Cnc-4 Valjna Stroj Za Obrobljanje Pločevine nakup rabljenega (114.354)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, Zelo dobro ohranjena 4-valjna CNC valjčna preša LUNA Model: 8344 17/06 Pogon štirih valjev CNC krmilje Mylock 100 Krmilni sistem nadzira 4 funkcije: Podajanje, upogibanje, pritrditev in zaklepanje zgornjega valja Največja delovna širina: 1750 mm Največja debelina pločevine: 0,6 mm Leto izdelave: 2003 Teža: 700 kg Izdelano na Švedskem Lhsdpjx Nw N Iefx Adljg

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Lsdoyb Szhspfx Adlehg Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Širina pločevine: 1600 mm Debelina pločevine: 6 mm Upogib: 4 mm Premer zgornjega valja: 140 mm Premer spodnjega valja: 140 mm Premer stranskega valja: 120 mm Minimalni premer upogiba: Ø zgornjega valja x 3 Skupna potrebna moč: 3 kW Teža stroja ca. 2.000 kg Lhodsyv N E Uspfx Adlog Mere stroja: 3700x1300x1280 mm Dodatna oprema: - Naprava za stožčasto upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Jeklena konstrukcija stroja - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Kalibracija

Stanje: novo, Širina pločevine 2100 mm Debelina pločevine 40 mm Upogib 30 mm Premer zgornjega valja 390 mm Premer spodnjega valja 360 mm Ljdpsyv Nt Eefx Adljhg Premer stranskega valja 300 mm Skupna potrebna moč 22 kW Teža stroja pribl. 17.200 kg Dimenzije stroja 5060 x 2200 x 2180 mm

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 13 mm Upogib 10 mm Premer zgornjega valja 300 mm Premer spodnjega valja 270 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Dimenzije stroja 5600 x 1800 x 1500 mm Teža stroja cca. 8.800 kg Dodatna oprema: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Konstrukcija stroja iz jekla - Ločena nadzorna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Nosilna in preklopna ležaja zgornjega valja se upravljata iz kontrolne enote. Lsdpoyv Nh Njfx Adlshg Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konična nastavitev valjev preko nadzorne enote - Osrednji valji so poganjani s hidravličnim motorjem in planetnim reduktorjem (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 10 mm Upogib 8 mm Premer zgornjega valja 270 mm Premer spodnjega valja 250 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Teža stroja pribl. 7750 kg Mere stroja 5600x1450x1600 mm Dodatna oprema/izvedba: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Naslonsko in podpornik zgornjega valja upravljata s krmilne konzole. Pri odprtju naslona se valj samodejno dvigne navzgor. - Konična nastavitev valjev preko upravljalne konzole - Osrednji valji s pogonom preko hidravličnega motorja in obhodnega reduktorja (zgornji in spodnji valj) Lhodpfxoyv Nhcs Adleg - Kalibracija

Stanje: novo, Širina pločevine 2100 mm Lhodpjyv Nf Usfx Adljg Debelina pločevine 6 mm Upogibanje 4 mm Premer zgornjega valja 160 mm Premer spodnjega valja 140 mm Premer stranskega valja 120 mm Skupna potrebna moč 2,2 kW Dimenzije stroja 4140x1040x1140 mm Teža stroja pribl. 2.350 kg Dodatna oprema: - naprava za stožčasto krivljenje - indukcijsko kaljeni valji - digitalni prikaz za stranske valje - stroj iz jeklene konstrukcije - ločena kontrolna konzola - dve hitrosti - vsi valji na krogličnih ležajih - preklopni in podporni ležaji zgornjega valja se upravljajo s kontrolne konzole. Pri odprtem preklopnem ležaju valj samodejno dvigne. - stožčasto nastavljanje valjev preko kontrolne konzole - centralni valji gnani s hidravličnim motorjem in obhodnim reduktorjem (pogon zgornjega in spodnjega valja) - kalibracija

Stanje: novo, Širina pločevine 2100 mm Debelina pločevine 13 mm Upogibanje 10 mm Premer zgornjega valja 230 mm Premer spodnjega valja 210 mm Premer stranskega valja 190 mm Lhodpfsyv I Ubox Adleg Skupna potrebna moč 7,5 kW Teža stroja cca 4.750 kg Prostorske zahteve cca 4150x1400x1300 mm Dodatna oprema/konfiguracija: - Naprava za stožčasto krivljenje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Ležaj za odpiranje in podporo zgornjega valja se upravlja iz upravljalne enote Ko se ležaj odpre, se valj samodejno dvigne. - Stožčasta nastavitev valjev preko upravljalne enote - Centralni valji so gnani s hidravličnim motorjem in planetarnim reduktorjem (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 16 mm Lhedpoyv I Smsfx Adleg Upogib 13 mm Premer zgornjega valja 330 mm Premer spodnjega valja 300 mm Premer stranskega valja 240 mm Skupna priključna moč 11 kW Dimenzije stroja 5600x1650x1900 mm Teža stroja pribl. 10.600 kg Dodatki/oprema: - Naprava za konusno upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena komandna plošča - Dve hitrosti - Vsi valji na krogličnih ležajih - Nosilno in preklopno ležišče zgornjega valja se upravlja s komandne plošče. Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konusna nastavitev valjev preko komandne plošče - Centralni valji so poganjani s hidravličnim motorjem in reduktorjem. (zgornji in spodnji valj) - Kalibracija

Stanje: rabljeno, Servo press brake SAFAN type SMK-P 50-2550 TS1 Press brake machine with 4-axis CNC control Serial no.: MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Max. tool installation height: 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volts, 50 Hz, 9 kW - 4-axis CNC control SAFAN, software version 5.07 TS1; Y1 and Y2 axes for the press beam - 2-axis backgauge: X-axis for depth adjustment, R-axis for height adjustment - 2 stop fingers, manually adjustable laterally (Z1, Z2) - Press beam drive via 2 servo motors and belt drive - Infinitely adjustable working speed Ledpfjxpqy Dsx Adlehg - Operation via electric foot switch and/or 2-hand control panel - 13 clamping holders for upper tool UKB system, type 50.571 (UKB system A) - Tool holder for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB system B) - Without press brake tools (new tooling from UKB costs approx. €3,600 net) - Displayed total operating hours: 8,120 h - Total strokes: 1,049,789 cycles Required space (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Stanje: zelo dobro (rabljeno), Beading Machine / Sheet Metal Edge Forming Machine by renowned German manufacturer Weberwerke Siegen. The machine is designed for edging, hemming, and beading (creating ribs) on sheet metal edges. Its robust and heavy cast iron construction ensures stable and precise operation. The open C-frame allows for processing large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for forming sheet metal. The pressure and roller guidance are mechanically adjustable. Nameplate data: • Model: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² This machine is not a shear – it does not cut sheet metal; it is exclusively for shaping it. Used condition, complete, with visible signs of use consistent with its age. Lhsdpfx Adjyga T Neleg Ideal for locksmith shops, tool rooms, maintenance departments, as well as restoration work and one-off or small-batch production.

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Ledpfx Adjypbqueljhg Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control Lhjdpfx Adsypbqnjleg IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Lhsdsypbqhepfx Adljg Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Lhodpfx Aeypbqbsdlsg Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Ljdpfx Aeypbp Rodlshg Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Lhsdpsypbp Dofx Adlsg Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 810 h, številka stroja/vozila: 22-2261, skupna masa: 97.500 kg, sila podajanja os X: 2.750 N, podajalna sila osi Z: 3.500 N, vhodna napetost: 380 V, Informacije bodo še sledile. Ledpjy A Sccjfx Adljhg

Stanje: dober (rabljeno), Leto izdelave: 2003, Ref. št.: 10454 Proizvajalec: DOOSAN Tip: DAEWOO PUMA 300 MSC Leto izdelave: 2003 Vrsta krmiljenja: CNC Krmiljenje: FANUC 18i-TB Lokacija skladiščenja: Halberstadt Država izvora: Južna Koreja Št. stroja: 0MS19XX Hitrost vrtenja: 4500 min⁻¹ Premer palice: 62 mm Dolžina struženja: 595 mm Mesta revolverja: 12 kos Dodatne informacije: - 4 osi (X/Z/C/B) - Proti-vreteno - Pogonjena orodna postaja - Sistem za odvzem končnih delov - Transportni trak - Transporter ostružkov - Hladilna naprava Powercool - Podajalec palic LNS Quickload Servo 3 - Nosilec za orodje - Nosilec za kleme - Vpenjalne klešče Lhodpeym Nbvofx Adleg Stroj si je po dogovoru možno ogledati pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Sheet width: 2600 mm Sheet thickness: 10.0 mm ST Pre-bending: 8.0 mm ST Top roller diameter: approx. 220 mm Side roller diameter: approx. 170 mm Lower roller diameter: approx. 190 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: approx. 5000 kg Dimensions (machine only): approx. 3500 x 1550 x 1400 mm Very good condition (!!) Current list price incl. accessories: approx. EUR 120,000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll concept offers highly versatile bending and rolling capabilities - Swiveling control unit * Operation – control of all rollers and machine axes * Digital position display for the side rollers * Manual operation via joysticks - Two central rollers are powered directly by hydraulic motors - Conical rolling possible by tilting the rollers - Side roll parallelism ensured by torsion shafts - Double-sided pre-bending - Diameters up to 1.1 times the top roller diameter possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Continuous lubrication of all bearings - Solid welded steel construction - Electro-hydraulic drop end for easy removal of pipes - Manometer/pressure gauge for the rollers - Safety device (safety rope with switch unit) - Operating manual * Special accessories included: * - ROCCI height-adjustable center support * for large tube diameters Ljdpfeylpz Hsx Adljhg - ROCCI electro-motorized feed table * Motorized sheet feed and material support table

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Ledpfx Adjxabkbeljhg Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, številka stroja/vozila: 25498, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 260 mm, delovna širina: 2.070 mm, najv. debelina pločevine: 25 mm, TEHNIČNE PODROBNOSTI Širina pločevine: 2.070 mm Debelina pločevine: 25 mm Upogib: 18 mm Premer zgornjega valja: 320 mm Premer stranskih valjev: 260 mm Premer spodnjega valja: 320 mm PODROBNOSTI O STROJU Skupna potreba po moči: 26 kW Dimenzije in teža Prostorske zahteve: cca 4.700 x 2.000 x 2.200 mm Teža stroja: cca 8.100 kg OPREMA hidravlično pomikanje stranskih valjev naprava za konično upogibanje 2 gnana valja utrdjeni valji hidravlični preklopni ležaj premična upravljalna konzola nožno stikalo varnostna naprava CE znak Lsdpfx Adeygw Ikjlehg

Stanje: novo, Sheet width: 1570 mm Sheet thickness: 10 mm Pre-bending: 8 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Space requirements: approx. 3.5 x 1.5 x 1.55 m – 4 rolls – Capacity: 1570 x 10 mm – Pre-bending: 8 mm – Hardened rolls – Top roll diameter: 220 mm – Bottom roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic operation – Digital display for left roll movement – Digital display for central lower roll movement Lhodpfx Asvkixxjdlog – Digital display for right roll movement – Top roll hydraulically swing-out – ST-52 steel construction – Hydraulic drop-end for easy roll positioning – Hydraulic up and down movement system with central and side rolls – Hydraulic balancing system – Overvoltage protection – Documentation – 400V

Stanje: novo, Sheet width: 3100 mm Sheet thickness: 13.0 mm Pre-bending capacity: 10.0 mm Top roll diameter: 300 mm Side roll diameter: 210 mm Bottom roll diameter: 270 mm Total power requirement: 11.0 kW Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit/display with touchscreen functionality Lhsdpfx Adoxabfleleg * Digital position indicator for both side rolls - Mobile operating console - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety feature (safety cord with switch unit) - Manometer/pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Stanje: novo, Sheet width 1600 mm Sheet thickness 15.0 mm (steel) Pre-bending 13.0 mm (steel) Top roll diameter 230 mm Side roll diameter 210 mm Lower roll diameter 190 mm Total power requirement 7.5 kW Machine weight approx. 4225 kg Space required approx. 4000 x 1300 x 1440 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom rolls) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes Lhodpexabkhefx Adlog - Control unit/display with touchscreen function * Digital position indicator for both side rolls - Mobile control console - 2x selectable bending speeds - Hydraulic folding bearing - Safety device (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark + Declaration of conformity - Operating manual Illustration shows identical model series