Haas Pig Dehairing Machine Type David nakup rabljenega (86.068)

Stanje: novo, Leto izdelave: 2025, moč: 4 kW (5,44 KM), stiskalna sila: 40 t, širina mize: 440 mm, dolžina mize: 700 mm, prebijalna sila: 40 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 35 mm, nastavitev hoda: 80 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press used in cold forming operations such as punching, cutting, and forming with dies. It operates by transmitting force through an eccentric mechanism. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance thanks to centralized automatic lubrication - Production-ready use with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold notching applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-point guided ram • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system Lodpjvtx Axofx Adlehg • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Compliant with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as specified • Eight-point guided ram ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between side frames: 330 mm Ram adjustment (setting): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage dimension: 575 mm Side anchorage dimension: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die holder slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10–70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: For any requests to modify the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 200 mm, širina mize: 1.100 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism and is used for cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock body, eight-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1100 mm table size - Die/equipment protection with hydraulic overload protection - Precise guidance via 8 guided ram + balancer piston - Controlled and user-friendly operation thanks to PLC + touchscreen - Enhanced operator safety with light curtain protective barrier Fields of Application - Punching/cutting/forming applications that require a large table - Mass production with automated feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake • Additional T-slotted mounting plate • Eight-guided ram • Adjustable stroke on the single connecting rod • Balancer piston in the ram • Fully automatic micro-lubrication system • PLC control system Ledex N Rwrjpfx Adlshg • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety barriers • Gear set in closed oil reservoir • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material ejection systems • Sliding safety guard in front of the table • Dies produced to customer specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 160 t, širina mize: 920 mm, dolžina mize: 660 mm, globina grla: 320 mm, prebijalna sila: 160 t, vrtina cilindra: 55 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages Lodpsvtywdefx Adlehg - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Areas of Application - Cold punching and cutting operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-point slide guiding • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain finger-hand safety system • PLC control system • Dual hand/foot pedal operation system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Complies with CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster table • Decoiler, feeder, and straightener • One set of dies per requested specifications • 8-point slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table-ram distance: 500 mm Slide-table clearance: 540 mm Distance between side frames: 500 mm Ram adjustment: 120 mm Approx. press width: 1,600 mm Approx. press depth: 2,280 mm Approx. press height: 2,750 mm Front anchor dimension: 840 mm Side anchor dimension: 1,300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approx. weight: 7,100 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 125 t, širina mize: 700 mm, dolžina mize: 900 mm, prebojna odprtina v mizi: 210 mm, nastavitev hidravličnega cilindra: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame, o Stress relief with vibration will be applied to the frame and welded components. o Parallelism and perpendicularity tolerance between tables in compliance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide supported by 8 guides o Slide equipped with cushion cylinder o Components such as slide, connection rod, and ram nose of cast steel, GS52 o High-strength solid crankshaft – 4140 o Bronze bushing in connection rod (Zr14) o Rear flywheel placement o Spare table set o Hydraulic overload protection o Motorized adjustment of bed-slide o Automatic central lubrication o Pneumatic pedal with latch and double hand control with timer o Electronic counter o PLC control system with touchscreen - DELTA o Electrical switchgear by SIEMENS-SCHNEIDER o CE conformity - OPTIONAL o Finger safety light barriers - SICK, LEUZE o Safety PLC (controls all electric system, valves, double-hand, and pedal) - PILZ o Dual-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in accordance with CE regulations. TYPE: D-TYPE MONOBLOCK FRAME Capacity: 125 Ton Distance Bed to Slide: 500 mm Distance Between Uprights: 1000 mm Slide Adjustment: 100 mm Approx. Press Width: 1250 mm Approx. Press Depth: 1750 mm Approx. Press Height: 2850 mm Bed Bore Diameter: 210 mm Bed Size: 700 / 900 mm Lhsdpfx Aevxhqvodlsg Die Holding Bore Diameter: 55 mm Slide Size: 340 / 550 mm Table Height from Floor: 850 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 RPM Approx. Weight: 8,500 kg

Stanje: novo, Leto izdelave: 2025, moč: 3 kW (4,08 KM), stiskalna sila: 35 t, hod: 70 mm, širina mize: 400 mm, dolžina mize: 600 mm, skupna masa: 1.500 kg, prebijalna sila: 35 t, nastavitev hoda: 45 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control + dual hand/foot control Applications: - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guides • Nodular cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 heat-treated steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double-coil safety valve • Manually adjustable stroke • Light curtain hand/finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor operation • Complies with occupational safety regulations • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety lock (standard for 200–300 ton) Lhjdpfx Asx N Nd Rjdleg • Spare bolster plate • Decoiler, feeder, and straightener • 1 set of die/tools as requested • Eight-point slide guiding ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable lower bolster area: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Distance bolster–ram: 330 mm Adjustment of ram: 45 mm Lower bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Yes Safety barrier: Yes Operation system: Pneumatic clutch–brake system Installation type: Floor-mounted Frame type: C-frame steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approx. machine dimensions (L×W×H): 1100×1400×1800 mm Approx. weight: 1500 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 900 mm, dolžina mize: 1.200 mm, prebojna odprtina v mizi: 260 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 200 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded parts by vibration Lodpfx Adsvyr Eaoljhg - Table parallelism and squareness tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Parts such as ram, connecting rod, and slide block made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushing in connecting rod (Zr14) - Rear-mounted flywheel - With spare bolster table - Fitted with hydraulic safety devices - Motorized die height adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand control with timer - With electronic counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE certification - OPTIONAL - Light curtain finger protection barriers – SICK, LEUZE - Safety PLC (monitors all electrical system, valves, dual-hand and pedal controls) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective safety guards per CE norms to be included TYPE: D TYPE MONOBLOCK FRAME Capacity: 300 Tons Shut Height (Table to Ram): 530 mm Distance Between Uprights: 1280 mm Ram Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 x 1200 mm Die Clamping Slot Diameter: 60 mm Ram Size: 470 x 900 mm Table Height from Floor: 1000 mm Stroke Adjustment: 20–200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 18,000 kg

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, širina mize: 670 mm, dolžina mize: 950 mm, prebijalna sila: 100 t, prebojna odprtina v mizi: 180 mm, vrtina cilindra: 45 mm, nastavitev hoda: 120 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Presses are mechanical press machines that operate with force generated via an eccentric mechanism, designed for cold forming operations such as punching, cutting, and shaping with dies. Thanks to their high production speed and repeatability, they are efficient and reliable solutions for mass production lines. CRONOSSTECH C-Type Eccentric Press 100 Ton is designed for stable performance in cold forming applications. Featuring a rigid steel frame construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers dependable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slideway guides • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts from 4140 tempered steel • Central full automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system Lhedpfx Adevtx Inolsg • Emergency reverse motor movement • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster • Decoiler, feeder, and straightener • One set of dies according to customer specs • 8-sided slideway guides ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between uprights: 420 mm Ram adjustment (shut height): 85 mm Approx. machine width: 1400 mm Approx. machine depth: 1900 mm Approx. machine height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Stroke per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 700 mm, dolžina mize: 880 mm, višina mize: 850 mm, prebojna odprtina v mizi: 200 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 110 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame, - Stress relief of the frame and welded components via vibration treatment. - Table parallelism and squareness tolerance in accordance with ISO and DIN standards. - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-point gibs - Slide equipped with cushion cylinder - Components such as slide, connecting rod, and ram head made of GS52 steel casting - High-strength monoblock crankshaft – 4140 - Bronze bushings for connecting rod (Zr14) - Rear-mounted flywheel - Equipped with spare bolster plate - Hydraulic overload protection - Motorized adjustable table-slide - Automatic central lubrication system - Pneumatic pedal with latch and double hand control with timer - Electric counter - PLC application and touchscreen – DELTA - Electrical components: SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light barriers – SICK, LEUZE Lsdjvxhpropfx Adljhg - Safety PLC (controls all electrical system, valves, double hand control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety wedge - Protective guards in compliance with CE regulations MODEL: D-TYPE MONOBLOCK FRAME Capacity: 100 Tons Distance Between Table and Slide: 450 mm Gap Between Side Frames: 960 mm Slide Adjustment: 85 mm Approx. Press Width: 1230 mm Approx. Press Depth: 1650 mm Approx. Press Height: 2500 mm Bolster Plate Hole Diameter: 200 mm Bolster Plate Size: 700 x 880 mm Die Clamping Slot Diameter: 50 mm Slide Size: 245 x 410 mm Height from Floor to Table: 850 mm Stroke Adjustment: 10 – 110 mm Strokes Per Minute: 50 spm Motor Power: 11 kW Motor Speed: 1450 rpm Approximate Weight: 7,500 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.070 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 130 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES • Steel construction frame • Stress relief by vibration for body and welded parts • Parallelism and perpendicularity tolerance between tables according to ISO and DIN standards • Pneumatic clutch and brake combination – OMPI-Italy • Ram mounted on 8 sliding guides • Ram with cushioning cylinder • Ram, connecting rod, and ram nose made from cast steel GS52 • High strength one-piece crankshaft – 4140 • Bronz bushing inside the connecting rod (Zr14) • Rear flywheel configuration • Spare bolster • Hydraulic overload protection • Motorized die height (ram) adjustment • Automatic central lubrication system • Pneumatic pedal with latch and dual-hand control with timer Ledpfovyr Diex Adljhg • Electrical counter • PLC control and touch screen – DELTA • Electrical switchgears by SIEMENS-SCHNEIDER • CE application – OPTIONAL • Finger safety light curtains – SICK, LEUZE • Safety PLC (controls all electrical system, valves, dual-hand, and foot pedal) – PILZ • Dual-coil safety valve – GPA , TOPAIR • Locked position switch and control panel • Safety block • Protective guards within CE requirements TYPE: D-TYPE MONOBLOC FRAME Capacity: 200 Tons Distance Table to Ram: 500 mm Distance Between Uprights: 1150 mm Ram Adjustment: 130 mm Approx. Press Width: 1500 mm Approx. Press Depth: 2000 mm Approx. Press Height: 3200 mm Bolster Hole Diameter: 240 mm Bolster Size: 800 x 1070 mm Die Clamping Slot Diameter: 60 mm Ram Size: 450 x 800 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 / 160 mm Strokes Per Minute: 40 SPM Motor Power: 18.5 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 14,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 850 mm, dolžina mize: 1.150 mm, prebojna odprtina v mizi: 240 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 160 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration for frame and welded parts - Parallelism and perpendicularity tolerance between tables complies with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram guided on 8 slides - Ram cushioning cylinder - Parts such as ram, connecting rod, and slide are steel cast, GS52 - High strength one-piece crankshaft – 4140 - Connecting rod inner bronze (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication - Pneumatic foot pedal with latch and time-controlled dual-hand operation - Electronic counter - PLC application and touchscreen – DELTA - Electrical switchgear components SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Finger guard light barriers – SICK, LEUZE - Safety PLC (monitors complete electrical system, valve, dual-hand, and pedal) – PILZ - Double coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective guards in compliance with CE standards TYPE D-TYPE MONOBLOCK FRAME Capacity 250 Ton Table-to-Ram Distance 520 mm Clearance Between Side Frames 1230 mm Ram Adjustment 150 mm Approx. Press Width 1600 mm Approx. Press Depth 2100 mm Approx. Press Height 3400 mm Table Bore Diameter 240 mm Table Dimensions 850 x 1150 mm Die Clamp Slot Diameter 60 mm Ram Dimensions 470 x 900 mm Lsdpfevyr D Asx Adljhg Floor-to-Table Height 950 mm Stroke Adjustment 20–160 mm Strokes per Minute 40 SPM Motor Power 22 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 16,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 200 mm, širina mize: 900 mm, dolžina mize: 1.800 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses deliver high stability and process security thanks to their rigid frame structures, especially in applications involving large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance under continuous operation conditions. Key Advantages - Stable operation for large dies with wide table dimensions - Die/equipment protection with hydraulic overload safety device - Precise slide guidance with 8-point guide and counterbalance piston - Controlled and user-friendly operation via PLC & touchscreen panel - Enhanced operator safety with light curtain protection system Application Areas - Punching/cutting/forming applications requiring a large bolster - Mass production lines with automatic feeding systems - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted extra bolster plate • 8-point guided slide • Adjustable stroke with single connecting rod • Slide with counterbalance piston • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety system • Motorized slide adjustment mechanism • Light curtain safety system • Enclosed gear system in oil sump • Dual-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of bolster • Custom die configuration on request Lodpfx Aex N Ru Djdlohg ✅ TECHNICAL SPECIFICATIONS (H TYPE – 150 TON) Capacity: 150 Ton Lower bolster usable area: 900×1800 mm Upper bolster usable area: 900×1800 mm Fixed stroke length: 200 mm Nominal material thickness: 7 mm SPM: 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of crankshafts: 2 Safety device: Hydraulic Control panel components: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating positions: 4 Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approx. machine dimensions (L×W×H): 4500×3000×2000 mm Approx. weight: 20 Ton Note: Please contact us for any changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses ensure high stability and process safety in large table and heavy die applications, thanks to their rigid frame construction. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press 300 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. With its monoblock frame, 8-guided slide system, hydraulic overload safety device, and automated lubrication infrastructure, it provides reliable performance suitable for continuous production conditions. Key advantages: - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-guided slide + counterbalance piston - Controlled and user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application areas: - Punching/cutting/forming applications requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted bolstering plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston in slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain protection • Gear system in closed oil reservoir • Double-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety guard at table front • Dies manufactured to desired specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2750 mm Press Height: 4700 mm Table Dimensions: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg Lhedsx N Rxvepfx Adlsg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.200 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frames, making them ideal for applications requiring large tables and heavy dies. The CRONOSSTECH CEHP 600 – H-Type Eccentric Press 600 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. It delivers reliable performance for continuous production with a monoblock frame, 8-point slide guidance system, hydraulic overload protection, and automatic lubrication infrastructure. Key advantages: - Stable operation with large dies thanks to a 2200×1200 mm table - Die/equipment protection with hydraulic overload safeguard - Precision guidance with 8-point slide + counterbalance piston - User-friendly and controlled operation via PLC + touch screen - High operator safety with light curtain protection Applications: - Punching/cutting/forming processes requiring large bolsters - Serial production with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing workflows ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • T-slotted bolster extension plate • 8-point slide guidance • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD interface • Motorized reverse stroke • Hydraulic overload safety system • Motorized slide adjustment mechanism • Light curtain safety barrier • Enclosed lubricated gear set • Double solenoid safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety door in front of the table • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Lhodpex N R A Uefx Adleg Capacity: 600 Ton Table-Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Size: 2200×1200 mm Ram face size: 2200×1200 mm Fixed Stroke: 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 60 t, širina mize: 590 mm, dolžina mize: 800 mm, prebijalna sila: 60 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 40 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming with dies. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot pedal control Application Areas: - Cold cutting and punching operations - Cold forging applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rods and gear housings • Crankshaft and transmission shafts from 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double-coil safety valve • Manual adjustable stroke • Finger–hand protection with light curtain safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • Custom-designed die set • Eight-slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table–ram distance: 360 mm Ram–table distance: 395 mm Distance between walls: 380 mm Ram adjustment (stroke): 70 mm Approx. press width: 1340 mm Lhedpfxsvtx D Nj Adleg Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchorage: 630 mm Side anchorage: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die clamping slot diameter: Ø40 mm Ram size: 340×220 mm Floor to table height: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 SPM Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please notify us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Tehnične lastnosti mostne rezkalne stroja Proizvajalec: ZAYER Model: KPU-5000 AR Leto izdelave: 11/2001 CNC krmilje: HEIDENHAIN TNC-430 Velikost mize: 6.500 x 1.800 mm Premik v vzdolžni osi (X): 6.500 mm Premik v prečni osi (Y): 3.050 + 873 mm Premik v vertikalni osi (Z): 1.250 mm Razdalja med stebri: 2.450 mm Maksimalna višina med nosom vretena in mizo s kroglasto glavo: 1.565 mm Maksimalna višina med nosom vretena in mizo z 45° glavo v vertikalni poziciji: 1.574 mm Hitri pomiki (X, Y, Z): 25.000 mm/min Maksimalni delovni podajalni pomik: 15.000 mm/min Lhodeyxv Unjpfx Adljg Glave: 45° Avtomatska glava VKLJUČENA, 45° glava (A / B os) 360.000 pozicij Avtomatska glava 45° Konus: ISO-50 – DIN 69871 Hitrost avtomatske glave 45°: 6.000 vrt/min Kroglasta rotacijska glava VKLJUČENA, vključno z direktno izhodno glavo Konus: ISO-50 Moč glavnega motorja: 37 kW Število stopenj hitrosti: 2 Ročno menjavanje glave VKLJUČENO Vlečni avtomatski nosilec na desni strani za 45° glavo VKLJUČENO Vlečni avtomatski nosilec na desni strani za direktno izhodno glavo VKLJUČENO Ethernet priključek VKLJUČEN Dvojni transportni trak za odrezke VKLJUČEN – po eden na vsaki strani stroja Rezervoar za olje prostornine 1.000 l z filtrirnim papirjem in magnetnim ločevalnikom VKLJUČEN Interno hlajenje s tlakom 20 Bar VKLJUČENO Eksterno hlajenje s tlakom 10 bar VKLJUČENO Avtomatski menjalec orodij VKLJUČENO Število pozicij menjalca orodij: 60 CNC funkcija 3D ROT VKLJUČENA Ostalo: Pozicijska točnost: 0,010 mm Ponovljivost: 0,005 mm Ročni kolesni upravljalnik: HEIDENHAIN HR-410 Nosilnost mize: 20.000 kg Teža stroja: 52.000 kg

Stanje: novo, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 1.500 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, položaj glave za glodanje: Universal-Diagonal-Fräskopf, največja hitrost vretena: 6.000 obr/min, širina mize: 1.100 mm, obremenitev mize: 10.000 kg, dolžina mize: 3.100 mm, skupna masa: 27.000 kg, vrtilni moment: 1.178 Nm, moč vretenovega motorja: 53 W, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, LAGUN BM 3 C bed milling centre with integrated rotary table – available at short notice The LAGUN BM 3 C is a highly rigid bed-type milling centre with an integrated rotary table designed for heavy-duty and precise machining. Ideal for both single-part and series production with the highest demands on rigidity, accuracy, and reliability – all without complex foundation requirements. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT Lsdem Tv Iijpfx Adlshg ✔ Lease-purchase / financing available ✔ No special foundation required (standard industrial floor sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in building bed-type milling machines. These machines impress with high reliability, ease of maintenance, and efficient operation. Technical specifications: Control: HEIDENHAIN TNC 7 CNC path control + 19" TFT display HEIDENHAIN motors, feedback systems and electronic handwheel HR-510 Integrated rotary table: Ø 1,100 mm Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: 40-position chain magazine with double gripper Chip removal: Double hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimetric) Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailored quotation

Stanje: rabljeno, Leto izdelave: 1983, Spindle diameter: 120 mm X-axis travel: 1250 mm Y-axis travel: 1250 mm Z-axis travel: 800 mm Spindle taper: ISO SK50 Maximum spindle speed: 2000 rpm Quill stroke: . mm Main drive motor: . kW Speed: . rpm Feed rate: . mm/min Control: Heidenhain type: iTNC 430 T-slot width: . mm T-slot spacing: . mm Table size: 1000 x 1000 mm Table load capacity: 4000 kg Total power requirement: . kW Machine weight approx.: . t Space requirements approx.: . m Machine no.: 62099 The machine table can be steplessly controlled for rotation. Tool magazine with 40 positions. Conversion from Bosch NC System 5 to Heidenhain iTNC 430 around 2000 The technical data are provided by the manufacturer or operator and are thus non-binding for us. Prior sale reserved; exclusively our terms and conditions of sale apply. About us: - Over 400 own machines in stock - More than 15,000 m² storage area, crane capacity 70 t - More than 10,000 accessory items for your workshop Lhodoyqv T Tjpfx Adlsg If you wish to sell machines, production lines, or your business, please contact us. You can find further offers on our website. Inspections possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Premer vretena 102 mm x-pot 1600 mm y-pot 1200 mm z-pot 1500 mm os w 700 mm Dimenzije mize 1250x1400 mm Število vrtljajev vretena 8-1600 Krmiljenje Heidenhain TNC 131 Skupna potrebna moč 15 kW Tehnični podatki so podatki proizvajalca oziroma uporabnika, zato zanje ne jamčimo. Vmesna prodaja pridržana; veljajo izključno naši poslovni in prodajni pogoji. O nas Lhodpfsyqt S Tsx Adleg Več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, žerjav nosilnosti 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali podjetje, nas kontaktirajte. Dodatno ponudbo najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.000 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 18.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 38 Nm, skupna masa: 65.000 kg, Initial commissioning: 2012 Control: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (below floor) with T-slots 18H12 / 250mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power demand: 85 kVA Dimensions, weights Space required (machine only, without peripherals): approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Lodpfx Adoyrdc Eslshg Additional equipment - Opening doors on both sides - 10-station tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 68.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.200 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 167 Nm, skupna masa: 35.000 kg, Premiere mise en service : décembre 2014 Commande : Fidia Axe X : env. 2 200 mm Axe Y : env. 3 500 mm Axe Z : env. 1 200 mm Axe A : ± 100° Axe C : ± 275° Machine sous tension : env. 68 000 h Heures total broche : env. 26 500 h Table de bridage : 2 000 x 3 500 mm avec rainures en T Tête à fourche 2 axes Puissance broche : 70 kW Vitesse de broche : max. 15 000 tr/min Couple : max. 167 Nm Porte-outils : HSK 100A Déblocage outil : hydraulique Entraînements axes linéaires Vitesse avance X, Y et Z : jusqu’à 50 m/min / 30 m/min Données de raccordement Tension : 400 V Fréquence : 50 Hz Ledpfx Asyrc Akjdlehg Dimensions, poids Encombrement machine hors périphériques : env. 8 000 x 6 000 x 5 000 mm Poids total : env. 35 000 kg Équipements supplémentaires - Installation de refroidissement - Changeur d’outils 26 positions - Carénage espace de travail - Convoyeur à copeaux En option, en supplément : - Palpeur de mesure radio - Laser BLUM État de la machine Entièrement fonctionnelle, en très bon état. Visible sous tension.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, HODI: 9000 x 1100 x 1000 mm HITRI POMIKI OSI: 24 m/min DIMENZIJE DELOVNE MIZE: 10.000 x 1500 mm MENJAVA ORODIJ: 42 mest MOČ GLAVNEGA MOTORJA: 55 kW VRETENO: 24.000 obr/min CNC: FIDIA C 20 Lsdpoyylfrofx Adlehg LETO: 2009

Stanje: rabljeno, Leto izdelave: 1989, Spindeldurchmesser 125 mm x-Weg 3000 mm y-Weg 1500 mm Steuerung Heidenhain TNC 355 Aufnahme ISO 50 w-Achse 600 mm Tischabmessung 1200 x 1500 mm Tischbelastung 5 t Spindeldrehzahlen 12 - 2300 U/min Spannung 380 V Automatischer Werkzeugwechsler (40 Plätze) Späneförderer Kühlmitteleinrichtung Lhodpeyqurzsfx Adlsg Spindelstütze Die technischen Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns Mehr als 400 eigene Maschinen auf Lager Über 15.000 m² Lagerfläche, Kran-Kapazität 70 t Mehr als 10.000 Zubehörartikel für Ihre Werkstatt Möchten Sie Maschinen, Produktionslinien oder Ihren Betrieb verkaufen? Dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 750 mm, širina mize: 1.500 mm, dolžina mize: 850 mm, največja hitrost vrtenja: 2.500 obr/min, poteza s peresom: 120 mm, SHW UF 5 Travel distances • X-axis (rotary table): 1,500 mm • Y-axis (spindle vertical): 1,000 mm • Z-axis (spindle horizontal): 750 mm Control • CNC control: Heidenhain TNC 355 Automatic Universal Milling Head (switches between horizontal and vertical machining) Quill: 120mm Spindle taper: SK 50 Lhodpfjvfm I Tsx Adljg Spindle speed: 2,500 rpm Partial overhaul in 2014 • Year of manufacture: 1990 • Inspection/Servicing 2025 Table assembly • Travel: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard enclosure We stock ALL spare parts for this SHW UF 5 series! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, supply of spare parts, on-site customer service, machine overhauls, and control retrofits. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control retrofit _____ Used machine - used milling machine - used bed type milling machine - universal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drilling and milling machine - used milling machine for metal - used metal milling machine - used cnc milling machine - cnc milling machines - milling machine - large part machining - cnc large component machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 1.000 mm, hitrost vretena (min.): 36 obr/min, širina mize: 800 mm, dolžina mize: 3.000 mm, največja hitrost vrtenja: 4.000 obr/min, Oprema: dokumentacija / priročnik, SHW UFZ 4 Fixed Column Bed-Type Milling Machine Travel Distances • X-Axis (Bed): 3,000 mm • Y-Axis (Vertical): 1,300 mm • Z-Axis (Spindle Head): 1,000 mm Control System • CNC Control: Heidenhain iTNC 530 Ledpjt Epnxjfx Adlehg Table Assembly • Clamping Surface: 3,000 x 800 mm - X-Axis Travel: 3,000 mm Universal Milling Head in Orthogonal Design • Swivel Range Tool Holder: 360 x 1 degree • Swivel Range Milling Head: 180 x 1 degree • Tool Holder: SK 50 DIN 69871 • Speed Range: 36 – 4,000 rpm RETROFIT in 2008 • Year of Manufacture: 1992 Chip Conveyor • Discharge Length: 3,000 mm Automatic Tool Changer • Magazine for 45 Tools About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control modernization. Our Services: - Used Machines - Spare Parts - Customer Service - Machine Service - Machine Overhauls - Control Modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC milling machines - CNC milling machines - milling machine - large part machining - CNC large part machining - milling - SHW - UFZ4S - UFZ 4 S - fixed column - bed milling machine - SHW Uniforce - Heidenhain iTNC 530 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, dolžina mize: 4.000 mm, širina mize: 1.500 mm, kapaciteta rezervoarja: 500 l, SHW PowerSpeed 5 Axis Travels • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 – 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head rotation range (mount): 360 x 1 degree • Milling head rotation range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Temporarily 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Table • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 liters Lhodpsw I Rz Hsfx Adleg Splash and Chip Guard • On one side, with 2 sliding doors, manually movable About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system retrofits. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system modernization ----- Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drill milling machine - used metal milling machine - used metal mill - used metalworking milling machine - used cnc mill - cnc milling machines - milling machine - large workpiece machining - cnc large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine