Centauro Tračna Žaga Centauro Co 500 nakup rabljenega (44.256)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Izteg 630 mm --- Hitrost rezanja od 15 do 120 m/min --- Hidravlični pomik mize --- Nosilnost mize pribl. 450 kg --- Hidravlični dvižni valji v mizi --- Pomik mize 400 mm. Miza desno od žaginega lista, Š x D 500 x 975 mm. Miza levo od žaginega lista, Š x D 500 x 975 mm. Namenjeno za rezanje visoko kakovostnih materialov ali za postavitev vpenjalnih naprav. Dkodpfx Aezap E Uob Hen

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, - Pogon žaginega traku: 1,1 kW - Hitrost rezanja: 39 / 78 m/min - Tlačna sila pri rezanju: z lastno težo žaginega okvirja - Dimenzije žaginega traku: 3350 x 27 x 0,9 mm Dedpfxezbqr So Ab Hekn - Napenjanje žaginega traku: s ročnim kolesom - Območje krožnega reza: --> 90° Ø 260 mm --> +/- 45° Ø 200 mm --> +/- 30° Ø 130 mm - Območje ravnega reza: --> 90° 300 x 260 mm --> +/- 45° 180 x 180 mm --> +/- 30° 120 x 120 mm Po koncu reza se žaga dvigne hidravlično s pritiskom na gumb. V obsegu dobave sta vključeni 2 valjčni stezi (dovodna in odvodna), vsaka dolga ca. 4,5 m.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Meba Mebamat 330 Avtomatska tračna žaga za kov Proizvajalec: Meba Tip: Mebamat 330 Leto izdelave: 2018 Stanje: rabljeno, zelo dobro Dkedpjy Uzg Uofx Ab Hjn Hidravlična naprava za paketno rezanje Mizna podlaga z valji, približno 3,5 metra Začetek palice z laserskim merjenjem Zaznavanje premera z laserskim merjenjem Velika podatkovna baza materialov z avtomatskim izračunom hitrosti reza Dodaten sistem minimalnega mazanja z oljno meglo Skrajšana dolžina ostanka približno 50 mm LED strojna svetilka Zunanja šprica za čiščenje delov in stroja Regulacija pritisk za vpenjanje za rezanje tankostenskih cevi Spiralni transporter za odrezke

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, 1 used mitre band saw Make: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2,491 mm Width: 1,240 mm Height: 1,369 mm (bow down), 2,109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically regulated flow control Material clamping: manual Saw band dimensions: 5,090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical, via tensioning cross Saw band cleaning: by easily replaceable wire brush driven in proportion to the main drive. Coolant: Supplied via a coolant nozzle, tank volume approx. 50 l, pump output approx. 16 l/min. Cutting capacities in mm approx.: Mitre angle 0° (90°) 45° 60° Round 400 320 240 Dodswuqbbspfx Ab Hskn Square 320 x 320 320 x 320 220 x 220 Flat (W x H) 400 x 320 210 x 320

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Premer reza 400 x 260 mm Dolžina tračnega lista 4640 mm Širina reza 400 mm Celotna potrebna moč 8 kW Djdoymqwlopfx Ab Hskn Teža stroja cca 2,2 t Prostorske zahteve cca 2,6 x 1,8 x 1,8 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Kaltenbach Saw Kaltenbach KBR 371 NA/ABG Year of manufacture: 2004, CNC controlled Control system: Siemens Dkjdpswqr Ubjfx Ab Hen Fully automatic saw with dual-station material feeder. Material feeder equipped with a fully automatic storage magazine. Machine is in full working order, in very good condition – regularly serviced.

Stanje: novo, Leto izdelave: 2026, Holzkraft HBS Precision Wood Bandsaws for the Professional Craftsman Top quality, workmanship, and value for money Particularly smooth and precise operation thanks to a torsion-resistant machine housing Large one-piece grey cast iron saw table with precisely ground and polished surface Quick-release saw blade tensioning via eccentric lever on the rear of the machine Supplied as standard with two speeds Precise 3-roller blade guides, standard top and bottom from HBS 351 and up Rapid cutting height adjustment via rotary knob and rack-and-pinion with millimeter scale Smooth-running aluminium parallel fence with eccentric quick-clamping and magnifying glass Standard mitre fence, adjustable ±60° to both sides Aluminium parallel fence with eccentric quick-clamping Technical data: Work table dimensions: 495 x 356 mm Cutting speed: 650 / 400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with fence: 321 mm Blade length: 2562 mm 3-roller precision guides: top/bottom Table tilt: -10°, +45° Dksdpfovk Sdksx Ab Hjn Motor output: 550 Watts / 230 Volts Weight: 80 kg Dimensions (mm): 610 x 445 x 1753 Extraction port diameter: 100 mm Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Optimum Optisaw SD 500 Double Miter Metal Band Saw with Swiveling Saw Frame Djdpfjgd Si Eox Ab Hjkn Item no. 3292380 Approx. length: 2122 mm Approx. width/depth: 1046 mm Approx. height: 1497 mm Approx. weight: 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Frequency: 50 Hz Machine Data Saw Band Speed(s): 35 / 70 m/min Saw Band Length: 3770 mm Saw Band Width: 34 mm Saw Band Thickness: 1.1 mm Miter Angle: 45 to -60° Feed: Hydraulic via Downfeed Cylinder Saw Frame Lift: Manual Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° upright rectangle (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° upright rectangle (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm +45° upright rectangle (solid): 280 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° upright rectangle (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw frame Supplied as standard with high-quality bi-metal saw blade Micro switch for automatic end-stop Coolant pump Ball bearing saw band guides with carbide plates for optimal cutting results Simple adjustment of downfeed speed via feed control valve on the operator panel Large, quick-release vice, laterally adjustable Clear operator control panel Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Panhans Bandsaw Machine BSB 800 TECHNICAL DESCRIPTION Robust German engineering Machine frame in an elegant, modern, torsion-free double-chamber steel welded construction Upper and lower doors safeguarded by limit switches Upper and lower precision bandsaw blade guide APA 2, size 2 Finely planed cast iron table Tilting table plate up to 45° Dodpfjr Igzcex Ab Hskn Dynamically balanced bandsaw wheels with vulcanized rubber tires Fence rail can be used on the left of the saw blade; fence profile reversible Blade tension indicator 1 piece saw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.301 Mechanical height adjustment of saw blade guard via handwheel with locking ratchet Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS certified Machine frame left-hand version Rotary cam switch with star-delta start and emergency stop button Wheel diameter: 800 mm Blade speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm Optionally, with special coating: min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction ports: 2 x Ø120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Holzkraft Bandsaw HBS 533 S. Heavy-duty professional model with high dead weight for maximum smooth running Dksdpeb S Uzksfx Ab Hon Exceptionally smooth and precise operation thanks to a torsion-free machine housing Large, one-piece cast iron saw table, tiltable from 0° to +20°, with ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic saw blade guides Large cast iron parallel fence Fast and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch with automatic shut-off when door is opened Large cast iron parallel fence Supplied as standard with mitre gauge Flywheels made of cast iron with special coating on the running surfaces Inspection window for checking saw blade run Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance The tilt angle is continuously adjustable from 0° to +20° Patented Work table dimensions 750 x 530 mm Cutting speed 1400 m/min. Flywheel Ø 530 mm Max. cutting height 350 mm Max. cutting width with fence 465 mm Max. cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision guides top / bottom Table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Location: Ex stock Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Elektra Beckum Used Wood Bandsaw BAS 315/5 WN55 Year of manufacture: 1987 Serial No.: 2106584 Blade length: 2240 mm Voltage: 230 Volt Cutting height: 170 mm Parallel fence Base frame Location: available from stock in 54634 Bitburg - immediately available - Dkjdpfx Abjvkyd Ss Hsn

Stanje: novo, Leto izdelave: 2026, Holzkraft HBS Precision Bandsaws for Craftsmen – Top Quality, Workmanship and Price-Performance Ratio Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing Large cast iron saw table made from a single piece, with a precisely ground and polished surface Quick-release blade tensioning via eccentric lever on the rear of the machine Standard with two cutting speeds Precise 3-roller blade guides, fitted as standard above and below from model HBS 351 upwards Rapid cutting height adjustment via rotary knob and rack-and-pinion with millimeter scale Smooth-running aluminium rip fence with eccentric quick-clamping and magnifier Dksdpfx Asvk Sd Djb Hon Standard mitre fence, adjustable by 60° to either side Aluminium rip fence with eccentric quick-clamping Technical Data: Worktable dimensions: 610 x 431 mm Cutting speed: 900 / 450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with fence: 370 mm / without fence: 410 mm Blade length: 3345 mm Precision 3-roller guide: above/below Table tilt: -10°, +45° Motor output: 1550 W / 400 V Weight: 130 kg Dimensions (mm): 680 x 512 x 2048 Extraction port diameter: 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Bernardo VMS 360 Vertical Bandsaw. Excellent condition, as it was used as a training machine – low hours. The vertical bandsaws of the VMS series are suitable for cutting almost all sawable materials (e.g., steel, plastic, non-ferrous metals, special alloys, etc.). Their main areas of application are general production, as well as tool and jig-making for the manufacturing of stamping and cutting tools. Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Cutting speed: 20 – 90 m/min Dsdsvutxdjpfx Ab Hjkn Blade length: 2840 mm Blade width: 3 – 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welder: 2.4 kVA Machine dimensions (L x W x H): 940 x 560 x 1850 mm Weight approx. 250 kg Supplied as standard with blade welding unit, annealing device, shears, and grinding stone Standard steplessly adjustable cutting speed Machine body made from robust steel construction ensures smooth operation Precision blade guides for optimal cutting results Ideal for cutting complex contours and shapes Blow-off device with compressor included in delivery Bandsaw blades for radius cutting available from 3 mm width Solid cast iron table offers a large support surface for safe working Location: ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2026, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional version with quick-release saw blade tensioning system for professional users Article number: 5150063 DESCRIPTION Heavy-duty professional model with high dead weight for maximum smoothness of operation Exceptionally smooth and precise running thanks to the torsion-resistant machine frame Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilting mechanism with handwheel and rack Quick-release saw blade tensioning Precision saw blade guides Fast and precise cut height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shut-off when the door is opened Large cast-iron parallel fence Supplied as standard with mitre gauge Table tilt via rack and handwheel TECHNICAL DATA Dimensions and Weights Product length approx. 1190 mm Product width/depth approx. 820 mm Product height approx. 2063 mm Net weight approx. 377.7 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table(s) Work table length: 830 mm Work table width: 600 mm Work table height: 830 mm Table tilt: 0 – 45° Note on table tilt: For safety reasons, from 20° a holding device/stop must be used to prevent the wood from slipping! Dodjvk Sfbepfx Ab Hekn Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 4.1 kW Cutting Ranges Max. cutting height 90°: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Saw Blade Saw blade speed: 1615 m/min Flywheel diameter: 630 mm Saw blade length: 4600 mm Saw blade guide: precision guidance above and below Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm Dodpfx Absg U Uv Ro Hskn 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, For sawing pipes and solid materials made of stainless and tool steel - Two band speeds via pole-changing motor - Robust gearbox with hardened and ground shaft - Precise and durable band guides with adjustable carbide inserts - Longer service life for the saw blade thanks to 25° saw arm inclination - Efficient coolant application directly at the saw blade guides - Electromechanical saw blade tension monitoring: A microswitch automatically shuts down the machine in case of deviations - Chip removal brush for optimal cleaning and maintenance of the saw blade Semi-automatic operation: - Automatic workpiece clamping after starting the cutting cycle - Executing the saw cut with the selected band speed - Automatic stop of the downfeed motion and the saw blade at the lower end position - Automatic return of the saw arm to the upper home position - Vise opens automatically - Operator only needs to reposition the material Equipment features: - Two band speeds - Cutting probe - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions: - Length: approx. 1860 mm - Width/Depth: approx. 1045 mm - Height: approx. 1750 mm - Weight: approx. 405 kg Drive power: - Rated power: 1.5 kW Electrical data: - Supply voltage: 400 V Machine data: - Saw blade speed(s): 20 - 100 m/min - Speed adjustment: stepless - Saw blade length: 2720 mm - Saw blade width: 27 mm - Saw blade thickness: 0.9 mm - Mitre angles: +60° to -45° Cutting capacities: - 0° round (tube): 230 mm - 0° round (solid): 150 mm - 0° rectangle horizontal (hollow section): 280 x 180 mm - 0° bundle (tube): 180 x 120 mm - -45° round (tube): 195 mm - -45° round (solid): 110 mm - -45° rectangle horizontal (hollow section): 180 x 170 mm - -60° round (tube): 125 mm - -60° round (solid): 80 mm - -60° rectangle horizontal (hollow section): 120 x 100 mm - +45° round (tube): 185 mm - +45° round (solid): 110 mm - +45° rectangle horizontal (hollow section): 180 x 120 mm Feed: - Table height for material infeed: 785 mm - Min. remaining workpiece length: 22 mm Dkjdpfx Ajd Hx Uqeb Hsn

Stanje: novo, Leto izdelave: 2026, Optimum Metal Bandsaw OPTIsaw S 275NV Metal bandsaws with swiveling saw frame. The S 275NV features steplessly adjustable saw band speed. Article number: 3300265 TECHNICAL DATA Dimensions & Weights: Length (approx.): 1,400 mm Width/Depth (approx.): 685 mm Net Weight (approx.): 185 kg Max. Width/Depth (approx.): 985 mm Max. Height (approx.): 1,700 mm Electrical Data: Drive Motor Power: 1.5 kW Supply Voltage: 230 V Mains Frequency: 50 Hz Coolant Pump Motor Power: 90 W Machine Data: Saw band speed: 20 – 90 m/min (variable) Blade length: 2,480 mm Blade width: 27 mm Blade thickness: 0.9 mm Mitre cuts: 0 – 60° Feed rate: steplessly adjustable Raising the saw bow: manual Cutting Capacities: Dsdpfx Asgx T I Ujb Hokn Cutting range 0° round (solid material): 225 mm Cutting range 0° square (solid material): 190 mm Cutting range 0° flat (solid material): 150 x 245 mm Cutting range +45° round (solid material): 145 mm Cutting range +45° square (solid material): 150 mm Cutting range +45° flat (solid material): 190 x 150 mm Cutting range +60° round (solid material): 90 mm Cutting range +60° square (solid material): 90 mm Cutting range +60° flat (solid material): 120 x 90 mm Note on Cutting Range: Cutting ranges determined using the weight of the saw frame with aluminum. Actual range may vary with different materials and may be smaller (not the maximum cutting capacity). INCLUDED IN DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Optimum Gear-Metal Bandsaw OPTIsaw SD 200V For Demanding Sawing Applications Item number: 3300205 DESCRIPTION - Quiet operation - Robust cast construction - Steplessly adjustable bow descent via hydraulic cylinder with throttle valve - Microswitch for automatic cutoff at end position - Clearly legible scale for angle adjustment - Supplied as standard with high-quality bimetal saw blade - Saw blade tension adjustable from the front by handwheel - Ball-bearing saw blade guide - Sturdy machine base with large wheels and a convenient transport handle for easy relocation of the machine - Adjustable material stop for series cuts - Safety switch for saw blade cover - Fully equipped, allowing the user to start productive work immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Net weight approx.: 130 kg Worktable height: 530 mm Electrical Data Drive motor power: 0.75 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed: 26 – 80 m/min Saw blade length: 2360 mm Djdpfx Aov Sg T Neb Hskn Saw blade width: 19 mm Saw blade thickness: 0.9 mm Mitre angle: 0 – 45° Feed: Steplessly adjustable Raising of saw bow: Manual Cutting Capacity Cutting range 0° round (solid): 180 mm Cutting range 0° square (solid): 180 mm Cutting range 0° rectangle vertical (solid): 180 x 240 mm / 50 x 300 mm Cutting range +45° round (solid): 110 mm Cutting range +45° square (solid): 150 mm Cutting range +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY Material stop Bimetal saw blade Machine base

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Panhans Band Saw BSB 500 Upper and lower APA II blade guides Tilting table plate up to 45° Door safety with limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 HP Motor 400 Volt with motor brake Blade speed 1,290 m/min Max. cutting height 320 mm Max. cutting width 485 mm Blade length max. 4,145 mm Table dimensions 500x680 mm Table height 890 mm Extraction ports 2x100 mm Required space: 900x525x1925 mm Weight 220 kg CE-compliant, GS-tested Available from stock in 54634 Bitburg Dsdpfx Aodq D I Hjb Hskn

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: C890, PANHANS Bandsaw Model: BSB 600 Frame built in modern steel construction, table top made from thick-walled, heavily ribbed cast iron, solid grey cast iron bandsaw wheels Technical Features: • Upper and lower PANHANS bandsaw blade guide APA II • Finely planed cast iron table • Tilting table up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber tires • Fence can be used to the left of the saw blade • Reversible fence profile • Blade tension indicator • Mechanical height adjustment via handwheel with locking ratchet • Automatic motor brake with main switch and motor protection switch Technical Data: • Max. cutting height: 380 mm • Max. cutting width: 570 mm • Table size (W x D): 590 x 810 mm • Table height: 905 mm • Wheel diameter: 600 mm • Motor power: 2.2 kW Dksdpfx Ajbzmb Hob Hon • Wheel speed: 820 rpm • Max. saw blade length: 4710 mm • Extraction port diameter: 2 x 100 mm • Machine weight: 272 kg • Machine dimensions (L x W x H): 1120 x 750 x 2125 mm Location: In stock, Bitburg Top exhibition price Loaded free on truck

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Cutting diameter: 128 mm Saw band length: 1640 x 13 mm Saw band width: 0.64 mm Cutting range at 90° (round): 128 mm Djdju Nig Rspfx Ab Hskn Cutting range at 90° (flat): 100 x 150 mm Cutting range at 45° (round): 90 mm Cutting range at 45° (square): 90 x 75 mm Band speed: 24 - 35 - 55 m/min Electrical connection: 220 V / Hz Total power requirement: 500 W Approx. machine weight: 80 kg Approx. machine dimensions (LxWxH): 0.95 x 0.52 x 1.1 m The machine is unused—as new—in its original packaging. The bandsaw is manually operated. Suitable for steel, cast iron, and non-ferrous metals. Workpiece clamping with vise jaws operated by handwheel; one fixed jaw and one movable jaw; clamping range 165 mm, swivel range 60°. Adjustable length stop up to max. 85 mm (i.d.).

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Cutting diameter: 320 mm Saw band length: 5,320 mm Saw band width: 32 mm Cutting capacity at 90 degrees, round: 320 mm Cutting capacity at 90 degrees, flat: 320 x 320 mm Control unit: Series P 9521 Height above floor: 730 mm Band speed: 15 - 110 m/min Dksdpfou Nii Sex Ab Hsn Total power requirement: 4.9 kW Machine weight approx.: 2,200 kg Machine dimensions (LxWxH) approx.: 1.9 x 2.95 x 1.8 m Heavy-duty hydraulic fully automatic high-performance band saw in 2-column design Suitable for: Solid and profile material made of steel as well as cast iron, light metals, and non-ferrous metals Hydraulic material feed, hydraulic vise clamping, adjustable clamping pressure Length measurement via precision glass scale, length 400 mm Maximum programmable cut-off length: 9,999.9 mm Automatic multiple stroke Saw band cleaning brush + 1x spare chip removal brush included Chip conveyor Coolant system (tank capacity approx. 65 liters) Hydraulic unit mounted to the side of the machine A facing cut is possible, and the set values can then be transferred to automatic operation. Min. cut-off length: 8 mm for single cuts, 15 mm when using the bundle clamping device.

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Reach: 410 mm Machine dimensions (approx. LxWxH): 1.15 m x 0.8 m x 2.0 m Dkodpfxsu Niu Us Ab Hjn Vertical bandsaw with bandsaw blade welding device The table is tiltable.

Stanje: rabljeno, Technical Details: Cutting diameter: 260 mm Saw band length: 2925 mm Saw band width: 0.9 mm Cutting capacity at 90 degrees, round: 270 mm Cutting capacity at 90 degrees, flat: 350x240 mm Blade speed: 35/72 m/min Floor clearance: 1,050 mm Total power requirement: 1.9 kW Machine weight approx.: 660 kg Machine dimensions approx. (LxWxH): 1.2 x 0.75 x 1.05 m Bandsaw - Semi-automatic Dsdpfjv T Tcmsx Ab Hskn Heavy-duty industrial bandsaw with roller conveyor Mitre cutting possible Hydraulic workpiece clamping in stock

Stanje: rabljeno, Technical details: Cutting diameter: 310 mm Cutting width: 360 mm Total power requirement: approx. 1.8 kW Mitre cut possible Workpiece clamping: hydraulic Dkjdsu Niifspfx Ab Hon Saw bow lowering: hydraulic Including roller conveyor, infeed approx. 2100 mm and outfeed approx. 2700 mm