Cronosstech H Tip 1000 Ton Enodejstveni Hidravlični Tisk nakup rabljenega (76.269)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Ljdpfow Slxzjx Adljhg Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Lhodpfew Sl I Njx Adlsg Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) Ledpfx Adow Smb Rjlehg TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system Lodpew Smfcefx Adlehg * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 8 kW (10,88 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebenega visokotrdnega materiala, termično obdelane in brušene Vodoravni in navpični delovni položaj Kaljeni standardni valjčni elementi Ločena premična upravljalna plošča Mehanski ročni stranski nasloni, premični v 3 smereh Natančno krivljenje z motorjem z zavoro Dva digitalna prikazovalnika Lhodpfx Aow Smi Isdlsg IZBIRNA OPREMA Valjčni elementi za krivljenje cevi in profilov Opcijski dvoosni hidravlični stranski nasloni Avtomatizacija z NC-krmiljenjem TEHNIČNE KARAKTERISTIKE Premer valjev: 100 mm Premer valjčnih elementov: 315 mm Delovna hitrost: 7 m/min Moč motorja: 7,5 kW Dolžina: 2000 mm Širina: 1450 mm Višina: 1700 mm Teža: 3650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT Lhodjxbzr Uepfx Adleg * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping Lhedpfx Aox Nn I Uodlsg • Wide lower table for multi-groove dies • Rear gauge X travel 1000 mm • AKAS or DSP front safety system with laser beam • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 13 obr/min, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting function for parts longer than 1,000 mm • Adjustable cutting length from the control panel to increase the number of cuts in short sheet cutting • Ball transfer sheet support table • Upper blade with 2 cutting edges / Lower blade with 4 cutting edges • Special pivot system reducing maintenance requirements • 1,000 mm front support arms, with ruler, T-slots and stoppers • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control arm and safety enclosures • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front delivery (Type 2) • Adjustable angle square 0-180º • Front support arms at required lengths • Special throat depth 500 mm • Full-length openable front finger guard • Front finger safety light curtain • Special blade • Laser cutting line • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • Rear light barrier complying with CE standards • Light type safety guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Lhedpfx Adex Npddslog Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 spm Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 Tons

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, sila umika: 40 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 100/40 ton four-column hydraulic drawing press is an industrial press solution with a four-column rigid frame, designed for metal forming, deep drawing, and precision pressing applications. Lhedex N Ulyopfx Adlog The St52 grade steel construction frame undergoes stress relief via vibration. This structure ensures long-term preservation of high parallelism and perpendicularity tolerances. Ram and blank holder (pot) systems operate independently; stroke and pressure settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and a PLC-controlled system, it delivers high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts reduce maintenance requirements to a minimum. This model is an ideal solution for medium-scale serial production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (POT/BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (POT): 200 mm MIN. DAYLIGHT OPENING: 100 mm MAX. DAYLIGHT OPENING: 700 mm WELDING STRESS RELIEF: Vibratory WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s POT TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø230 mm – Ck45 POT CYLINDER BORE: Ø145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3500 mm APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (configurable from screen) RAM / POT STROKE & TONNAGE ADJUSTMENT: Configurable from screen SYSTEM & PRESS STATUS DISPLAY: Viewable on screen DIE MEMORY: Configurable from screen LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically Lhjdpfx Aexw Ebledlog * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, višina mize: 965 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, STANDARD FEATURES CNC-controlled hydraulic press brake Y1 – Y2 – X – R axes CNC controlled (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo motorized backgauge Backgauge travel distances: X axis: 750 mm R axis: 250 mm Backgauge system with ball screws and linear guides Sliding type front support arms Manual crowning system (wedge type) European-style narrow bottom table European-style quick upper tool clamping system (Promecam type) High-precision linear scales Standard upper tool (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4-groove V: 16 / 22 / 35 / 50 mm) Laser front safety system LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Backgauge systems with 4 / 6 / 8 axes starting from X + R Extension of backgauge X axis distance to 1000 mm Ledpfx Ajx Nqqrsdljhg Additional backgauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide bottom table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet air conditioning cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (daylight): 515 mm Throat depth: 410 mm Table height: 965 mm Backgauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/s Working speed: 140 mm/s Return speed: 10 mm/s Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Stanje: novo, Leto izdelave: 2024, prebijalna sila: 85 t, moč: 7,5 kW (10,20 KM), COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS DELIVERY DATE: PLEASE INQUIRE DELIVERY TERMS: EXW BURSA/TURKEY STANDARD FEATURES: • 12 independent hydraulic pistons and 2 separate foot pedals allowing simultaneous operation by two people • Adjustable piston stroke for faster work cycle • Centralized lubrication system • Electrically controlled rear stop • Work lamp • 5 separate work stations integrated into the main body: 6.1 - Ø22 mm punch and die set and standard hole punching attachments 6.2 - Shearing blades for solid round and solid square bars 6.3 - Shearing blades for angle iron 6.4 - Shearing blades for flat bar and sheet metal 6.5 - U-notch blade set TECHNICAL SPECIFICATIONS: Tonnage: 85 Tons. Motor Power: 7.5 kW Ledpfx Adjvfyngolehg Dimensions: 1,920 x 950 x 2,040 mm (L x W x H) Weight: 2,315 kg PUNCHING: Punching capacity: Ø33 mm x 20 mm thickness. Throat depth: 355 mm. Punch stroke: 80 mm. Working height: 1,080 mm. SHEARING: Sheet metal: 380 x 20 mm, 480 x 15 mm. Blade length: 482 mm. Round bars: Ø50 mm. Square bars: 50 mm. 90° angle profiles: 150 x 150 x 15 mm. 45° angled profiles: 80 x 8 mm. NOTCHING: Max. thickness: 13 mm. Width: 52 mm. Depth: 100 mm. Working height: 940 mm.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Lhjdpsw Slcgefx Adleg Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Lhjdpfxew Slf Us Adlsg Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 4 kW (5,44 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebnega visoko trdnega, kaljenega in brušenega materiala Vodoravni in navpični delovni položaj Standardni kaljeni valji Ločena premična upravljalna plošča Mehanski ročni bočni omejevalniki v 3 smereh Natančno krivljenje z zavoro na motorju 2 digitalna prikazovalnika Lhjdpsw Smhwofx Adlog OPCIJSKA OPREMA Valji za krivljenje cevi in profilov Dvodimenzionalni hidravlični bočni omejevalniki po izbiri Avtomatizacija z NC krmilnikom TEHNIČNE SPECIFIKACIJE Premer zgornje osi: 60 mm Premer spodnje osi: 50 mm Premer valja: 180 mm Delovna hitrost: 6 m/min Moč motorja: 3,75 kW Dolžina: 1200 mm Širina: 850 mm Višina: 1200 mm Teža: 955 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) Lodpfx Aoxd S T Uodlshg TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications Ledpfx Adoxw Ecvolehg * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19200 kg

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), hod: 310 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 80 mm/s, višina mize: 985 mm, globina grla: 510 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 400 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options, starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove tooling • Backgauge X travel: 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Descent Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Main Motor Power (kW) 30 Lhsdpfxjx Npalj Adlog CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 4.000 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 12 obr/min, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increased speed for short cuts) High precision, stress-relieved steel frame Hardened guideways and roller-equipped upper beam movement system 1,000 mm CNC-controlled, motorized and programmable back gauge Back gauge features: - Programmable retraction - Lifting function for long pieces - ±0.1 mm positioning accuracy Ball screw-driven sheet support front table Upper blade: double-edged / Lower blade: four-edged High alloy steel knives Special articulated system reducing maintenance requirements Front support arms with ruler, T-slot, and stopper (1,000 mm) Cutting line illumination and shadow wire Lhodpfxex Nqphs Adleg Front finger guard (openable type) Front and side safety covers Foot pedal Movable control pendant Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding feature) Adjustable front squaring arm (0–180°) Front support arms in custom lengths Full-length openable front finger guard Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line indicator Oil heater or oil cooler Automatic or manual central lubrication system Climate-controlled cooling system for electrical cabinet CNC-controlled front sheet support and feeder arms Custom throat depth (500 mm) Light-duty guard TECHNICAL DATA (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Back gauge travel distance (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Stanje: novo, Leto izdelave: 2024, prebijalna sila: 55 t, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS DELIVERY DATE: PLEASE INQUIRE DELIVERY TERMS: EXW BURSA/TURKEY STANDARD FEATURES: • 12 independent hydraulic cylinders and 2 separate foot pedals allowing simultaneous operation by two operators • Adjustable cylinder stroke length for faster and more efficient work • Centralized lubrication system Lsdpfjvg D Nkjx Adljhg • Rear stop controlled by electric switch • Working lamp • 5 different work stations on the same frame: 6.1 – Ø22 mm punch and die sets and standard hole punching attachments 6.2 – Solid round and solid square material cutting set 6.3 – Angle cutting blade set 6.4 – Flat bar and sheet cutting blade set 6.5 – U-notching blade set PUNCHING UNIT HKM 55 Max diameter at maximum thickness: Ø 20 x 20 mm Diameter x thickness (xt): Ø 40 x 10 mm Max thickness at maximum diameter: Ø 100 x 3 mm Stroke length: 60 mm Number of strokes: x 25 Throat depth: 255 mm Working height: 1030 mm SOLID MATERIAL SHEAR HKM 55 Round / square: Ø 40 - 40 mm ANGLE SHEAR HKM 55 Shearing straight angle (90°): 120 x 120 x 12 mm Shearing angled (45°): 70 x 10 mm Working height: 1130 mm PLATE SHEAR (FLAT BAR SHEAR) HKM 55 Flat sheet: 200 x 20 mm Flat sheet: 300 x 15 mm Blade length: 317 mm Angle cutting: 80 x 15 mm Working height: 900 mm NOTCHING HKM 55 Material thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm SPECIAL DIES HKM 55 U-I profile blades (for cutting UPN - IPN): 120 x 58 mm T profile blades: 80 x 9 mm Special notching set: 100 x 100 x 10 mm V-bending: 250 x 12 mm Maximum flat bar bending: V-bending: 500 x 3 mm Maximum sheet bending: Punching at notching station: 125 mm Throat depth: Punching at notching station: Ø 38 x 8 mm Maximum sheet bending: TECHNICAL SPECIFICATIONS HKM 55 Motor power: 5.5 kW Weight: 1520 kg Machine dimensions (LxWxH): 1500x950x1880 mm Pressure: 55 tons

Stanje: novo, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, najv. debelina pločevine: 8 mm, trajanje garancije: 12 meseci, CNC Controlled Hydraulic Guillotine Shear – 3000 x 8 mm An ideal solution for sheet metal workshops and industrial production lines, combining high cutting accuracy, robust frame structure, and CNC-controlled systems. Provides high-quality, repeatable cutting performance across various sheet thicknesses. Standard Features - ELGO P40T Touchscreen NC Control Unit - Rexroth / Hoerbiger hydraulic system - Automatic CNC-controlled blade gap, stroke, and blade angle adjustment - 1,000 mm NC-controlled, programmable, motorized backgauge - 250 mm throat depth - Programmable backgauge retracting function - Backgauge lifting feature for parts longer than 1,000 mm - Adjustable cutting length from control panel to increase stroke count on short cuts - Ball transfer sheet support table - 2 cutting edges on upper blade / 4 cutting edges on lower blade - Special articulated system to minimize maintenance needs - 1,000 mm front squaring arms with ruler, T-slot, and stops - Front and side safety guards - Cutting line illumination and shadow wire - Front finger guard (1,000 mm opening cover) - Foot pedal - Movable control lever and enclosure cabinets - Emergency stop buttons Optional Features - Rear pneumatic sheet support system (Type 1) Ljdpfx Ajx Rrk Nsdlehg - Rear pneumatic sheet support system, forward return (Type 2) - Angle adjustable square (0–180º) - Front squaring arms in custom lengths - Special throat depth (500 mm) - Full-length front finger guard cover - Front finger light curtain safety - Special blades - Laser cutting line indicator - Oil heater or oil cooler - Automatic or manual central lubrication - Electrical cabinet with air-conditioned cooling - CNC front support sheet transfer arms - CE-compliant rear light barrier - Lightweight enclosure Technical Specifications (3000 x 8 mm) - Cutting length: 3,100 mm - Cutting capacity (450 N/mm²): 8 mm - Cutting capacity (700 N/mm²): 5 mm - Cutting angle: 0.5 – 2.7° - Number of hold-down cylinders: 14 - Cutting speed: 10 / 15 strokes/min - Throat depth: 250 mm - Backgauge travel (X): 1,000 mm - Table length: 3,500 mm - Table width: 900 mm - Main motor power: 15 kW - Oil tank capacity: 275 L - Machine weight: ~7.5 tons Technical specifications may vary according to the requested configuration.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 800 mm, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 100 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 300 / 100 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic drawing press is a highly rigid four-column hydraulic press solution developed for metal drawing, deep-drawing, and precision pressing applications. The St52 grade steel welded frame undergoes stress relief by vibration, ensuring parallelism and perpendicularity tolerances remain stable over the full stroke length throughout the pressing process. The ram and die cushion systems operate independently; stroke and tonnage settings are precisely controlled via the touch panel. With REXROTH or PARKER hydraulic components, an IE3 class motor, and a PLC-controlled system, the press offers high efficiency and reliable operation. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements. With a 300 / 100 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal drawing, deep-drawing, and die applications. Key Advantages - High rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touch panel - High accuracy and repeatability - Long life, low maintenance cost design Application Areas - Metal drawing applications - Deep-drawing operations - Die testing and production lines - Auxiliary forming processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction hardened, chrome-plated shafts SLIDE GUIDING: Bronze Zr14 RAM CAPACITY: 300 tons DIE CUSHION CAPACITY: 100 tons Lodpfx Ajx N Unzodlshg DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 800 mm DIE CUSHION STROKE: 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 900 mm WELDING STRESS RELIEF: Vibratory stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec DRAWING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec DIE CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 390 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 Units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BED HEIGHT FROM FLOOR: 1300 mm FRONT FILLING VALVE: NG 125 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual Lsdpfow Slbvox Adlehg OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet, aluminum, or stainless steel materials Ideal for bending round and various diameter materials Lower and side rolls move vertically by direct hydraulic linear movement Protected against overloading The upper roll is driven by an electric motor and planetary reducer. The lower roll is powered via a cardan coupling system. Two rolls have powered rotation Positions of the rolls can be easily read via three digital displays The hydraulically opening head allows easy removal of the bent part Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel shaft movement Complies with EU safety standards and is CE marked Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Ledpfxjw Slkke Adlehg Ejector system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via body-mounted hydraulic cylinders * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft allow easy removal of the bent workpiece Lhjdpfjw Smc Iox Adlsg * Very easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC automation with control panel * Upper crane (hoist) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg