Handtmann, Loma Vf616, Iq², Al nakup rabljenega (9.528)

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Ledoyk I U Aopfx Adljhg Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Leto izdelave: 1998, stanje: dober (rabljeno), Sawdust extractor, dust extraction unit, self-cleaning negative pressure filter ALKO ECO JET The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high unit efficiency. It is perfectly suited for all types of dry dust in various technological processes. Filter bags can be exchanged according to specific requirements and applications. Year of manufacture: 1998 5.5 kW fan positioned on the clean air side, which minimizes the risk of explosion initiation. Inlet diameter: 250 mm Capacity: 4,320 m³/h Filtration surface: 29 m² Vacuum: 3,700 Pa "Fireman" extinguishing system Air return ATEX-certified safety flap Fire protection flap Noise damper "Fireman" extinguishing system Control cabinet with automation for starting up to 8 machines Technical documentation included Extractor dimensions: Lsdpfx Aoiu Hq Dedlehg Height: 3.05 m Base width: 2.75 m x 1.00 m

Stanje: rabljeno, Leto izdelave: 2024, The control of the dedusting system is switched on and off via two sensors. Suitable for installation on an existing conveyor system Sword Brush Micro-moistening of the brush elements using an antistatic humidification nozzle by Riepe. Moistening can be precisely adjusted through this nozzle. Cleaning of the product surface via sword brush technology. Dust particles are collected by the brushes and removed by the extraction system. A rotating doctor blade and compressed air nozzles ensure continuous cleaning of the brush system. Power-Channel The Power-Channel contains 14 rotating dual power compressed air nozzles, which pneumatically remove particles or dust from the material surface and recesses. The extraction system disposes of the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the circulating brush Dust extraction: 2 x D120 mm top + 2 x D80 mm on the side Motorized height adjustment Material to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Lodpfx Aeun N Auodlohg Acceptance standard: Workpiece surface dust-free Important: Adhesive residues will not be removed. Machine dimensions: Width: 2,280 mm Installation length: 500 mm

Stanje: zelo dobro (rabljeno), Neprekinjeni vakuumski polnilnik za neposredno polnjenje, porcioniranje in zvijanje Opcijsko: naprava za zvijanje in držanje Vse v enem – 80-litrski lijak s protiročno roko in ojačano strgalo, nagibanje ter zaklepanje lijaka Vhod lijaka: premer 100 mm Integrirana vakuumska črpalka Lodpod S U Najfx Adlohg Programski pomnilnik za 99 polnilnih programov Teža porcije: od 5 do 60.000 g Električna moč: 4 kW Dimenzije stroja v cm: Širina: 70 Dolžina: 90 Višina: 165 Dobavni rok: 20 delovnih dni po predplačilu

Stanje: rabljeno, Vakumský plnič VF 50 Handtmann Kontinuální vakuový plnič pro rovné plnění, porcování a kroucení Kapacita: 80 litrů Integrované vakuové čerpadlo Vstup násypky: průměr 100 mm Hmotnost porce: 5 až 60 000 g Lhsdpownw U Ijfx Adleg Elektrický příkon: 4 kW Rozměry stroje: 70 x 90 x 165 cm Hmotnost porce: 5 až 60 000 g

Stanje: rabljeno, Neprekinjeni vakuumski polnilnik za direktno polnjenje in porcijo Vhod zalogovnika premera 100 mm Integrirana vakuumska črpalka Integrirano dvigalo Električna moč: 9,5 kW Dimenzije stroja v cm: Širina: 175 Dolžina: 140 Višina: 205 Lhjdpfx Adeh Uxxtslsg Dobavni rok: 20 delovnih dni po prejemu avansnega plačila

Stanje: novo, Efficient Extraction of Coolant and Lubricant Mists Directly at the Machine Tool The two standard units, AL-KO OIL JET 600 and OIL JET 1200, offer the perfect solution for directly extracting oil and emulsion mist from all common turning, grinding, and milling machines. Fields of Application: AL-KO OIL JET units are used wherever oil and emulsion mists arise during production processes on modern machining equipment and need to be extracted directly from the processing chamber. Depending on the size of the machining area, operating time, and the type of coolant used, either the OIL JET 600 or the higher-capacity OIL JET 1200 model is selected. AL-KO OIL JET units are suitable for all standard cooling and lubricating fluids and can be mounted directly onto the machine tool or placed next to it on an optional floor stand. Lhsdpowwt Tlsfx Adlsg Operating Principle: The highly effective filter system in AL-KO OIL JET units is equipped as standard with a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st filtration stage: washable metal mesh filter 2nd filtration stage: filter mat (LoTex®) with frame 3rd filtration stage: main filter cassette (ePM1 80%) The first stage captures coarse particles. The second stage consists of a drained, nano-coated mat that separates and channels off emulsified liquids. The third stage filters out the finest residual particles. The emulsions, predominantly separated in the second filter stage, are collected in the base of the unit and can be discharged. Applications: - Lathes - Machine tools - Chip-removal machines Advantages: - Compact design - High separation efficiency due to three-stage filtration system - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Stanje: novo, Oprema: odsesavanje prahu, For all industrial processes where dust and coarse particles are released, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly efficient filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and transported through a suction line to the AL-KO CLEAN UNIT D inlet. In a generously sized pre-separation chamber, coarse particles are separated out. The subsequent filter cartridges, classified as dust class “M,” remove the remaining fine dust. The differential pressure-controlled filter cleaning system cleans the filter cartridges of adhering particles even during operation. Venturi nozzles on the filter cartridges increase the cleaning effectiveness, ensuring consistent suction power and long filter life. Collected dust is deposited in an easily movable container with a disposable collection bag for low-dust disposal. The purified air is released back into the room from the top of the unit. Applications: - Direct extraction of dust and chips - For single or multiple extraction points - Suitable for connection to machines, extraction tables, booths, and ductwork - For metal and plastic processing, and many other industries - In grinding, polishing, filling processes, and much more Advantages: - High suction power thanks to an efficient fan and cleanable filters with long service life - Suitable for a wide range of applications - Extremely quiet due to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play Ljdpowwkrfsfx Adlehg

Stanje: novo, Leto izdelave: 2025, A completely reliable, mobile family: You can obtain AL-KO POWER UNIT® extraction systems for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium extraction volumes or an ideal supplement to existing stationary systems. Your benefits: • IE3 motor as standard • Approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content reliably maintained at 0.1 mg/m³ (wood dust) • Optionally available with type-tested rotary valve (FSA) • Tested backflow flap • Integrated automatic extinguishing system Ledpefzbqyefx Adlehg Technical specifications: • Rated motor power: 15.0 kW / 3 ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 10,000 m³/h at the fan • Rated airflow: 7,127 m³/h • Negative pressure at rated airflow: 3,000 Pa • Inlet diameter: 355 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,351 • Net weight (without packaging): 1,040 kg

Stanje: novo, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various production areas and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series units are equipped with clean-air side fans that draw dust- and chip-laden air to the filter unit. The high-performance DUO models feature two fans operating in parallel. A flange at the filter unit inlet allows for connection of custom pipe diameters. The aerodynamically optimized airflow in the separation chamber ensures that coarse particles are separated directly before reaching the filter bags. Remaining dust collected by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system; the separated material is discharged into mobile collection containers beneath the filter. Lsdpfswwtuisx Adlehg Applications: - Extraction at production machines, machining centers, pipe systems with multiple suction points - Direct extraction for continuous operation - Suitable for industries such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics production and processing, paper production, orthopedics industry, and many others Advantages: - Wide range of standard extraction systems with numerous customer-specific customization options - Consistently high suction power thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, since 100% recirculation mode is possible in many cases - Compact design requiring minimal space - Suitable for indoor and outdoor installation - Available in ATEX-compliant configurations - Comprehensive accessories and numerous options for individual system configuration - Eligible for BAFA funding according to Module 4

Stanje: novo, Wet paints contain, in addition to pigments and additives, other harmful substances that must be effectively extracted. AL-KO COLOUR JET extraction units provide the ideal solution here, offering four different power levels to ensure sufficient reserves at all times. The COLOUR JET series devices are optimally designed for extracting paint mist and solvents in wet painting workstations. The front deflection plate ensures collection at the bottom and at the side inlets, as solvents from paints tend to sink and accumulate near the floor. Simultaneously, the deflection plate enables uniform air distribution across the filter, protecting the filter medium from direct exposure. Paint pigments are captured by the large-area replaceable filter, and the purified exhaust air is then directed outdoors via a pipe or hose system. Applications: - Wet painting workstations in trade, industry, and workshops Ledpfx Adjwv T R Ujljhg - Painting workstations in ATEX Zone 2 areas Advantages: - Clean and safe painting workstations thanks to high extraction capacities and effective filtration system - Flexible application thanks to mobile design - Cost-effective and powerful, can replace a closed painting booth in many cases - Safety ensured by certification for use in potentially explosive atmospheres (ATEX Zone 2) - Customizable with extensive accessory options

Stanje: novo, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations or with welding robots. Functionality: The welding fumes generated at the worksite are captured, among other ways, via extraction arms and hoods and conveyed through ductwork to the intake nozzle of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are separated out. The subsequent filter cartridges, rated dust class 'M', then filter out the remaining fine particulates. During extraction operation, the differential pressure-controlled filter cleaning system removes adherent particles from the filter cartridges. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent extraction performance and a long filter lifespan. A flow monitoring system continuously supervises the required extraction rate and issues a warning if the target value is not met. The collected dust is deposited in an easily movable container. The purified air is returned to the room from the top of the unit. Applications: Lhedpfx Adowwkvqjljg - Suitable for all welding tasks with unalloyed or low-alloy steels - Usable for extraction at individual welding stations and for duct systems with multiple extraction points - Extraction from fixed hoods and welding tables Advantages: - Consistently high extraction performance thanks to an efficient fan and cleanable, long-life filters - Extremely quiet due to highly effective sound insulation - Suitable for individual workstations and connection to ductwork - IE3 motors for high energy efficiency - Broad range of capacities - Suitable accessories available for various welding applications

Stanje: novo, Thanks to their modular design, the PROFI JET® series system filter units enable the customised planning and construction of extraction solutions for almost any required air volume and virtually any conceivable application. The proven system also offers superior noise protection due to its insulated wall panels, and minimises heat loss when installed outdoors. Eligible for BAFA funding under Module 4. Functionality: The custom-designed extraction systems of the PROFI JET series are based on a robust steel frame as the core structure. The frame is completely enclosed with insulated, double-walled, powder-coated steel sheet panels, providing dust and weather protection for all system components—including fan, filter cleaning, and discharge components—within the sealed system housing. The clean-air side fans are installed in the upper section of the unit and draw dust- and chip-laden air into the filter unit. A large pre-separation chamber ensures effective separation of coarse particles and chips. Subsequent filter bags or cartridges then capture the remaining fine dust. The cleaned air is directed through a sound-insulated return air chamber either back into the building or outdoors. Applications: - Extraction from multiple processing machines, workstations, or entire production areas - Room ventilation and extraction for enclosures and work cabins - Suitable for virtually all types of dust and chips - Also suitable for dusts and applications with ATEX classification - Primarily used in industries such as wood, plastics, metal, welding, cutting, recycling, and many more Advantages: - Customised, precise planning and implementation of your extraction system - Cost-effective and fast delivery thanks to modular construction with standard components - Quiet and energy-efficient due to the use of insulated panels - Consistently high extraction performance thanks to integrated pre-separation chamber and AL-KO OPTI JET® filter cleaning system - Lower heating costs, as 100% recirculation operation is possible in many cases - Space-saving due to compact design - Suitable for indoor and outdoor installation - Professional appearance thanks to powder-coated panels - Available in ATEX-compliant versions Lhedpfx Aewwryqjdleg - Extensive accessories and numerous options for individual system configuration - Eligible for BAFA funding under Module 4

Stanje: novo, The AL-KO CLEAN VAC central vacuum systems are the ideal solution for direct extraction at hand-operated processing machines and as central cleaning vacuums for entire workshop or production areas. Wherever strong suction power is required or long pipe runs need to be overcome, AL-KO CLEAN VAC units are the perfect solution. Applications: Ljdpjwwt Aaofx Adlshg - Extraction for hand-operated processing machines, e.g. in carpentry shops, grinding shops, and training workshops - Cleaning vacuuming of floors and machinery in workshops, production areas, or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via filter in dust class M (residual dust < 0.1 mg/m3) and optional H13 / H14 secondary filter stage - Attractive appearance and weatherproof design - Low-noise operation thanks to a sound-insulated and powder-coated housing - Easy to handle: set up, connect, and immediately ready for use at the customer’s site

Stanje: novo, Leto izdelave: 2025, The POWER UNIT 160 P is a certified clean air dust extractor, designed in a self-supporting, powder-coated steel sheet construction. The unit complies with the latest regulations and is certified with the BG-GS test mark according to GS-HO-07, including the H3 test mark for residual dust concentration. This allows the extractor to be installed directly in the working area without additional fire or explosion protection measures for this size category. The POWER UNIT 160 P is suitable for both single extraction points and as a supplement to a stationary system. This extractor serves as a decentralized extraction unit for universal applications with a variety of materials such as wood and engineered wood products, paper, plastics, metals, stones, and more. Its compact dimensions make it possible to use even in confined workshops. Your benefits: • Compact design • Maximum reliability • High extraction performance • Integrated pre-separator • 100% air recirculation; residual dust content < 0.1 mg/m³ • Low noise emission • Extended filter service life • Easy emptying • Ready-to-plug-in delivery • Optional rotary valve or briquetting press available Technical data: • Inlet diameter: 160 mm • Nominal motor power: 2.2 kW; 4.6 A, 3 Ph; 400 V/50 Hz • Max. air flow rate: 2,000 m³/h • Air flow rate at inlet at 20/22 m/s: 1,448/1,592 m³/h • Negative pressure at inlet at 20/22 m/s: 2,503/2,399 Pa (with loaded and cleaned filters) • Filter surface area: 9.1 m² (23 x Ø 125 mm, 1,000 mm long) • Filter cleaning: Compressed air cleaning, AL-KO OPTI-JET® • Filter material: Cat. M, antistatic, white, washable • Filter load: 159 m³/(m² x h) • Max. sound pressure level: 71 dB(A) (free-field measurement according to DIN EN 11201, measured at 1 m distance) • Chip collection volume: approx. 165 (241) liters • Electrical connections: 5 m connecting cable with CEE plug • 5-pin, 16 A with phase inverter • Compressed air supply: ½” standard plug with maintenance unit (compressed air consumption: 108 Nl / 6 bar) • Air flow monitoring: Differential pressure switch with warning light on control panel • Dimensions (L x W x H): 1,718 x 830 x 2,050 mm • Mobility: 4 plastic castors 125 mm, two are swivel-type, one lockable • Weight: approx. 340 kg Lhodpfx Ajfydzbodleg • Configuration / control side: selectable right / left • Finish: RAL 7001 (silver grey) and RAL 7035 (light grey)

Stanje: novo, The AL-KO POWER VAC series units are used wherever strong suction power and high air flow volume are required simultaneously. Typical applications include chip extraction on saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A vacuum of up to 10,000 Pa ensures that chips and dust are quickly and safely extracted directly at their source. This guarantees smooth production processes and consistent product quality. The bag filters guarantee a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a duct system, allowing multiple processing machines to be linked to the dust extractor. All AL-KO POWER VAC units are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control unit featuring an integrated frequency inverter. This allows the extraction performance to be adjusted to specific operational requirements at any time. Lhodpfx Adewwt E Uelog Applications: - Cleaning floors, machines, and workstations in industrial and trade environments - Extracting dust from hand-guided processing machines during grinding, milling, sawing, deburring - Vacuuming dry dusts up to dust class ST1 - Direct extraction at small process and work machines Advantages: - High suction power up to 10,000 Pa vacuum - Optimum filter cleaning thanks to jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirement - Energy savings through standard frequency inverter for precise adjustment of extraction power - Low operating noise – integrated silencers and soundproofing elements enable installation directly in the working area

Stanje: potreben popravila (rabljeno), Polnilka HANDTMANN VF200 B. Stroj je namenjen za obnovo. Za več informacij me kontaktirajte. Lodeyvrmbjpfx Adljhg

Stanje: rabljeno, Leto izdelave: 2022, AL Tech Alline 3-valjni sistem za etiketiranje (2022), etiketa za pašček/kapico, prednje/zadnje telesne etikete, steklenice do 1000 ml, PLC krmiljenje, termalni tiskalnik Markem Imaje Smart Data X30, obesno upravljanje, rotacijski zbiralnik izhoda. Serijska številka: 2208040028086 (2022). Država porekla: Italija. Lhedey D Ruyjpfx Adleg Opomba: Ta lot se nahaja v Birminghamu, Velika Britanija. Strošek v višini £250 za razstavljanje in natovarjanje na ustrezen transport bo samodejno dodan na vaš račun ob nakupu tega izdelka. Blokiranje in zavarovanje bosta na stroške kupca.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, Handtmann VF-608 plus F, P.A. Leto 2015 Stroj je bil popolnoma obnovljen z uporabo samo originalnih delov. Ledpfx Adjymybgjlehg 3 mesečna garancija na dele. Vsa tesnila, ležaji in semeringi so novi. Servomotorji, menjalniki in vakuumska črpalka po popolni obnovi. Nova upravljalna plošča. Stroj z vtičnico za sponke. Pribor: mast, mazalka, ključ za rotor, ključ za lijak, strgalo, set lijakov in tehnična dokumentacija. Stroj vključuje povezovalni menjalnik AG-410. Čas dostave: pripravljen za dostavo.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, HANDTMANN VF-608 plus F,P.A. Leto izdelave: 2015 Stroj je bil popolnoma obnovljen z uporabo samo originalnih delov. 3-mesečna garancija na dele. Vsa tesnila, ležaji in semeringi so novi. Lsdpfxopy Edle Adlshg Servomotorji, zobniki in vakuumska črpalka po popolni obnovi. Nova upravljalna plošča. Stroj s priključkom za klipanje. Dodatna oprema: mazivo, pištola za mazanje, ključ za rotor, ključ za lijak, strgalo, komplet lijakov in tehnična dokumentacija. Stroj vključuje povezovalni menjalnik AG-410. Dobavni rok: pripravljen za dostavo.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupne dimenzije 1050x630x/2280 mm; lijak 60/100 l; napajanje 400 V, 50 Hz; moč 3 kW; zmogljivost polnjenja do 2000 kg/h; polnilni tlak 25 bar/maks. 40 bar; rotor z 10 standardnimi krili; porcijanje z natančno nastavitvijo od 0,1 g; povratno sesanje mletega mesa; kompenzacija teže prve porcije; električni impulzni nadzor za spenjač; razpon porcije od 5 do 100.000 g; zmogljivost porcijanja do 300 porcij/min; teža 475 kg. Lhedpfx Adoyzndmjlog

Stanje: dober (rabljeno), 1 x detektor kovin Loma Lodpfxey A Rx No Adlshg Izmet s potisno roko Odpirač: 450 mm širina x 125 mm višina

Stanje: novo, - NEW - - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy to maintain, long filter service life - Universally applicable, variable accessories - High flexibility - Mobile construction - Extraction technology with front plate system - Mobile (on wheels) Technical Data: - Inlet connection: 1000x1000 mm - Motor rated power: 1.5 kW, 3.4 A, 3-phase, 400V/50 Hz/1410 rpm - Air volume flow: 4600 m³/h - Usable negative pressure: 500 Pa - Filter area: 1.0 m² Lhsdpov Svcyofx Adlog - Filter cleaning: none - Filter material: green (1 piece) - Filter load: 4600 m³/m²/h - Residual dust content: max. separation efficiency approx. 97% - Control automation: none - Electrical connections: Single-stage switch, +5 m connection cable with safety plug, 1-pole, 10A fuse required on site - Compressed air supply: none - Max. sound pressure level: 72 dB(A) + measurement uncertainty 4 dB (DIN EN ISO 11201 free-field measurement) - Chassis: 4 swivel castors with thermoplastic coating, D=75 mm - Dimensions (W/H/D) mm: 1012x1405x915 (1887x1405x1144) - Approx. machine weight: 175 kg . 195 627 01

Stanje: novo, Technical Data: Ljdpfx Adsvwfm Solehg Max. volumetric flow rate in m³/h: 6,800 Max. negative pressure in Pa: 500 Rated motor power: 0.75/2.1 kW ex (suitable for installation in Zone 2 according to ATEX) Filter area in m²: 2 Dimensions (W x D x H) in mm: 2,971 x 1,405 x 1,131 Connection diameter: 300 mm Switch: 2-stage 5 m cable with plug and throttle valve

Stanje: rabljeno, Attachment filter Intermediate filter / blow-through filter Vacuum system suitable for container feeding Lhodpfxevxa N Ds Adljg used, good condition, brand: ALKO Length: 1400 mm Width: 1400 mm Height: 3000 mm Suction / blowing nozzle diameter: 2 x 250 mm Enclosure with discharge / fan approx. 2.0 kW, diameter 160 mm Air recirculation possible with fans, 2 pieces 2 x 2.0 kW Diameter: 250 mm Location: 97447 Gerolzhofen Delivery in current condition as inspected - free loading -