Naprava Za Flotacijo Z Razbremenjevanjem Tlaka (Daf) nakup rabljenega (101.153)

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Lhedpfsyqr Sxjx Adlsg

Leto izdelave: 2009, stanje: rabljeno, številka stroja/vozila: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 combination consists of a CNC-controlled Kaltenbach KBS 1010 DG bandsaw and a Kaltenbach KDX-S 1015 drilling system. Lodpfxeymy Ims Adljhg This saw-drill system is ideally suited for the efficient sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in steel construction and steel trading. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW drive power and a 5-position automatic tool changer per unit. The Kaltenbach M150 length measuring device (measuring carriage), combined with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for profile steel material handling also features infeed and outfeed cross-transfer conveyors for the lateral movement of profiles. The CNC control, together with the Kaltenbach Profiline III software, allows processing of data in DSTV and DXF formats. The complete line offers an ergonomic working height from the material level to the upper edge of the floor of 640 mm, ensuring excellent operator visibility. Removal and discharge of trim cuts or onward transport of the profile into the outfeed area is handled by a gripper after sawing. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill system combination consists of: - PROFILE STEEL DRILLING UNIT Kaltenbach KDX-S 1015 - MITRE BANDSAW MACHINE Kaltenbach KBS 1010 DG - MACHINE CONTROL Kaltenbach Profiline III - LENGTH MEASURING DEVICE Kaltenbach M 150 - TRANSPORT SYSTEM Kaltenbach T13

Leto izdelave: 2009, stanje: rabljeno, številka stroja/vozila: 0301-230036, Kaltenbach drilling and sawing system—a combined solution for applications in light to heavy steel construction. This Kaltenbach system allows steel profiles to be drilled, center-punched, and cut to length in a single operation. It processes rolled profiles such as I-beams, T-sections, U-channels, angle steel, hollow sections, and flat steel. The drilling unit is equipped with an automatic tool changer on three drilling spindles, each accommodating five tool sizes. Tools are positioned with high precision using ball screw drives and servo motors. The entire system features an integrated length measurement unit. Technical Specifications KDXS 1215 Drilling System: • Working range min. 80 x 65 x 10 mm • Working range max. 1200 x 450 mm • 3 drilling units (vertical Y-axis, horizontal Z- and W-axis), each with 11.0 kW frequency-controlled motors: 33.0 kW total • Automatic tool changer (3x5) • Drive power frequency-controlled 78 kW • Working height 640 mm • Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) • CNC control with Profiline 3 software Kaltenbach HDM 1432 high-performance circular saw—a vertical saw with a swiveling mounting for high cutting capacity in medium and heavy steel sections. Working range at 90° saw cut: 1200 x 450 mm. Mitre adjustment for angled cuts from -45°/90°/+35°. This circular saw system is equipped with a segmented saw blade, diameter 1430 mm. High cutting performance is ensured by a powerful drive system. Lhedpfjrr Sq Njx Adlog • NC-controlled cutting angle adjustment • Feed via ball screw for optimal cutting results and short cycle times

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hygiene sluice | Hand disinfection station with turnstile Device type: Hygiene sluice / station Construction material: Stainless steel Set components: 2 hand disinfection modules + integrated turnstile (rotating gate) Overall dimensions: 1780 × 1250 × 1500 mm A professional hygiene sluice made entirely of high-quality stainless steel, designed for rigorous personnel access control to production zones with high sanitary requirements. The station enforces mandatory disinfection procedures before entering the production area. Key features and operating principle: - Two-stage or dual-station disinfection: Equipped with two disinfection units, allowing simultaneous disinfection of both hands or smooth personnel flow during shift changes. - Controlled access (Turnstile): The integrated mechanical turnstile is electrically locked. The lock is released automatically, and passage is allowed only after the hand disinfection cycle has been properly completed. - Hygienic construction: Manufactured from stainless steel, ensuring resistance to aggressive chemicals, easy cleaning and pressure washing, and full compliance with HACCP and IFS standards. Lhsdpfx Adey T Sl Seljg - Ergonomics: Well-designed dimensions (width 1250 mm, length over 1.7 m) provide a stable structure, comfortable operation, and safe everyday use in plant traffic.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device with 24 months warranty Stainless steel model Advantages: Lhsdpjivdxmsfx Adleg + Excellent price-performance ratio + Simple and fast installation & operation + Entirely stainless steel housing + Can also be combined with a chilled water system + Device automatically opens the required water supply, hot/cold water + Automatically dispenses the correct mixture until desired temperature is reached + Powerful microprocessor-based electronic system + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + Digital display of water temperature and quantity + Temperature is set via thermostatic mixing valve (rotary knob) + Fast spare parts supply within 1-2 business days STANDARD accessories included in price: - 1x drain hose (2 meters length) with hanging hook Technical data: - Dosage volume: 0.1 – 99.9 liters or 1 – 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 – 4 bar (recommended) - Connection: 230 V - 1Ph - 50/60Hz - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Stanje: rabljeno, Okrogla delilna miza, delilna naprava, strojna okrogla miza Premer mize: 360 mm Lodoy Sbwzspfx Adljhg Višina mize: 130 mm Prenosno razmerje: 120 : 1 Vpenjalna površina: 375 x 430 mm Luknjasta mreža vpenjalne površine: 400 x 125 mm, Ø 14 mm - Posredno deljenje z ročnim kolesom na polžnem pogonu, prenosno razmerje: 120:1 - Polžni pogon možno preklopiti za neposredno in posredno deljenje - Zaklepanje z 2 vpenjalnima ročicama v vsakem položaju - Ročica s perforirano ploščo - 1 perforirana plošča s števili lukenj: 22, 24, 29, 36, 37, 49, 57, 63 - 1 perforirana plošča s števili lukenj: 16, 27, 30, 33, 41, 47, 53, 61 - 1 perforirana plošča s števili lukenj: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-reže v mizni plošči - Površina mize rahlo obdelana Skupne dimenzije D x Š x V: 600 x 440 x 130 mm Teža: 81 kg dobro stanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Vrsta stroja: stroj za izdelavo žičnih ograj (verižna mreža) Dvojna spirala Lhodpsvdtaaofx Adlsg Proizvajalec: WAFIOS Model: VDF80 Leto izdelave: 1978 Premer žice: 1,6–3,8 mm Širina mrežnih očes: 20–80 mm Delovna širina: 2000 mm Kapaciteta: 160 m²/h

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, WAFIOS DF5 Obseg žice: 1,5–5,0 mm Širina mreže: 20–100 mm Lhedpfxsv Uw Ddj Adleg Delovna širina: največ 2000 mm Kapaciteta: 170 m²/uro Orodje za širino mreže: 60 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Fezer prijemalo za plošče z električnim verižnim dvigalom PS 5 na tirnicah, nosilnost 250 kg, idealno za zlaganje v ploščne žage. Prevoz možen za doplačilo! Lhsdpfx Aew E Irfodlog Zaradi starosti rabljene naprave je pri prodaji poslovnim strankam izključena garancija.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 2.795 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400873, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, moč črpalke: 2.200 W, najv. debelina jeklene pločevine: 120 mm, Stroj je bil obnovljen leta 2026 in servisiran na vsakih 500 delovnih ur! TEHNIČNI PODATKI Delovno območje X-os: 1.500 mm Delovno območje Y-os: 1.500 mm Rezalna zmogljivost jekla: 120 mm (priporočeno: 60–80 mm) Rezalna zmogljivost aluminija: 120–200 mm Rezalna zmogljivost plastika, kamen itd.: neznano PODROBNOSTI O STROJU Moč črpalke: 22 kW (30 KM) Zadnja obnova črpalke: pred 3 delovnimi urami Lhsdpfsy Nmtvex Adlog Dimenzije stroja (D x Š x V): 2.500 x 1.900 x 1.500 mm OPREMA Rezervni deli Računalnik Sistem za mehčanje vode

Stanje: novo, Leto izdelave: 2021, Teža / kg Nosilec MK / Material: železo Lsdpfey S Dxhex Adlshg 200 x 60 x 150 mm Velikost odprtine: 150 mm Magnetna sila: 10-20 kg Na zalogi: 4

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 81 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: CE označba, Na voljo za prodajo je brusilni stroj z dolgo brusilno trakovo NS LMD2500 2Z, letnik 2022, v stanju kot nov. Stroj ima le 81 delovnih ur. Podrobnosti o stroju Proizvajalec: NS Model: LMD2500 2Z Tip stroja: Brusilni stroj z dolgo brusilno trakovo Leto izdelave: 2022 Delovne ure: 81 Lhedpoy Httqofx Adlsg Stanje: Kot novo Stroj je popolnoma delujoč in na ogled po predhodnem dogovoru. Za dodatna vprašanja ali več informacij nas kontaktirajte preko sporočila.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je avtomatska testna postaja za filtre Lorenz za avtomatsko testiranje filtrirnih medijev, polmask, kanistarskih filtrov in medicinskih obraznih mask. Standardi: EN143/EN149/EN14683/ISO16900-3 in več, modulne komponente: merilnik pretoka/fotometer pred in po preizkušanem izdelku/generator aerosola/enota za sesanje in odsesavanje, aerosoli: parafinsko olje/Emery olje/DOP/DEHS, območje volumenskega pretoka: 8L-300L/min, min. merilno območje filtracijske učinkovitosti: 0,0001%, min. merilno območje dihalnega upora: 5Pa-1000Pa, največja hitrost filtrirnega zraka: 10,2cm/s, največja preizkusna površina: 237,8cm³. Naprava je bila malo uporabljena in ne potrebuje vzdrževanja. Dokumentacija je na voljo. Možen je ogled na lokaciji. Slika je vzorčna. Ledpfoy Tx Slsx Adlehg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kapaciteta cca. 8 big bagov na uro Maks. tehtana teža: 800 kg Min. tehtana teža: 250 kg Naprava je še vedno vgrajena in mora v primeru interesa demontažo opraviti kupec. Stanje in specifikacije so razvidne iz slik. Skupaj sta na voljo 2 postaji. Ljdpfxjy R D A Do Adljhg Po želji lahko za doplačilo prevzamemo demontažo.

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tensión de conexión: 380 V, potencia conectada: 7,5 kVA, consumo energético específico 2 kW/m² Ensayos de intemperismo UV global con espectro global [similar al arco de xenón], pero con lámparas fluorescentes Volumen de la cámara de prueba: 200 litros Lhodpfx Adeytr Swjlsg Superficie de prueba: 0,75 m² Dimensiones de la cámara de prueba (Al x An x Pr): 1100 x 800 x 250 mm Rango de temperatura sin aislamiento: -20°C a +90°C Rango de temperatura con aislamiento: +10°C a +90°C Constancia de temperatura: ±2K Rango de temperatura del punto de rocío: +5°C a +40°C Rango de humedad: aprox. 15 - 95% h.r. Humidificación de muestras con 8 boquillas pulverizadoras El sistema utiliza fuentes de luz UV fluorescente para simular en laboratorio el espectro dañino de la radiación solar, acelerando así los efectos de envejecimiento como cambios de color, pérdida de brillo, formación de grietas, fragilización y degradación del material. Los ciclos programables de exposición UV, control de temperatura y fases opcionales de humedad y condensación reproducen y repiten de forma reproducible las cargas ambientales prácticas. Desmontaje a cargo del comprador.

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,300 Leasing rate: €1,045.17 Bending length: 2,550 mm Sheet thickness (420 N/mm²): 2.5 mm Max. sheet thickness - stainless steel: 1.5 mm Max. sheet thickness - aluminium: 3.5 mm Drive: motorized Length: 3,830 mm Width: 2,200 mm Height: 1,900 mm Weight: 4,050 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swiveling arm - Tabular programming by entering respective axis values Lhedpfx Ajwiq A Uedljg - Open or closed folding function - Multi-radius functions for folding or bending - Programming of material quality, sheet thickness, spring-back, bending corrections and creation of a database for various material types, sheet thicknesses and lengths - Piece counter - Password authorization - 128GB HDD, allowing virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool and parameter page Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in the sheet supports Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. Bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain safety system Triple foot pedal OPTIONS: - Segmented gooseneck rails - Pneumatic tool clamping - Segmented lower and bending tools - Servo drive for the bending beam - Manual crowning system - Second foot pedal - Side stop - Rear light curtain safety system - 2D or 3D graphic control - PC software - Special omega geometry for lower and bending tools - Tapered backgauge - Backgauge extension - Vacuum holders

Leto izdelave: 2014, stanje: rabljeno, Industrial water treatment and distillation unit for the processing of industrial wastewater and process water, featuring integrated control system, collection tanks, and new pump installed following recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of construction: approx. 2014 Operating manual available Control system with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Recent inspection completed Industrial wastewater collection tank included Distillate collection tank included Tank material: PP grey Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solutions Industrial wastewater tank volume: approx. 10,280 litres Distillate tank volume: approx. 10,732 litres VacuCIP tank volume: approx. 1,306 litres Permissible operating temperature of tanks: 40 °C Permissible operating temperature of VacuCIP tank: 80 °C Specific weight of tanks: 10.00 kN/m³ Specific weight of VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Lhsdpfx Aoy S Rr Uodljg Initial concentration: 1:10 Fully enclosed industrial design Piping and tank system constructed from stainless steel and plastic

Stanje: rabljeno, Sheet width 3200 mm Sheet thickness 2.5 mm Lhsdper Ngtfsfx Adleg Machine weight approx. 3.5 t Tools have been newly reground Bending angle preselection via potentiometer

Stanje: rabljeno, Leto izdelave: 2020, Load capacity 500 kg Own weight 930 kg Dimensions 1250 x 2590 x 1500 mm Ledovg R U Tjpfx Adlehg Operating manual available For technical data, please refer to the attached PDF.

Leto izdelave: 2004, stanje: rabljeno, Funkcionalnost: nepreverjeno, Profesionalna mobilna točilna naprava iz gastronomije. Kompaktna enota z integriranim hlajenjem in pomivalnim koritom – idealna za dogodke, pivovarne, degustacije ali začasne bare. Dalj časa ni bila v uporabi, potrebna je pregled in servis. Proizvajalec: HAGOLA Gastronomie-Technik Tip: hkt16 Letnik: 02/2004 Priklop: 230 V / 50 Hz Hladilno sredstvo: R134a Moč agregata: 460 W (do pribl. –10 °C) Oprema • 3 točilne pipe na nerjavni jekleni koloni • Integrirano hlajenje piva (pretokovni hladilnik) • Pomivalno korito z armaturo Lhsdpfxey Srkfe Adlog • Odkapna posoda / površina iz nerjavečega jekla • Podstavek s tehničnim prostorom in kolesi • Cevovodi in deli glede na slike Stanje Naprava je bila do demontaže v obratovanju. Potem skladiščena. Rabljeno stanje z običajnimi sledmi uporabe. Priporočamo preverbo delovanja pred ponovnim zagonom. Uporaba Točilna postaja na dogodkih, pivovarskih slavjih, bar na prostem, catering.

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Na voljo je naprava za čiščenje vode iz brušenja stekla. Kapaciteta/pretok: približno 6 m³/h–12 m³/h. Sestavni deli sistema: visokozmogljiva dozirna črpalka za flokulant, dvojni sedimentacijski stolpi v obliki lijaka, integrirana polnilna postaja za big-bag vreče za odvodnjavanje blata, premični nosilec za prekucne zabojnike. Upravljanje: električni nadzor črpalke z nastavitvijo dozirnega intervala. Teža: približno 1450 kg. Skupne mere D/Š/V: cca 3800 mm/4200 mm/1800 mm. Ogled možen po dogovoru. Lhjdpey Tn H Eofx Adlsg

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), V prodaji je avtomatski stroj za rezanje lepljenega stekla. Delovno območje X/Y: 3700mm/2600mm, debelina stekla: 3+3mm do 10+10mm, način delovanja: avtomatski razrez lepljenega varnostnega stekla (VSG), ločilni sistem: infrardeči grelni meč za PVB folijo, površina mize: filc z zračno blazino, gibanje mostu: sinhronizirano za zgornjo in spodnjo stran, pozicioniranje: samodejno prek CNC osi, upravljanje: CNC krmiljenje. Opremljen s hidravlično dvižno mizo (nagibna miza), premičnim upravljalnim pultom, pnevmatskimi napravami za lomljenje. Teža: cca 5800 kg, skupne mere X/Y/Z: cca 9500mm/4200mm/1600mm. Ogled mogoč po dogovoru. Ledpfx Ajy Tn H Sedlshg

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC radialni vrtalni stroj, ki je bil leta 2018 generalno obnovljen. Delovno območje X/Y: 1050 mm/1800 mm, zmogljivost vrtanja v jeklo: 40 mm, zmogljivost vrtanja v litoželezo: 50 mm, rezanje navojev: M36-M45, vpenjalo za orodje: SK40, območje vrtljajev: 15 obr/min-2800 obr/min, hod pinole Z: 200 mm, hod stebra W: 410 mm, vpenjalna površina mize X/Y: 1800 mm/600 mm, hitrost podajanja: 5 mm/min-2000 mm/min, hitra pomika X/Y: 7,5 m/min, upravljanje: CNC upravljanje. Opremljen z 360° vrtljivo napravo, motoriziranim vpenjanjem orodja, trivilčnimi tokali za okrogle dele, posodobljenim LCD zaslonom, obsežnim paketom orodij. Teža: cca 2900 kg, skupne mere X/Y/Z: cca 2600 mm/1900 mm/2950 mm. Ogled možen po dogovoru. Lhedpfx Aoy Tn Ntsdljg

Stanje: zelo dobro (rabljeno), Used GRP flat-bottom wine tanks with two chambers and approx. 2% slope towards the outlet. Capacity: approx. 81,000 liters Diameter: approx. 3,000 mm Total height: approx. 11,000 mm Weight: approx. 1.8 t Tank with domed top bottom Lhodpfsg T Tgxex Adleg Tank divided into 2 chambers: upper chamber 54,000 liters, lower chamber 27,000 liters Equipment per chamber: - 1 manhole 310 x 440 mm - 1 flanged outlet nozzle DN 65 - 1 flanged vent nozzle DN 50 - 1 flange connection DN 50 for agitator - 1 3/8" fitting for sampling tap Further details as per drawing.

Stanje: rabljeno, Teža / kg Vpenjalna glava MK / Vključeno v dobavo: Lsdpfx Ajy Suqhjdlehg Proizvajalec: Lenzkes 5x nizkoprofilne sponke LH 012 4x nastavki za zvišanje vpenjanja (veliki) 3x nastavki za zvišanje vpenjanja (mali) 2x neustrezni primeži