Scheugenpflug Vds P6030 Mit A310 Und Vakuumpumpe nakup rabljenega (14.257)

Stanje: zelo dobro (rabljeno), Hydraulic cylinder, support cylinder - Piston diameter: approx. 130 mm - Piston rod: 100 mm - Stroke: approx. 700 mm - with support rollers - each cylinder equipped with hand pump Djdpfob A Hvlex Ab Hokn - Quantity: 3 cylinders available - Price: per piece

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stair Stringer Milling Device SCHEER TW 4 + Router HM 16 Everything is in visually and technically excellent, as-new condition, the machine has been used very little. Everything works perfectly. You can start working with it immediately. All machines are intended for professional/commercial use, not hardware store junk. Stair Stringer Milling Device SCHEER TW 4 With this device, you can mill steps and risers very precisely and accurately. The hand crank even allows you to process curved end faces; you can also use it for milling cutouts in other panel materials, for example, kitchen worktops. Equipped with hardened guide shafts, on which the cross slide with the router is mounted. With ball bearing guide bushings, allowing the device to be moved very easily, accurately, and safely. The machine can be securely clamped to the stringer or similar workpieces with 4 screw clamps. The cross slide features two stops each for both longitudinal and transverse directions. Comes with two positioning angles. Includes user manual, tools, and all accessories. The milling travel in the longitudinal direction is 750 mm; in the transverse direction, the milling travel has been increased from 75 mm to 320 mm, which has significantly expanded the possible uses of the machine. To increase the milling travel, a new base frame made of aluminum profiles had to be built. The modification work was carried out by a reputable mechanical engineering company. Everything works perfectly; this machine is truly unique. Router SCHEER HM 16 Dsdpfoyxr T Tsx Ab Hjkn Very good condition, with only minor signs of use. Extremely robust due to the triple-supported milling spindle. Precise concentricity and flawless milling finish. Accurate column guide and torsion-resistant milling table. Constant speed even under heavy load. With high-performance motor (virtually no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. This machine is suitable for the heaviest continuous milling operations. Good visibility of the milling shaft; chips are blown away by a strong fan. 220V, 1800W Speed: 18,000 rpm Works flawlessly. With M16 IG tool holder.

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Dkedszbikyopfx Ab Hon Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly. Dksdozbighspfx Ab Hsn

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 16 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touch display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers Dsdpfjv Hg Eusx Ab Hjkn - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in empty oven - Documentation, CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated, but only covered with stainless steel sheet. This allows unrestricted entry for all track gauges. Alternatively, the floor can be offered insulated (with entry rails to be specified by the customer). We offer new and used industrial furnaces, which we can also modify and customize to customer requirements. Oven, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, aging oven.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Generalno obnovljeno, na zalogi, 12-mesečna garancija, brez peči za topila! -maks. temperatura 250 °C -skupni parni prostor 20,5 m³ -uporabne mere (D x Š x V) 2300 x 2750 x 2200 mm -krmiljenje Jumo Imago 500 -grelna moč 36 KW -maks. obremenitev pečnega vozička 6000 kg, električni pogon -električne dovodne in odvodne lopute Belimo -odvodni ventilator krmiljen preko frekvenčnega pretvornika -postavitvena mera (D x Š x V) 3000 x 3000 x 3125 mm + tirnica pred pečjo -lastna teža ca. 3500 kg -prosto stoječa elektro omara dokumentacija električno preverjeno in s trenutnim DGUV merilnim protokolom Ogled v naši skladiščni hali po dogovoru. Vozičkasta peč, peč, industrijska peč, krožna peč, komorna krožna peč, žarilna peč, toplotna peč, sušilna peč, temperirna peč, komorna peč, sušilna omara, kalilna peč, Dkodpettbf Ujfx Ab Hjn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 1.000 mm, širina brušenja: 500 mm, Stroji so takoj pripravljeni za delo. Microstatic ima magnet 1000x650 mm, Delta ima magnet 1000x500 mm. Dsdpjx Ara Ssfx Ab Hjkn

Stanje: rabljeno, Vpenjala in držala za stružnice (VDI 30/40/50) od PLN 5/kos na zahtevo Dksdjy H Ezgjpfx Ab Hen

Leto izdelave: 2014, stanje: dober (rabljeno), Nosilnost: 2000 kg Širina: 3850 mm Višina: 400 mm Globina: 130 mm Dsdpfx Aoy Uurweb Hjkn Teža: 5,9 kg Stanje: dobro, rabljeno

Stanje: dober (rabljeno), Različni hitromenjalni nosilci, skupno 42 kosov: 7 kosov WDL 4/50, 16 kosov WDR 4/40, 10 kosov WDL 4/40, 3 kosov WB 4/60⌀, 3 kosov WBW 4/60⌀, 1 kos WBW 23/60⌀, 2 kosa brez tipa. Prosimo, sporočite nam, za katere artikle ste zainteresirani zaradi priprave ponudbe. Djdpfey N S Ifex Ab Hekn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: Dkodoh R Taqopfx Ab Hen - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles Dsdomhhy Nepfx Ab Hjkn - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, HOLTEC podajalnik hlodovine LINCK podajalnik EV40 LINCK V40 LINCK obračalna naprava DV55 LINCK podajalnik EV40 LINCK V40 LINCK dvojna profilna enota VPP34 LINCK krožna žaga VS66 Dsdey Ivugepfx Ab Hokn LINCK ločilec desk SEA LINCK obračalna naprava DV35 LINCK centriranje ZZP LINCK dvojna profilna enota VP34 LINCK krožna žaga MKV LINCK delilni klin SEK

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale With forward/reverse rotation The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately Dodpfxjy Rh Nze Ab Hskn 380 V, 5500 W, with motor circuit breaker for overload protection Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Das Scheugenpflug Dosiersystem K06399 ist eine eigenständige Dosiermaschine. Die Anlage ist speziell für das Dosieren von DOWSIL 744 aus einem 20-kg-Hobbock ausgelegt. Folgende Achsen sind integriert: X-, Y-, Z-Achse, eine um 45° schwenkbare Nadel sowie ein Träger mit rotierbarer Hub-Dreheinheit. Eine Nadelreinigungs- und Messstation ist enthalten. Das Bosch-Förderband für die Träger hat eine Breite von 400 mm (nicht verstellbar). Hinweis: Ursprünglich war die Einheit mit Einlauf- und Auslaufpuffern ausgestattet, diese Teile sind jedoch nicht mehr vorhanden – die Bilder dienen lediglich zur Veranschaulichung. Einlauf- und Auslaufpuffer sind nicht mehr vorhanden – diese sind nur zum Verständnis mit abgebildet. Baujahr siehe Typenschild, in den letzten 2 Jahren außer Betrieb wegen Umstellung der Produktlinie. Dodpfx Aoua Acqjb Hskn

Stanje: dober (rabljeno), Table size: 710x450mm Dedpfxev S Ugdo Ab Hokn Good condition!

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Dodpfx Abswauaxe Hekn

Stanje: rabljeno, Oprema: Ročna stiskalnica za bukove vogale, hod 40 mm, grlo 73 mm Dksdpsx Rh D Sofx Ab Hen

Stanje: dober (rabljeno), Thread cutting machine Hahn und Goebel HG 12E Spindle speed: 180-900 rpm 380V Machine No. 1917/16 Thread range: M4-M65 Dsdpjd Rkbrsfx Ab Hjkn

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Dedpey Aldajfx Ab Hokn

Stanje: zelo dobro (rabljeno), 1 valjasta miza dolžine 3,0 m x širine 0,77 m s 7 nosilnimi valji, s pnevmatsko verigo za dvig in izravnavo s polžastim zobnikom ter mehanskim zračnim cilindrom, z leseno prehodno valjasto drsno mizo z gumijastim vrtljivim krožnikom za enostavno nalaganje lesa z eno osebo, z dvema preklopnima omejevalnima valjema za deske iz tračne žage, ki so že enostransko obrezane. 1 valjasta miza dolžine 3,5 m x širine 0,77 m z 8 nosilnimi valji, z ali brez prehodne valjaste drsne mize. Dkedot E Nw Topfx Ab Hen Originalne PAUL valjaste mize v različnih širinah in dolžinah, v standardni ali težki izvedbi, primerne za uporabo pred krožnimi žagami za kapiranje, obrezovanje ali ponovno žaganje. Kratke delovne mize omogočajo npr. vstop za prevzem materiala s prečnega transporterja, prehod skozi postavitev miz ali nalaganje težkih tramov ali modelov z viličarjem, na voljo pa so tudi dolge delovne mize v različnih dimenzijah.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Dkodpfeykud Rex Ab Hsn Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Djdpeyktv Sofx Ab Hjkn Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Dedpex Ta Nxjfx Ab Hokn Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Dedpfx Aeyktrtsb Hokn Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control