Jd Ø2,0 Mm/2-Osni Stroj Za Stiskanje Vzmeti nakup rabljenega (130.932)

Stanje: novo, Stroj za tlačne vzmeti Ø2,0 mm/2-osni. Pogon s pomočjo odmičnika (cam-driven). Lhedpfxelf Ek Dj Adlsg

Stanje: rabljeno, Nibbling machine, nibbler, power nibbler, sheet metal shear, circular shear - Power output: 330 watts - Voltage: 220 V - Maximum cutting capacity: 2 mm Lsdod R N Igspfx Adlehg - Dimensions: 280/60/H150 mm - Weight: 2.3 kg

Stanje: rabljeno, Leto izdelave: 1979, Roundo valjar za pločevino/cevi. V zadnjih letih se je uporabljal predvsem za valjanje dimnih cevi s premerom 150–160 mm. V kompletu so štiri palete z valji, ki služijo za določitev premera cevi. S pomočjo pnevmatskega valja se konec odpre, da se izvleče zvita cev. Stroj sem preizkusil, vendar valji ne delujejo. Verjetno obstaja enostavna rešitev za to. Skupna teža stroja in valjev je približno 3–4 tone. Lhsdpfsyvqc Uox Adlog

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 451 PORTATİF KESİM MAKİNASI Ø400 mm, • Uporablja se za rezanje aluminijastih in PVC profilov • Žaga z diamantno konico • Dvojni vzmetni sistem in varnostni pokrov žage pri rezanju • Možnost rezanja na zgornji mizi pod katerimkoli kotom med -45 in +45 stopinjami Ljdpfxercm Abo Adlohg • Fiksacija kota na desni in levi pri 0, 15, 22,5, 30, 45 stopinjah MOŽNOSTI • Sistem spodnje omare • Desno-levo metrični sistem • Pnevmatski prešni in hladilni sistem

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 441 Portatif Kesim Makinası Ø300 mm, • Used for cutting aluminium & PVC profiles • Dual spring system and saw guard safety during cutting • Capability to cut at any desired angle between -45° and +45° on the upper table • Angle locking at 0°, 15°, 22.5°, 30°, and 45° to the right and left OPTIONS • Lower cabinet body system Lhodpfxjrcmzds Adljg • Right-left metric stop system • Pneumatic pressing and cooling system • Diamond-tipped saw blade

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, globina grla: 2.700 mm, najv. debelina pločevine: 13 mm, najv. debelina jeklene pločevine: 13 mm, skupna masa: 2.120 kg, skupna širina: 1.200 mm, skupna dolžina: 4.500 mm, skupna višina: 2.000 mm, potrebna višina: 2.300 mm, zahteva za prostor dolžina: 4.800 mm, vhodna napetost: 400 V, Obnovljen in v odličnem stanju Pullmax Kumla F13C stroj za obrobljanje robov na prodaj. Obrobljanje jeklenih pločevin do 13 mm, obrobljanje nerjavečih pločevin do 10 mm! Ljdpfsy Tni Tsx Adlehg

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Lhjdpjy E Schofx Adlsg Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 902, skupna masa: 125 kg, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, Nudimo popolnoma nov stroj za stiskanje in oblikovanje robov OSTAS KMRP 1.2, letnik izdelave 2024. Moč motorja: 0,75 kW Delovna napetost: 380 V Frekvenca: 50 Hz Lhsdpfx Ajy E Hmhjdljg Hitrost valjev: 50 obr/min Skupna teža: 125 kg Leto izdelave: 2024 Za dodatna vprašanja ali informacije nam lahko pošljete sporočilo ali nas pokličete.

Stanje: rabljeno, 12-piece die block for GEWA press brake Press brake tool for press brake, lower tool Type: 0255/14 V-opening size: 16 mm for 90° V-angle: 88° Die depth: approx. 8 mm Overall height: 120 mm Max. pressing force per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: Lhjdpfswbvmisx Adlsg 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Stanje: rabljeno, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 Serial No. 49697 Year of manufacture: 1997 Lhsdpfx Asnzt A Hsdlsg Grinding range: Ø 3 - 40 mm Point angle: 40° - 180° Motor power: 1.1 kW Grinding wheel dimensions: max. Ø 200 mm Grinding wheel speed: 2840 rpm Power supply: 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, thread taps, countersinks, drills with reinforced webs, and drills with special grinds) - Precision six-jaw chuck Ø 125 mm - Drill point thinning device (motor power 0.18 kW) - Suitable for left- and right-hand cutting drilling tools thanks to interchangeable cams - Cam discs easily exchangeable for 2- or multi-edged tools - Includes 4 cam discs - Centering arbor for MT1, MT2, MT3, MT4 - Fitted with a white grinding wheel Ø 170 mm, 40 mm wide - Metal base with door and shelf - Adjacent wet grinding unit - Operating manual in PDF Space requirement (L x W x H): 900 x 850 x 1250 mm Weight: 220 kg Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22499, skupna masa: 545 kg, Višina stiskanja 140 mm Stiskalna sila 70 kN (7 t) Pnevmatski pogon Napajanje 230 V, 1~, 50/60 Hz Lhodpfoyyq Dmsx Adleg Dovod stisnjenega zraka 7 bar Poraba zraka na delovni cikel 35 l Dolžina 1.100 mm, globina 950 mm, višina 1.230 mm, teža 545 kg Za stiskanje profilov velikih dimenzij pri najvišjih zahtevah glede kakovosti Stroj je enostaven za nastavitev in upravljanje, s kratkimi časi menjave zaradi preprostega sistema zamenjave rezil Izjemno visoka stiskalna sila zaradi velikovolumenskega mehastega cilindra (brez vzdrževanja) Z izvlečnim, hidro-pnevmatsko krmiljenim protinastavkom Posebej oblikovana glava protinastavka omogoča stiskanje okvirjev z notranjo mero že od 150 mm (čista mera) Globina stiskanja se lahko nastavi ločeno za vsak voziček z orodjem Na voljo je tudi nastavljivo stiskalno rezilo za kompenzacijo zamika profilne komore Nosilne roke in stiskalna rezila vključene v standardni opremi Stroj je pripravljen za obratovanje. Ponujamo možnost dostave.

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Nazivni tok: 22A, priključna moč: 15kVA, z obsežno dodatno opremo, stroj je popolnoma delujoč. Ogled na lokaciji je mogoč. Lhodpfx Aey Tx Sxsdleg

Leto izdelave: 2004, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Stroj za avtomatsko stiskanje cevno ploščnega uparjalnika. Lodpfeyt Sqgsx Adljhg

Stanje: novo, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other highly precise, complex 3D components. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the highly robust machine frame and rotary table deliver top quality. The user-friendly fixture system allows you to save time. Thanks to components from leading manufacturers and the use of high-quality materials, no maintenance or service is required. High-quality 3D cutting can be achieved. This technology reduces energy consumption and increases company profitability. The machine stands out for its speed, reliability, and design. HD-FA Technical Data Available in 2, 3, and 4 kW X-axis: 3,000 mm Lhedpfeg Adknex Adljg Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360°xn Max. vector speed: 173 m/min Max. vector acceleration: 1.73 G Positioning tolerance: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6,168 mm x 3,936 mm h = 3,700 mm Working area: 9,000 mm x 10,000 mm (safe area) Rotary table door clearance: 4,000 mm Machine weight: 16,000 kg Cutting head: Type: 3D Focus type: Automatic Controller: CNC Siemens Sinumerik 840D SK Display: 19-inch touchscreen Filter Capacity: 2,500 m³/h – 4 kW

Stanje: rabljeno, 2-Station Notching and Press Brake Machine EUROMAC Type Multi 220/6R Press Brake, Notching Machine Serial No. M11941298 Year of Manufacture: 1998 Cutting Capacity: 6 mm steel at 45 kg/mm² 4 mm for stainless steel Station I (Notching) Notching angle: 60° to 140° (with special blade from 30° to 140°) Blade length: 220 mm Table size: 950 x 640 mm - Manual angle adjustment via handwheels Lhsdpfx Aomck Ryjdlog - Notching angle with installed blade set: 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic cutting clearance adjustment - Sheet hold-down device - Integrated, scaled measuring tapes in the table - Adjustable stop rails with angle setting - Operated by foot pedal Station II (Press Brake Unit) Pressing force: 18 t Table size: 950 x 340 mm Working height: 1100 mm - Infinitely variable stroke speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible die with 4 x 90° prism, length = 415 mm - Top tool 90°, length = 415 mm Motor power: 4 kW Power connection: 400 Volt, 50 Hz Space requirement (L x W x H): 1150 x 1050 x 1460 mm Weight: approx. 1000 kg Good condition

Stanje: rabljeno, Leto izdelave: 1996, Overview This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has a capacity of 29,000 bottles per hour. The machine has undergone several upgrades, including the installation of an S7 control system, lye filtration with drum screen, and pH value monitoring for hot water circuit 1. The machine will remain in operation until the end of January 2026 and can be inspected in person at any time until then. Technical Details - Capacity: 29,000 bottles/hour Lhsdpfxevxtavj Adleg - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Equipment & Upgrades - Plastic bottle cell with 110-pitch spacing - Suitable for swing-top bottles - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Upgrades: - Retrofit S7 control system - Drum screen for lye filtration - Guardrails on the machine - Swing-top specific lye spraying at the return section Cleaning & Heating System: - Rotating spray systems - Heating via shell and tube heat exchanger and hot water - Lye concentration measurement and dosing control, including post-lye - pH value measurement for hot water circuit 1 Soaking & Rinsing System: - Double pre-soak with sieve belt - Lye volume: 30 m³ - Post-lye, hot water 1, hot water 2, cold water and fresh water rinses - Head section can be damped and cleaned with disinfectant - H₂ extraction system

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Lhodpfxoxmt Eqj Adlsg

Stanje: dober (rabljeno), Manufacturer: Keilinghaus Type: PLS 1500 HY Specifications Metric / US Standard Max. swing over bed: 3000 mm Max. swing in gap: 5000 mm Ø Center height over bed: 1500 mm Distance between centers: 2600 mm Max. sheet thickness: 15 mm X-axis stroke: 1000 mm Y-axis stroke: 2800 mm Speed: 240 rpm Power: 75 kW Spindle nose: DIN 55027 - Size 15 DIN / Camlock Tailstock quill: 1200 mm Approximate dimensions Length: 10000 mm Width: 8000 mm Height: 4500 mm Weight: 60000 kg Lhedekvnnkspfx Adlog Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. All information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: PLEIGER Model: HF 75 / 115 S 30 Control: Siemens Simatic panel Year of manufacture: 2002 Stroke speed, feed step 1: 4 - 20 m/min Stroke speed, feed step 2: 0.3 - 3 m/min Lhodpfx Adekvnc Sjleg Chuck rotation speed step 1: 300 rpm and 320 Nm Chuck rotation speed step 2: 100 rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Max. bore depth: 11,500 mm Spindle power: 55 kW Rotational speed: 300 rpm Dimensions (approx.): Length: 25,000 mm Width: 2,000 mm Height: 2,000 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, sourced from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Consequently, it does not constitute any representation or contractual terms. We recommend verifying all key details.

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Lodpfxowpku Dj Adlshg Dimensions (approximate) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Lhjdperx Rxtefx Adlog Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: dober (rabljeno), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting: up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Overhang: 500 mm Ledpfx Adswpud Aolohg Number of strokes: 3 – 38 m/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The data is supplied in good faith but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or terms of contract. We recommend verifying all critical information.

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Lhsdpsvdal Aofx Adleg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 2014, Manufacturer: MIBA Ledpfx Adewq Hqkslohg Type: LNF65 Control: SIEMENS 840D Year of manufacture: 2014 Specifications Metric US Standard There are (currently) no specifications available for this machine. Dimensions (Approximate) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all critical details.