Naprava Za Ekstrakcijo Čistega Zraka S Stiskalnico Za Briketiranje nakup rabljenega (121.663)

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Lsdpfx Adjv Rpxlelehg Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density Lhedpfx Ajxfwdjdljg *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation Lhedefci D Ajpfx Adljg + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Ledpegfm Ryefx Adlohg Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Ledpfx Ajt Hxudjdlehg Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Lsdpfxew Ig Sus Adlehg Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: dober (rabljeno), Tehnični podatki: Briketirni stroj v dobrem stanju Letnik: 2007 Tehnični pregled v 06/2025 Cilindrična briketa 80 mm Pretok do največ 150 kg/h *le približno 3.949 delovnih ur - Hidravlična preša: briketirni stroj z izmetno stezo - Hidravlična enota: 4 kW Ljdpfx Aowtdk Tsdlshg - Tlak: maks. 300 bar - Transportne dimenzije: 1585/2140/H1940 mm - Teža: 1370 kg Garancija delovanja ob prevzemu Z veseljem omogočamo brezplačen preizkus!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Ljdpfed Nnwlex Adlohg Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Lhsdpfx Aeff Sbisdlsg Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen *Subject to prior sale *Round silo available at additional cost Press only deliverable with an additional plant component, such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Type Classic – throughput up to 425 kg/h *material dependent Options for an extra charge – plant engineering / mütek Systemtechnik: Ledjfhql Tspfx Adlohg - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary airlocks - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology Your benefits: Key point: + Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals. + Suitable for 24h operation + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics Technical data – Briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your input material *based on a bulk density of 200 kg per cubic meter Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Raw material requirements: - Moisture content (atro) must be min. 6% to max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient temperature at installation: minimum +8° C - Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Stanje: dober (rabljeno), Refurbished used machine *Options at extra cost, see below with full 1-year warranty Delivery time approx. 16 weeks after order Technical specifications: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Including 2 m press channel Main motor power: 45 kW Feed auger with geared motor: 2 x 2.2 kW Compactor auger: 2 x 5.5 kW Distributor auger: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and load display for main drive and feed augers PLC control: Siemens S7/300 with operating hours counter in the control cabinet Machine has CE mark Automatic start/stop function Dimensions: 3,100 x 860 x 1,800 mm (L x W x H) Weight: 4,500 kg Options: Silo for MAP series (only suitable for a MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. Lods E Dqujpfx Adlehg -Temperature control unit for press tools To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Prewired – absolutely necessary for operation Including corresponding control €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT. -Transfer pipe / cooling section (nominal: 4 x 2 m) Per 2 meters €990 net Assembly / commissioning (nominal per press approx. 2–3 days on site) Charged according to actual effort and time, invoiced separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/public holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and distance kilometer: €0.98/km Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense. Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate ---- Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Ambient temperature: heated room with at least +5°C - Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.

Leto izdelave: 2022, stanje: novo, Highlights of our two extraction systems Eco 3000 and Eco 5000 + Robust sheet metal construction ensures optimal airflow conditions + Durable impeller wheel + Consistent extraction performance even under continuous operation + Connection of up to max. 3/4 machines possible via supplied distribution manifold + High suction performance thanks to large filter surface (Filter size: ø500x1100mm) + Integrated undercarriage for easy maneuvering Scope of delivery: Undercarriage, filter and chip collection bag, distribution manifold (connection for 3/4xø100mm extraction pipes), incl. dust cover ---- The unit is available in two designs: *Below indicated as Position 1) and 2) 1) Extraction system Eco 3000 – 1.5 kW * with one chip bag and one industrial polyester filter Motor power S1 in W: 1500 Setup dimensions in mm: 985x560x2250 Extraction capacity in m³/h: 3,000 Extraction outlets: 3x (ø100mm) Vacuum in Pa: 2200 2) Extraction system Eco 5000 – 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1 in W: 2200 Setup dimensions in mm: 1540x560x2270 Extraction capacity in m³/h: 5,000 Extraction outlets: 4x (ø100mm) Vacuum in Pa: 2600 --- Applicable to both models: Sound pressure level in dB(A): < 85 dB Voltage: 400V / 50Hz Lhodjidma Nopfx Adleg *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Supplied boxed for easy self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for automatic filter cleaning system: + €4,700 net

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Briket: 150x60 mm Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg Lsdpfx Adjwcc D Relshg

Stanje: dober (rabljeno), Leto izdelave: 2016, CNC portalni termorezni stroj Proizvajalec: Sato Tip: Satronik D5765 Leto izdelave: 2016 CNC krmiljenje: Satocontrol CNC 3010 Ljdegqkc Nspfx Adlshg Tirna širina: 5.750 mm 6 avtogenih gorilnikov brez tirnice brez mize brez filtra 19526ä

Stanje: rabljeno, prevoženi kilometri: 350.000 km, moč: 353 kW (479,95 KM), prva registracija: 02/2016, vrsta goriva: dizel, skupna masa: 32.000 kg, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, pogon na vsa štiri kolesa, MAN TGS 41.480 EZ: km 8X6 Schaltgetriebe (manualni menjač) 6-stepeni retarder/pritarder Euro 6 !!!! 41 tona šasija !!!!! Vešanje: lisnato/vazdušno Registrovan u Austriji TÜV/Pickerl Nadgradnja: Palfinger kuka za podizanje kontejnera Godina proizvodnje: 2015 26 tona uređaj Savijajuća kuka Hidrauličko zaključavanje Beton-mikser Liebherr Godina proizvodnje: 2002 Sopstveni dizel motor Motor i mikser su potpuno remontovani pre 2 godine Mikser funkcioniše samostalno sa ili bez kamiona Lhsdpfx Adey Svlmoleg ---- nemački/engleski/srpski/hrvatski/bosanski/bugarski..... Goran nemački/engleski/p?????/?????..... Roman Rado ćemo se pobrinuti za vašu finansiranje ili lizing Prodaja u EU: netto, uz dostavljanje firmene dokumentacije i poreznog/VAT broja Povrat PDV-a depozit 2000 € Naša usluga za Vas: - Izvozničke tablice - Izvozna dokumentacija i EUR1 - Transport širom sveta - Mogućnost noćenja - Transfer aerodrom Minhen ili železnička stanica Pasau

Stanje: rabljeno, prevoženi kilometri: 272.500 km, moč: 132 kW (179,47 KM), prva registracija: 12/2011, vrsta goriva: bencin, konfiguracija osi: 2 osi, barva: sivo-črna, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2011, TITLE: IVECO EUROCARGO 75E18 WITH NEW DEMOUNTABLE BODY, LEAF SPRING FRONT SUSPENSION AND AIR REAR SUSPENSION REF.: 21C91 -300- YEAR: 2011 POWER: 180 HP ENGINE SIZE: 3920 cc EMISSION STANDARD: Euro 5 MILEAGE: 272,500 km TRANSMISSION: Manual DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: No AXLES: 2 WHEELBASE: 3,105 mm TRAILER COUPLING: Yes ORIGIN: Imported CAB: Short, low cab SEATS: 3 PAYLOAD: 3,290 kg - GROSS VEHICLE WEIGHT: 7,490 kg - GROSS COMBINED WEIGHT (TRUCK + TRAILER): 16,500 kg BODY TYPE: New hook-lift demountable system BODY MODEL: MEC 5.32 HYDRAULIC EXTENDER (SFILO): Yes BIN TILTER: No ROLLER: Yes ADR: No BODY DIMENSIONS FROM: 2.80 m + 0.20 m TO: 4.00 m + 0.20 m OVERALL LENGTH: 5.60 m OVERALL LENGTH WITH CONTAINER: 6.00 m ACCESSORIES: - Air conditioning - Automatic bell REFURBISHED: Yes INSPECTED: Yes TYRE CONDITION: 70% PRICE: €38,500.00 + VAT Displayed prices do not include VAT. Please contact our sales department for up-to-date prices and terms. For further information: Loris: 3484773001 Ljdpfxouc Hvts Adlshg URL: #thespecialistsofdemountablebodies SCARRABILI AURORA Specialists in the sale and purchase of industrial and commercial vehicles, with core expertise in waste management sector vehicles. Experts in trucks, trailers, and hook-lift systems. A large inventory available for immediate delivery - over 50 trucks and more than 150 containers, with or without hook lift cranes. Errors and omissions excepted (E.&O.E.) Due to the large number of listings and details, Aurora recommends checking the accuracy of all information with our sales staff.

Stanje: kot nova (razstavni stroj), Filter za čisti zrak Lodpfohfmpxsx Adljhg Tip: Power Unit 250 P FU Vrsta ponudbe: demonstracijski stroj Tehnični podatki: Moč motorja: 7,5 kW / 3 Ph / 400 V / 50 Hz Premer sesalnega nastavka: 250 mm Nazivni volumenski pretok: 3.534 m3/h Maks. volumenski pretok: 4.900 m3/h Podtlak pri Vnenn: 3.184 Pa Filtrirna površina: 22,4 m2 Čiščenje s stisnjenim zrakom vklj. integrirani predločevalnik vklj. integrirani gasilni sistem vklj. inverter za regulacijo hitrosti vklj. integrirano zvočno izolacijo (- 4 dB(A)) Zbiralnik odrezkov: 2 x 250 l Raven zvočnega tlaka: 71 dB(A) vklj. prašno zaporo Dimenzije D x Š x V = 3000 x 1058 x 2361 mm Teža: 850 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Naprava za čiščenje delov, IBS – rabljeno - : Cena na kos: 350 € (neto) Proizvajalec: IBS Scherer GmbH Tip: Tip F2 Leto izdelave: 2003 Serijska številka: 44675 Električni priključek: 1/N/PE 230V, 50Hz Nazivna moč: 18W, 0,2A Nosilnost: 60 kg Širina: 800 mm Lastna teža: 50 kg Velikost soda: sod 50 litrov Material ogrodja: jeklo Višina: 1125 mm Vrsta čiščenja: specialno čistilo Širina čistilnega korita: 790 mm Lhedsx El A Uopfx Adljg Globina čistilnega korita: 540 mm Stanje: dobro Na voljo: takoj Lokacija: skladišče Frankenberg / Saška

Stanje: dober (rabljeno), Leto izdelave: 2020, 2 paletové vozíky s nízkým zdvihem, elektrické nízkozdvižné vozíky se stojnou plošinou, elektrický paletový vozík 2 t, Jungheinrich, ERE 120 – použitý - : Cena za kus ze skladu: Pozice 6: 2 250 € (bez DPH)! Pozice 5: 3 950 € (bez DPH)! Výrobce: Jungheinrich Typ: ERE 120 Rok výroby: 2020 Nosnost: 2 000 kg Ljdjyrrgljpfx Adljhg Maximální zdvih: až 122 mm Těžiště nákladu: 600 mm Rychlost jízdy bez nákladu: 9 km/h Rychlost zdvihu bez nákladu: 0,04 m/s Napětí baterie: 24 V Kapacita baterie: 250 Ah Hmotnost včetně baterie: 630 kg Celková délka: 1 847 mm Provozní hodiny: viz seznam, stav leden 2026 – několik hodin od té doby přibylo Včetně nabíječky Stav: dobrý Dostupnost: ihned Místo: Erfurt, později sklad Augsburg Pozice 6 / 5 / další fotky ostatních zařízení na vyžádání! BH 1/26 Rok ERE01 98285577 Nízkzdvižný paletový vozík ERE 120 9 600 2020/9 ERE03 98285606 Nízkzdvižný paletový vozík ERE 120 2 168 2020/9

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1995, 1995 Comec MMO/5-CL+CA vodoravni dletni stroj z dvojnim nihanjem, CE označen, s 6 vreteni. Največja dolžina obdelovanca: 65 cm. Ljdpfxjx A T Dro Adlshg

Stanje: rabljeno, prevoženi kilometri: 323.000 km, moč: 331 kW (450,03 KM), prva registracija: 01/2014, vrsta goriva: dizel, konfiguracija osi: 3 osi, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2014, TITLE: IVECO TRAKKER 450 HOOK LIFT, FRONT LEAF SUSPENSION AND REAR AIR SUSPENSION, 8X4 REF: 25C41 YEAR: 2014 HORSEPOWER: 450 ENGINE CAPACITY: 12,880 cc EMISSIONS CLASS: Euro 6 MILEAGE: 323,000 km TRANSMISSION: Automatic DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: Yes AXLES: 4 (8x4) WHEELBASE: 4750 mm TOWING CAPACITY: Yes ORIGIN: Imported CAB: Short and low NUMBER OF SEATS: 2 PAYLOAD: 18,750 kg - TRUCK: 32,000 kg GVW / 40,000 kg for off-road use - TRUCK + TRAILER: 44,000 kg GVW / 56,000 kg for off-road use BODY TYPE: Hook Lift HOOK LIFT MODEL: SAURIER 26TON TELESCOPIC ARM: Yes TILTING: Yes ROLLER: No ADR (Hazardous Goods Approval): No BODY MOUNTING CAPACITY FROM: 3.70 m + 0.20 m TO: 6.20 m + 0.20 m OVERALL LENGTH: 8.75 m OVERALL LENGTH WITH CONTAINER: 9.05 m + 0.90 m telescopic extension bar ACCESSORIES: - Crane piping REFURBISHED: No INSPECTED: Yes TYRE CONDITION: 50% front tyres – 20% rear tyres PRICE: €82,500.00 + VAT Subject to errors and/or omissions All listed prices are exclusive of VAT. Please contact our sales representative for a current price and terms comparison. Lhedpfx Ajxa Ig Ajdlog For further information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA HOOK LIFTS operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in waste management solutions. Specialists in trucks, trailers, and hook lift equipment. A ready-to-deliver fleet with over 50 trucks and more than 150 bins and hook lift containers with and without cranes. E.&O.E. Given the quantity of listings and details, Aurora invites you to verify the accuracy of the data provided with our sales staff.

Stanje: rabljeno, moč: 353 kW (479,95 KM), vrsta goriva: dizel, konfiguracija osi: 3 osi, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 6, Leto izdelave: 2026, CHASSIS: ZCFE62RU10C522603 TITLE: IVECO X-WAY AD260 NEW HOOKLIFT, FRONT LEAF SPRING AND REAR AIR SUSPENSION 6X2 REF: 25C12 YEAR: 09/2024 HORSEPOWER: 480 ENGINE CAPACITY: 11,120 EURO: 6 KM: 0 TRANSMISSION: manual DIFFERENTIAL LOCK: yes RETARDER/INTARDER: yes AXLES: 3 6x2 WHEELBASE: 4,200 Lhsdpoyigxbjfx Adlog TOWING: yes ORIGIN: Italy CAB: short and low SEATS: 2 PAYLOAD: 14,500 kg - GROSS VEHICLE WEIGHT: 26,000 kg fully loaded - GROSS COMBINATION WEIGHT (TRUCK + TRAILER): 44,000 kg fully loaded BODY TYPE: new hooklift system HOOKLIFT MODEL: BOB 26/6 EXTENDABLE BOOM: yes SWIVEL FUNCTION: no ROLLER: vertical ADR: yes BODYWORK CAPACITY FROM: 4.50 m + 0.20 m TO: 6.10 m + 0.20 m OVERALL LENGTH: 8.10 m OVERALL LENGTH WITH CONTAINER: 8.40 m ACCESSORIES: - air conditioning - piping for crane and/or trailer - rear clamps - front clamps REFURBISHED: new OVERHAULED: new TYRES: 100% PRICE: €155,000.00 + VAT Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales department for up-to-date pricing and terms. For more information: Loris: +39 348 477 3001 URL: #thespecialistsofhooklifts SCARRABILI AURORA operates in the buying and selling of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. With a stock ready for immediate delivery of over 50 trucks and more than 150 bins, containers with and without hooklifts. E&OE Due to the number of listings and details provided, Aurora recommends verifying the information included with our sales team.

Stanje: rabljeno, prevoženi kilometri: 654.650 km, moč: 309 kW (420,12 KM), prva registracija: 10/2008, vrsta goriva: dizel, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2008, TITLE: USED SCANIA CV420 SKIP LOADER WITH FRONT LEAF SPRINGS AND REAR AIR SUSPENSION 8X2 2+2 REF: 26C10 YEAR: 10/2008 HORSEPOWER: 420 ENGINE DISPLACEMENT: 11,705 cc EURO STANDARD: 5 MILEAGE: 654,650 km TRANSMISSION: automatic DIFFERENTIAL LOCK: yes RETARDER/INTARDER: no AXLES: 4 WHEELBASE: 4,900 mm TOWING: yes ORIGIN: Italy CAB: short and low SEATS: 2 CAPACITY: 18,250 kg - TRUCK GVW: 32,000 kg fully loaded - TRUCK + TRAILER GVW: 44,000 kg fully loaded BODY TYPE: skip loader SKIP LOADER MODEL: MEC SCK267L EXTENDABLE: yes SWIVEL: yes Ljdpfey Schuex Adlehg ROLLER: vertical ADR: no BODYWORK OPTIONS FROM: 4.50 m + 0.20 m TO: 7.00 m + 0.20 m TOTAL LENGTH: 8.89 m TOTAL LENGTH WITH CONTAINER: 9.29 m ACCESSORIES: - air conditioning - front and rear clamps REFURBISHED: no INSPECTED: 12/04/2025 TYRE CONDITION: 40% PRICE: €48,500.00 + VAT (Errors and/or omissions excepted) The prices shown do not include VAT. Please contact the sales team for an updated discussion of prices and conditions. For further information: Loris: 3484773001 URL: #theskiploaderspecialists AURORA SKIP LOADERS operates in the industrial and commercial vehicle sales and purchase sector, specializing mainly in the waste sector. Specialists in trucks, trailers and demountable/skip loader equipment. With a ready-to-ship fleet of over 50 trucks and more than 150 bins, containers with and without skip loader cranes. E.&O.E. Given the large number of listings and details, Aurora invites you to verify the accuracy of the information with our sales staff.

Stanje: rabljeno, prevoženi kilometri: 192.200 km, moč: 331 kW (450,03 KM), prva registracija: 01/2017, vrsta goriva: dizel, konfiguracija osi: 3 osi, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2017, TITLE: IVECO TRAKKER 340T45 DEMOUNTABLE WITH LEAF SPRINGS FRONT AND REAR 8X4 2+2 Lhjdpfxsyvan Sj Adljg REF: 26C16 YEAR: 01/2017 HORSEPOWER: 450 ENGINE SIZE: 12,880 cc EMISSIONS: Euro 6 MILEAGE: 192,200 km TRANSMISSION: Automatic differential lock: Yes RETARDER/INTARDER: Yes AXLES: 4 - 8x4 2+2 WHEELBASE: 4,750 mm TOWING: Yes ORIGIN: Imported CAB: Short and low SEATS: 2 PAYLOAD: 18,750 kg - TRUCK: 32,000 kg fully loaded / 40,000 kg for off-road use - TRUCK + TRAILER: 44,000 kg / 56,000 kg for off-road use BODY TYPE: Hooklift (demountable) HOOKLIFT MODEL: MULTILIFT 26Z EXTENDABLE ARM: Yes SWING ARM: Yes ROLLER: No ADR: No BODYWORK ADAPTABILITY: FROM: 3.70 m + 0.20 m TO: 6.20 m + 0.20 m TOTAL LENGTH: 8.70 m TOTAL LENGTH WITH CONTAINER: 9.00 m + 0.80 m extendable bar ACCESSORIES: - 0.80 m extendable bar - 2 hydraulic cylinders on 4th axle REFURBISHED: No OVERHAULED: Yes TYRES: 60% PRICE: €89,500.00 + VAT Subject to errors and/or omissions. The prices shown do not include VAT. Please contact our sales department for up-to-date price lists and terms. For further information: Loris: +39 3484773001 URL: #thespecialistsofhooklifts SCARRABILI AURORA works in the sale and purchase of industrial and commercial vehicles, specialising mainly in the waste sector. Specialists in trucks, trailers, and hooklift equipment. With a fleet available for immediate delivery: over 50 trucks and over 150 bodies/containers, with and without hooklift cranes. E.&O.E. Due to the large number of listings and details provided, Aurora invites you to confirm all data with our sales staff.

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: 090924, Temperirna naprava proizvajalca Single, rabljena in netestirana. Naprava je zasnovana za temperiranje orodij, brizganje plastike ter industrijsko procesno tehniko. Deluje v enokrožnem sistemu z regulacijo SBC. Sredstvo je voda*, največja dovedena temperatura je 30 °C. Grelna moč ni navedena, zmogljivost črpalke je 28 l/min in 3,2 bar*. Leto izdelave je 2009, skupna teža je 105 kg. Lodey Su Efopfx Adlshg