpornosti na rjo kovinskih delov in premazanih površin. V zaprti komori so deli izpostavljeni finemu solnemu pršenju, da se korozija pokaže v realnih pogojih. Naprava je jasno zasnovana in primerna tudi za uporabnike brez posebnega strokovnega znanja. Komora za solno pršenje je delujoča (še v uporabi) in lepo ohranjena. Ključni podatki so razvidni iz priloženih slik. Lrjdpfx Adjx Uz Hhjlel

Stanje: zelo dobro (rabljeno), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40 °C to +180 °C Humidity range: 20% to 98% rH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Features Touchscreen control panel Programmable and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Interior lighting Cable port Overheat protection Hour meter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Optional Pre-Delivery Service Functional testing Refrigerant service Leak test Test run with protocol Condition Lredey H H Iujpfx Adljl Used. Condition as per pictures. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to prior sale and changes. If you have any questions, please contact us.

Stanje: rabljeno, Leto izdelave: 1909, 3D Systems ProCure 750 Used for curing 3D-printed parts during the development phase at an automotive manufacturer. Ljdpfev Upuuex Adlorl All lamps are functioning, and the turntable rotates smoothly.