Vidmar 725/480/H1000 Mm nakup rabljenega (80.976)

Stanje: zelo dobro (rabljeno), Profesionalni digitalni mikrometer priznane znamke Mahr – model Micromar 40 EWR(i) – namenjen izjemno natančnim meritvam z nat natančnostjo do 0,001 mm. Naprava v izvedbi IP65, odporna na prah in vodo, idealna za uporabo v metrologiji, kontroli kakovosti in industrijskih delavnicah. . Merilno območje: 100 – 125 mm . Natančnost: 0,001 mm . Digitalni prikaz z velikim, preglednim LCD zaslonom . Zaščitna stopnja: IP65 – odpornost na prah in škropljenje . Funkciji „ABS“ in „Hold“ – hitro zaustavljanje merjenja in funkcija ničljenja . Visoka togost ohišja, ergonomski oprijem . V kompletu originalna škatla, certifikat, navodila za uporabo ter 100 mm merilni vzorec . Stanje: praktično novo / uporabljeno samo za testiranje Lrjdpfx Adjxl Rgioljl

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer priznane znamke Mahr, namenjen natančnim meritvam v industriji, delavnici in laboratoriju. Naprava se odlikuje z visoko natančnostjo ter robustno izdelavo, velik LCD zaslon pa omogoča hiter in enostaven odčitek rezultatov. . Merilno območje: 25–50 mm / 1–2” . Ločljivost: 0,001 mm (1 µm) . Funkcije: ZERO, ABS, REL, TOL . Razred zaščite: IP65 – odpornost na prah in brizganje vode . Napajanje: baterija CR2032 (3 V) . Ergonomična, natančna konstrukcija iz kaljenega jekla . Pregleden LCD zaslon . Kataloška številka: 4157042 . Proizvajalec: Mahr GmbH – Nemčija V kompletu: . Digitalni mikrometer Mahr Micromar 40 EWR-S . Merilni standard . Nastavitveni ključ . Dokumentacija in navodila za uporabo . Originalen transportni kovček Stanje naprave: zelo dobro – popolnoma tehnično brezhibna in pripravljena na uporabo. Odlična izbira za industrijske obrate, precizne delavnice in merilne laboratorije. Lrsdpexl Rf Sjfx Adlol

Stanje: zelo dobro (rabljeno), Prodajam rabljeno stiskalnico Klauke K18. Profesionalna mehanska stiskalnica ENERGOTYTAN KLAUKE K18 je zasnovana za najzahtevnejša elektroinštalacijska dela. Stabilna konstrukcija je primerna za uporabo tako na prostem kot v notranjih prostorih ter zagotavlja enostavno upravljanje. Lrsdpfx Adow Slkdjlol

Stanje: novo, Na prodajo visokokakovostna kompenzacijska (fleksibilna) cev znamke BOA, izdelana iz nerjavnega jekla, namenjena za industrijsko rabo. 📋 Tehnični podatki: Proizvajalec: BOA Tip: SP20 (valovita cev z obročki) Nazivni premer: DN50 Dolžina: 1100 mm Delovni tlak: PN16 Priključki: prirobnični Material: nerjavno jeklo (INOX) Konstrukcija: valovita cev + jeklena pletenica Lsdeyzixlepfx Adlerl Oznake: DIN / VdS ⚙️ Uporaba: industrijske instalacije vodovodne in plinske instalacije ogrevalni in parni sistemi kompenzacija vibracij in toplotnih raztezkov zaščita črpalk in armature 📦 Stanje: Novo – skladiščno blago (NOS) Možne manjše sledi skladiščenja (vidne na fotografijah). Izdelek popolnoma brezhiben, neuporabljen. ✅ Prednosti: visoka odpornost na temperaturo in tlak zelo dobra fleksibilnost trdna konstrukcija iz nerjavnega jekla zmanjševanje vibracij in hrupa v sistemu 📸 V kompletu: Točno to, kar je na fotografijah.

Stanje: novo, Na prodaj visokokakovostna kompenzacijska (fleksibilna) cev BOA, izdelana iz nerjavečega jekla, namenjena industrijski uporabi. 📋 Tehnični podatki: Proizvajalec: BOA Tip: SP20 (valovita cev) Nazivni premer: DN65 Dolžina: 2000 mm Delovni tlak: PN16 Priključki: prirobnični Material: nerjaveče jeklo (INOX) Konstrukcija: valovita cev + jeklena pletenica Označevanje: DIN / VdS ⚙️ Uporaba: industrijske instalacije vodne, plinske in parne inštalacije kompenzacija vibracij in toplotnih raztezkov zaščita črpalk, ventilov in cevovodov Lrjdpfxeyzi Hvo Adlel 📦 Stanje: Novo – skladiščeno blago (NOS) Možne manjše sledi skladiščenja (vidno na slikah). Neuporabljen izdelek, popolnoma delujoč. ✅ Prednosti: visoka odpornost na temperaturo in tlak zelo dobra fleksibilnost trpežna konstrukcija iz nerjavečega jekla zmanjšanje vibracij in hrupa 📸 V kompletu: Točno to, kar je na slikah.

Stanje: novo, For sale: high-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, specifically designed for industrial applications. This component is used for: - compensating for thermal expansion - damping vibrations and noise - reducing stress in piping systems Manufactured from stainless steel 1.4404 (INOX), it is ideal for demanding environments such as water, gas, industrial, and process installations. ⚙️ Technical Data Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged (flange type) Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Internal diameter approx.: 125 mm Total length approx.: 1500 mm Lrsdpfx Ajyzirxedljl ✅ Advantages ✔ Renowned manufacturer BOA ✔ Excellent corrosion resistance ✔ Long service life ✔ Vibration and stress damping ✔ Flexible design ✔ Quick installation (flanged) 📦 Included in delivery 1x DN125 compensator (as shown in the pictures)

Stanje: zelo dobro (rabljeno), Professional height gauge from the renowned Japanese brand Mitutoyo. The device is designed for precise height measurements and scribing on surface plates. Model with a measuring range up to 600 mm, equipped with a dial indicator and precise micrometric adjustment, providing highly accurate dimension control. The robust construction and high manufacturing quality typical of Mitutoyo ensure repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator graduation: 2.5 µm • Micrometric fine adjustment • Stable, heavy base • Clear measurement scale — Applications: • Height measurement of workpieces • Scribing on granite surface plates Lrodpfx Aey Dirqjdljl • Dimensional inspection • Workshops, toolrooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Equipment: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Stanje: rabljeno, Različni konzolni regali 4x regal: Mere: 6.125 x 2.400 x 3.000 mm Teža cca: 8.000 kg 2x regal: Lrsdpfx Aeyrq Nlsdlel Mere: 5.650 x 2.400 x 3.000 mm Teža cca: 7.380 kg Statični izračuni na voljo !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: rabljeno, Leto izdelave: 2008, Zebra 110pax4 label printer with pneumatic applicator. RA2315 Printer Manufacturer: Zebra Printer Model: 110pax4 Control Panel: LCD display with status indicator and keys on the printer, manual control panel on the side, and control via PLC I/O Printing Method: Selectable between thermal transfer printing or direct thermal printing Interfaces: Ethernet/control cable Print Media: Standard media, tags, and RFID media (reading and encoding of RFID labels) Current label size: 90x36mm, applicator is designed for this size Minimum label length: 12.7mm Media width: 16-114mm Ribbon width: 25.4-107mm Maximum ribbon length: 900m Core diameter: 25.4mm Maximum roll diameter: 101.6mm Resolution: 203 dpi (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Footprint: 700x700mm, with 100mm protruding for control panel/compressed air maintenance unit Applicator height: 800mm to the bottom edge Lrsdjux Sfzepfx Adljl Print/apply speed: approx. 2 seconds per label Electrical schematic included All prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802030369, lastna masa: 31.110 kg, največja dovoljena obremenitev: 34.889 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 01/2027, skupna dolžina: 7.390 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5*, barva: rdeča, Leto izdelave: 2022, The images are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with exchangeable 2" kingpin, container mounts: 1 x 20-foot container (centered) or swap body container 7.15 / 7.45 m, front not retractable, extended version twist locks for container securing. 24-ton, 2-speed landing gear, one-sided operation, with straight lower section, without compensating ram. Wheel chocks with holders, side underrun protection, aluminium rear underrun protection, with anti-spray mudflaps according to EU regulations, stainless steel (VA) drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, with perforated step plates approx. 400 mm wide, left & right between drip tray and longitudinal frame. Hose trays approx. 4500 mm long (incl. hose compartment) for pipe holders 2 x DN 200 external + 2 x DN 160 centered, rear hose compartment (VA steel) 300 mm deep, splash-proof, lid (VA steel) all around with rubber seal, with drain hole at lowest point, then lidless on hose pipes, stainless steel grounding lug rear in FR-right on frame with international grounding sticker on frame, rear right rear access steps on underrun protection, at main frame rear outer FR-right: step plate approx. 260 mm long and 300 mm wide. Axles & suspension SAF disc brake axles, "axle/chassis laser aligned" to reduce tire wear and fuel consumption, staggered axle spacing 1410/1310 mm (combined transport) up to 44 tons GCW. Air suspension, first axle automatic lifting axle, including forced lowering and start assist, operated via "3x brake activation" (start assist operable up to 30% axle overload and speeds up to max. 25 km/h). Braking system Lrsdpey Tvphefx Adlol 2-line compressed air braking system, color-coded line routing for easy service. Spring-loaded parking brake. 2 non-interchangeable coupling heads at front (without connecting line), EBS electronic braking system with EBS socket at front (without connecting cable). Note: The trailer must only be towed by tractor units that ensure proper ABS functionality! With raising and lowering valve, vehicle dynamic stability control. Axle load detection via EBS CAN-bus signal, for display in the driver cab (truck must be pre-equipped, no truck installation). Wheels & Tyres 385/65 R22.5, manufacturer’s brand of choice, steel rims, factory silver. Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lamps at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin socket at the front (without connecting cable). Operating Notes The total permissible weight stated is technically possible; however, depending on the load, the total weight may not be achievable while adhering to permissible axle, kingpin and saddle loads (poor handling may result from incorrect load distribution). This vehicle must only be loaded with 20’ tank containers compliant with ISO 668 and specifically ISO 1496-3! The tank containers must have "end-load-transfer areas". Approval/Country/Signs Warning sign according to ECE-70, ADR inspection as per 9.1.1.2 of ADR, EX/II, EX/III, approval certificate for vehicles transporting certain dangerous goods (ex. B3), with warning sign at the rear (not valid for substances according to UN 0331 and 0332 – explosives B-E), contour marking with reflective strips as per ECE R048, white at sides, yellow at rear.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: Lsdpfjy S E Spex Adlsrl 1- Spodaj - 5,5 kW 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: zelo dobro (rabljeno), Naprodaj opora (steady rest) za stružnico. Profesionalna delavniška oprema za stabilno vodenje dolgih in težkih obdelovancev med obdelavo. Močna lita konstrukcija – maksimalna togost in vzdržljivost. Delovna odprtina pribl. 150 mm (izmerjeno s suvilnikom). Odpirajoč okvir – hitro in udobno vpenjanje obdelovanca. Nastavljivi čepi z drsnimi konicami. Priprava za pritrditev na ležišče stružnice preko osnove z odprtino. Podpira je namenjena struženju gredi, cevi, palic in drugih dolgih elementov, ki zahtevajo oporo med obdelavo. Lredpsw Sfpyofx Adljl

Stanje: zelo dobro (rabljeno), Na prodaju je profesionalni mjerni set japanske tvrtke Mitutoyo, model SBM-25CXST (kat. br. 568-925). Set je namijenjen za precizno mjerenje promjera otvora i cilindričnih elemenata u rasponu od 12 do 25 mm. Sadržaj seta: digitalni unutarnji mikrometar Mitutoyo ABSOLUTE Digimatic s LCD zaslonom, tri mjerne glave: 12–16 mm, 16–20 mm, 20–25 mm, podešavajući prsteni: Mitutoyo 19,997 mm i HK66 19,001 mm, produžeci i dodatna oprema, originalna drvena kutija Mitutoyo s prilagođenom pjenom. ABSOLUTE sustav jamči stabilna mjerenja bez potrebe za ponovnim postavljanjem nule pri svakom uključivanju. Digitalno očitanje omogućuje brza i pouzdana mjerenja visoke točnosti. Set je u vrlo dobrom stanju, kompletan i spreman za rad. Idealan je za mjeriteljske laboratorije, odjele kontrole kvalitete i alatničke radionice. Lodjw R E Hvopfx Adljrl

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Lrsdpfjxmt Eqjx Adlol

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Lsdpfxemhhypo Adlsrl Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) Lrsdpfx Adsmhh Dhslel - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Lrodpfxjmhh Dzo Adlol - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. Lrsdpfxemhhx Ij Adljl According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing Lsdpfomhhyajx Adljrl - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation Ledjh Ek Daopfx Adlerl - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth Lrjdpfjmhh Ansx Adlol - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm Lrodpfx Aomhhf Ssdljl - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Ljdpfxemhhl Hj Adljrl Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Lrodpfx Adomidyfeljl Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Lredpomkixwjfx Adlol Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.