Holzkraft Sesalnik, Ni Odporen Na Prah nakup rabljenega (31.157)

Stanje: rabljeno, Leto izdelave: 2021, Year of manufacture: 2021 Dimensions and Weights Length (product): approx. 1,700 mm Width/Depth (product): approx. 600 mm Height (product): approx. 2,400 mm Net weight: approx. 69 kg Chip collection volume: 2 x 215 l Nominal diameter outside extraction connection (inlet): 260 mm Nominal diameter outside extraction connection (outlet): 2 x 100 mm, 2 x 120 mm Electrical Data No-load speed: 2,950 rpm Connection voltage: 400 V Mains frequency: 50 Hz Input power: 3.8 kW Output power: 3 kW Filter Filter surface area: 2 x 2.4 m² Noise Emission Maximum sound pressure level: 89.9 dB(A) Lodpfx Ajwb Ekdsdljhg Airflow Nominal air flow: 4,300 m³/h Maximum negative pressure: 2,000 Pa Scope of Delivery Fine filter bag, two chip collection bags Availability: short-term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Ciklon za prah, separator prahu, odsesovalec prahu, industrijski sesalec, Rabljeni stroj Lhedpfx Aoxh Ammedlog Proizvajalec: Piovan Tip: — Skupne dimenzije: Širina: 820 mm Globina: 600 mm Višina: 2300 mm Podatki o vakuumski črpalki: Proizvajalec: Siemens Tip: ELMO-G 2BH1 Moč: 4 kW Prostornina posode za prah: Ø 470 x 340 mm

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), For sale: 2 coal dust silos Capacity: 120 m³ each Silo material: S235 steel Discharge cone material: Stainless steel, from Ø 250 mm to Ø 1450 mm Diameter: 3.40 meters Silo height: 20.6 meters Total height: 24 meters Weight: 22 tons Explosion vent: DN 1300 Implosion flaps: 2x DN 500 Silo filter: Ø900 mm Infra Jet AJP 304 (30 m²) Filling line: DN100 Discharge cone: 70° Air loosening with 6 nozzles Ljdpfx Adeh Dix Ijlohg Level measurement: Endress+Hauser Soliphant Discharge dosing: dense phase conveying Manufacturer: Altmayer Airdos PDF 800 Rotary valve DN 250, Manufacturer: Kreisel Dismantling has already been completed; silos are in storage and immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Debus DDS 118 / 5/ 23 Chip Industrial Vacuum Cleaner 6 bar 4.6 m³/min 278 Manufacturer: Debus Model: DDS 118 Full designation: DDS 118 / 5/ 23 Chip Year of manufacture: 2016 Serial no.: 278 Operating pressure: 6 bar Suction capacity: 4.6 m³/min Air consumption: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm (L) x 60 cm (W) x 150 cm (H) Condition: used Scope of delivery: as shown in images Complete factory closure, large selection of storage platforms, pallet racking, shelving racks, vertical carousels. Lsdpfx Aeivd A Uedlehg High-quality industrial machinery, lathes, grinding machines, hand tools Additional items – new and used – can be found in our shop! International shipping costs on request!

Stanje: novo, Leto izdelave: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edging: 0.4 - 3 mm Solid wood edging: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: granulate / quick-change glue pot kit End trimming unit: yes Flush end trimming unit: yes Corner copying unit: yes Flush radius milling unit: yes Radius scraper unit: yes Flat scraper unit: yes Lhjdpfxsl D Rx Uo Adlog Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3774 mm Machine width: 1546 mm Machine height: 1337 mm Weight: 842 kg

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Multiple combination machine minimax cu 410es F 26 TERSA * Ø 350 mm main saw blade with 118 mm max. cutting height, which can also be achieved when a scoring blade is installed * Saw unit with permanently precise double trunnion guidance * Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside * High-precision sliding table made of anodized aluminum on hardened and crimped steel guide rails * Smooth-running, high-precision sliding table made of anodized aluminum with proven and permanently smooth ball contact system on hardened and crimped steel guide rails * Large crosscut frame (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm * Saw unit tiltable from 90° to -45° * Tilting spindle moulder from 90° to -45° towards the rear into the fence * Four spindle speeds * Forward and reverse spindle rotation * Quick change to thickness planer thanks to parallel-opening jointer tables * 2-speed feed system in thicknessing table * Helical-toothed steel feed roller for uniform wood feed * Three independent industrial motors * With separate saw parallel fence and separate jointer fence * Main switch lockable * Motor equipped with protection switch * Weight approx. 1300 kg * Jointer Jointer table width: 410 mm Ledpfx Aoyz Sdwjdlehg Jointer table length: 2200 mm Max. cutting depth: 5 mm * Extraction connection Saw blade guard extraction port diameter: 60 mm Number of extraction ports: 3 Extraction port diameter: 120 mm * Thickness planer Table length: 775 mm Table width: 410 mm Working height min.: 3 mm Working height max.: 240 mm Max. cutting depth: 5 mm * Electrical data Number of motors: 3 Main drive motor power: 5 kW Scoring motor power: 0.55 kW Connection voltage: 400 V Mains frequency: 50 Hz * Spindle moulder Tilting range: 0 – 45° Spindle diameter: 30 mm Usable length: 125 mm Speeds: 3500/6000/8000/10000 rpm * Max. cutter diameter retractable: 240 mm for tenoning: 320 mm * Planer cutterblock Type: TERSA Diameter: 95 mm Number of knives: 4 Speed: 5000 rpm * Circular saw unit Crosscut length: 2600 mm Cutting width with parallel fence: 1000 mm Max. cross cut width left of blade: 3300 mm Saw blade tilting: 90–45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Max. saw blade projection at 90°: 118 mm Max. saw blade projection at 45°: 84 mm (Main) saw blade diameter: 350 mm Explanation: Main saw blade diameter with scoring blade (Main) saw blade speed: 4200 rpm * Sliding table and work table Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm * Feed system Speed range: 6 – 12 m/min Transport available at extra cost

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy Lhjdpfex Hbrusx Adleg - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5 h, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.500 obr/min, širina mize: 530 mm, dolžina mize: 1.200 mm, skupna masa: 510 kg, premer orodja: 240 mm, Oprema: CE označba, Professionelle macchina per artigiani con mandrino fresa orientabile e braccio esteso. Macchina da esposizione come nuova – utilizzata solo per dimostrazioni Unità di fresatura in ghisa, inclinabile all'indietro fino a -45° Quattro velocità di fresatura da 3500 a 10000 giri/min Lhedsyn Ny Uopfx Adlog Rotazione destra/sinistra Indicatore di altezza e inclinazione con precisione di 1/10 mm Cambio rapido della velocità tramite serraggio eccentrico Potente motore industriale da 5,0 kW Cuffia di protezione per fresatura curva inclusa nella fornitura Prodotto in Italia Inclinazione mandrino fresa 0 – -45° Lunghezza utile del mandrino 125 mm Velocità mandrino 3500/6000/8000/10000 giri/min (display LED sulla parte frontale della macchina) Diametro mandrino 30 mm Diametro utensile max. 240 mm Diametro utensile massimo abbassabile 230 mm Diametro utensile massimo per tenonatura 320 mm Accessori inclusi: Guida per tagli obliqui con due battute ribaltabili Serraggio eccentrico Cuffia di protezione per fresatura curva Inoltre: ganasce del sistema di battuta regolabili La macchina può essere visionata e testata in qualsiasi momento presso la sede di Chemnitz.

Stanje: novo, Leto izdelave: 2025, Gluing unit: Yes Edge thickness: up to 3 mm Lhjdpfxjk Eai Uj Adleg Workpiece thickness: from 8 mm to 50 mm Minimum workpiece width: 110 mm Glue pot: Granulate, quick-change pot End trimming unit: Yes End trimming / flush cutting: Yes Milling station: Chamfer / Radius Corner copying: Yes Flat scraper: Yes Radius scraper: Yes Buffing unit: Yes Anti-adhesive spray unit: Yes Infeed fence adjustment: Manual Workpiece thickness adjustment: Manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Stanje: novo, Leto izdelave: 2025, Delovna širina: 420 mm Lhsdpoxrbg Hsfx Adleg Skobeljni valj: Tersa Število nožev: 4 Dolžina izravnalne mize: 2000 mm Nastavitev votlih/šiljenih spojev: ne Kot izravnalnega vodila nastavljiv: da Dvigovanje izravnalnih miz: ročno Maksimalna prehodna višina debelinke: 240 mm Električna nastavitev višine debelinske mize Prikaz debeline skobeljenja: digitalno Podajalna hitrost: 6/12 m/min Uvodni valj: jeklo Izhodni valj: jeklo Pritiskalni nosilec: neprekinjen Namizni valji: ne Moč motorja: 5 kW Zavorni motor: da, avtomatsko Priključek za odsesavanje: 160 mm Dolžina stroja: 2300 mm Širina stroja: 1100 mm Teža: 450

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Dolžina sani: 2300 mm Širina reza na vzdolžnem prislonu: 900 mm Širina reza na prečnem prislonu: 2310 mm Globina reza: 100 mm Predrezovalnik: ne Nagib žaginega lista: +45° Višinsko nastavljanje žaginega lista: ročni obroč Nastavljanje nagiba žaginega lista: ročni obroč Nastavljanje vzdolžnega prislona: ročno Prikaz kota žaginega lista: skala Prikaz višine reza: - Lhsdpfexrbh Dsx Adlog Prikaz vzdolžnega prislona: skala Prikaz prečnega merila: skala Nastavljanje predrezovalnika: ročno Premer žaginega lista: 310 mm Št. vrtljajev: 3500 min⁻¹ Moč motorja: 5 kW Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 3500 mm Širina stroja: 2200 mm Teža: 380 kg

Stanje: novo, Leto izdelave: 2025, Working width: 520 mm Ljdsxrbgyjpfx Adlehg Cutterhead: Tersa Number of knives: 4 Surface table length: 2250 mm Surface fence, angle adjustable: yes Lifting of surface tables: manual Maximum thicknessing height: 250 mm Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 695 kg

Stanje: novo, Leto izdelave: 2025, Working width: 410 mm Cutterhead: Tersa knives Number of knives: 4 Jointer table length: 2000 mm Fence, angle adjustable: yes, 45° to 90° Maximum planing height: 230 mm Thickness table height adjustment: Handwheel Planing thickness display: mechanical counter Feed speed: 6 / 12 m/min Lhjdohpl Spspfx Adlog Infeed roller: Steel Outfeed roller: Steel Pressure bar: Yes Table rollers: No Motor power: 5 kW Motor brake: Yes, automatic Extraction port: 120 mm Machine length: 2000 mm Machine width: 750 mm Weight: 430 kg

Stanje: novo, Leto izdelave: 2025, Delovna širina: 520 mm Oblični valj: spiralni valj Število nožev: 4 Dolžina obl. mize: 2250 mm Kot nastavljivega ograje obl. mize: da Dvigovanje obl. mize: ročno Največja debelina prehoda debelinke: 250 mm Višinsko nastavljanje debelinske mize: električno Prikaz debeline struženja: digitalen Hitrost podajanja: 5/8/12/18 m/min Podajalni valj: jeklo Izvlečni valj: guma Tlačni nosilec: skoznji Mizni valji: ne Lodpoxrbhdjfx Adlohg Moč motorja: 7 kW Zavora motorja: da, samodejna Priklop za odsesavanje: 160 mm Dolžina stroja: 2300 mm Širina stroja: 1100 mm Teža: 695 kg

Stanje: novo, Leto izdelave: 2025, Lepljenje enote: Da Debelina robnega traku: največ 3 mm Debelina obdelovanca: 8 mm - 50 mm Širina obdelovanca: min. 110 mm Lepilni kotliček: granulat, hitro izmenljiv kotliček Lsdpfxexrbibe Adlehg Obrezovalne škarje: da Obrezovanje/poravnava: da Rezkalna postaja: posnetje/ polmer Ravna postružna rezila: Da Polmerna postružna rezila: Da Ročna nastavitev uvajalnega ravnila Ročna nastavitev debeline obdelovanca Priključna moč: 5 kW Dolžina stroja: 3314 mm Širina stroja: 1085 mm Teža: 623 kg

Stanje: novo, - NEW - Description Cutting plane directly at the saw blade Heavy-duty steel cast iron construction Precision-guided sliding table made of aluminum, anodized as standard Large support table on telescopic arm, longitudinally adjustable Extendable aluminum telescopic fence, angle-adjustable with professional fence stoppers Parallel fence with quick-lock and fine adjustment Large, milled cast iron working table remains permanently flat Standard table extension and table enlargement enable easy processing of larger workpieces Smooth running and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made from cast iron is double-mounted on the cast table, ensuring stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with scoring unit installed Equipment features: Double trunnion saw unit Large, made of steel/cast iron Close to the saw blade, mounted on both sides for precision, smooth running, and long service life Height and tilt (up to 45°) adjustable via hand crank Maximum cutting height is achieved even with scoring unit installed Also available with scoring unit Telescopic fence Extendable telescopic fence up to max. 2550 mm Angle-adjustable With professional fence stoppers Aluminum sliding table Equipped with the proven ball contact system Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft warranty on wear of the guide rails Parallel fence with round bar guide With fine adjustment and quick lock Stable round bar guide made of precision-ground steel, 45 mm diameter Foldable as standard for cutting large workpieces Technical Data: Dimensions and Weights Net weight approx. 380 kg Extraction connection Suction port diameter 120 mm Saw blade guard suction port diameter 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical Data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated duty cycle S6 Current type AC Duty cycle 40 % Mains frequency 50 Hz Sliding table and table Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Ljdpfxsvyuqfo Adlehg Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscutting width to the left of blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilt 90 - 45° Saw blade speed 4000 rpm Item No. 5504323

Stanje: novo, Ideal for demanding craftsmen and carpenters - The extra-long, one-piece planer tables allow for easy jointing of workpieces - Work tables are made from grey cast iron, making them resistant and permanently flat - Jointing tables open simultaneously towards the rear with tension spring support, enabling quick and convenient changeover - Fixed-mounted extraction hood means there’s no need to reconnect the extraction hose when switching operations – this saves valuable working time - Helically serrated steel infeed roller ensures consistent and even material feed - Rubber outfeed roller at the planing thickness exit provides uniform material extraction - Material feed with four selectable speeds - Thicknessing table adjustment via handwheel with integrated planing height display - DIGITAL version: electric thicknessing table adjustment with digital readout - Start/stop switch positioned conveniently for the operator - Powerful industrial motor - The machine’s high weight ensures maximum precision and smooth operation - Prepared for mortising device installation - Quality made in Italy TECHNICAL DATA Dimensions and Weights - Length (Product): approx. 2250 mm - Width/Depth (Product): approx. 1370 mm - Weight (Net): approx. 695 kg Jointer - Total table length: 2250 mm - Max. planing depth jointer: 5 mm - Jointer fence length: 1200 mm - Jointer fence height: 150 mm Dust Extraction - Extraction port diameter thicknesser: 1 x 120 mm Installation Information - Required space length: 2250 mm - Required space width/depth: 1440 mm - Dimensions consider maximum travel paths or usable lengths. Thicknesser - Thicknessing table length: 520 mm - Thicknessing table width: 850 mm - Minimum thicknessing working height: 3 mm - Maximum thicknessing working height: 240 mm - Minimum thicknessing working length: 220 mm - Max. planing depth thicknesser: 5 mm Electrical Data - Drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Planer Cutterhead - Cutterhead type: TERSA - Cutterhead diameter: 120 mm Lhodpfxsvwflbo Adleg - Number of knives: 4 pcs - Cutterhead rotation speed: 5000 rpm - Max. planing width: 520 mm Feed - Feed speed: 5/8/12/18 m/min SCOPE OF DELIVERY - Jointing fence with round bar guide - 4 feed speeds - Tersa cutterhead Manufacturer No. 5503501

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Lhodpfx Adsvwf Ucoleg Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Ledpfx Aevwd U Iedljhg Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: novo, Description Worktable made from heavily ribbed cast iron and base frame from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: Format sliding table made of anodized aluminum for maximum cutting precision. Lhodpsvwfqwofx Adlog Cutting plane located directly at the saw blade. Saw blade tiltable from 90° to 45°. Squaring frame with aluminum crosscut fence and adjustable stop for panels and large workpieces. Spindle moulder guard for profiling operations. Two independent motors for each working unit. TECHNICAL DATA Dimensions and weights Weight (net) approx. 190 kg Dust extraction connection Dust extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Duty cycle of drive motor: S6 Drive motor duty cycle: 40% Drive motor power: 2 x 1.8 kW Sliding table and worktable Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000/7500 rpm Max. spindle tool diameter Max. tool diameter: 160 mm Max. tool diameter (tenoning): 200 mm Panel saw unit Squaring length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilting range: 90 – 45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. blade projection at 90°: 67 mm Max. blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Features Anodized aluminum format sliding table Squaring frame with angle-adjustable crosscut fence, flip stop, and degree scale Saw rip fence Eccentric clamp Table extension Milling fence with wooden fence jaws Manual height adjustment of spindle Manual height adjustment of saw blade Manual tilt adjustment of saw blade

Stanje: novo, – New – Description: TERSA quick-change system for tool-free, rapid planer knife changes Four-knife cutterblock delivering superior planing results Smooth operation due to precision engineering and heavy cast-iron construction Long surfacing tables for accurate jointing Robust surface tables made from ribbed grey cast iron, machined and stress-relieved for high durability and permanent flatness Large, stable aluminium surface fence with round-bar guide (1200 x 150 mm), easily adjustable and tiltable up to 45° Auxiliary fence included as standard Powerful 5.0 kW industrial motor Stable steel and cast-iron construction Slot mortising attachment available as an option Lhjdpfxovwf Hrs Adlog Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Net weight: approx. 465 kg

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Lodpfx Adevwga Hjlehg Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made of heavily ribbed cast iron and frame made of welded steel ensure torsional stiffness and vibration-free operation - Unique in this performance class: smooth-running anodized aluminum sliding table with ball contact system - Saw blade tiltable from 90° - 45° - Table extension with angle scale and aluminum crosscut fence for mitre cuts on panels and large workpieces - Planer unit equipped with TERSA quick-change system with three planer knives - Spiral-toothed steel feed roller for consistent workpiece feed during thickness planing - Curved milling guard hood for profiling, standard with fine adjustment - Milling unit with two speeds - Power transmission for the units via three independent motors - Quality Made in Italy Technical Data: Dimensions and Weight Net weight approx. 245 kg Surface Planer Planer table width 300 mm Planer table length 1200 mm Saw/Planer fence tilt angle 90/45° Max. surface planing depth 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter for saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Remarks on space requirement: Dimensions reflect maximum travel range or working length. Thickness Planer Thickness table length 450 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 200 mm Max. thicknessing depth of cut 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated duty cycle drive motor S6 Duty cycle drive motor 40 % Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Spindle Moulder Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle height 75 mm Spindle speeds 5000 – 7500 rpm Max. Cutter Diameter Max. cutter diameter 160 mm Max. lowerable cutter diameter 180 mm Max. tenoning cutter diameter 275 mm Planer Knife Shaft Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with rip fence 540 mm Max. crosscut width left of blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Lsdsvwf Enjpfx Adlehg Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer knife shaft - Anodized aluminum sliding table - Multifunction fence for rip and surface planing - Table extension with crosscut fence and fence jaw - Eccentric clamping arm Item No.: 5500030

Stanje: novo, - New - Description: - Premium features for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Features include graphical display of all machining units and their operating status, graphic simulation of machining processes, control of all machining units, glue pot temperature regulation, setup assistance as per the processing program, error diagnostics for rapid troubleshooting, machining parameter statistics, USB interface, network connectivity ready, and Industry 4.0 readiness with API REST data transfer protocol. - Outstanding accessibility to all working units thanks to the large hood, providing protection and noise reduction. - Monoblock steel construction ensures maximum machine stability and rigidity. - Automatic unit positioning when changing panel thickness. - Automatic feed of strip edges with edge magazine (me 35 t s): Solid wood strip edges are auto-loaded and synchronized with panel feed. - Panel feed via chain conveyor with rubber glide shoes. - Extendable workpiece support table. - Infeed fence adjustment by spacer plates. Technical Data: Dimensions and Weight Length: approx. 3314 mm Height: approx. 1300 mm Width/Depth: approx. 1085 mm Weight: approx. 545 kg Flush/Radial Milling Unit Motor power: 2 x 0.35 kW Spindle speed: 12,000 rpm Cutter diameter (carbide-tipped): 55.3 mm Extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot motor power: 0.25 kW Glue pot extraction port diameter: 60 mm Working temperature: 190°C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edges Edge thickness, rolls: 0.4 – 3.0 mm Edge thickness, strips: up to 5.0 mm Lhedpfx Adsvwfmlslsg Pre-Milling Unit Motor power: 3 kW Diamond cutter diameter: 80 mm Material removal: 0.5 / 2 mm Spindle speed: 7200 rpm Cutter height: 56 mm Extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Motor power: 2 x 0.14 kW Speed: 2800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item No. 5507235

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Ledpfsih Dxdsx Adljhg Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -