Jkv Stroj Za Temperiranje Čokolade nakup rabljenega (86.852)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Lhjdpfx Ador A Eq Rsljg Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Lodpfx Adehy Tlrjljhg Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, ALTENDORF Model F 2 Ledpol D Rp Esfx Adlohg Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Ljdpfx Adelc Ewislohg Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Lhedpfx Ajwiwnqodlog Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. Lhsdod Supgjpfx Adlog - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Lhodpfx Adst Dx U Sjlsg Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Lsdpfx Ajuxqzuodlshg Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Ledpfx Adjtt Da Dolshg Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Lhedpev Hm Nmsfx Adlog Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!) Lhjdpfx Adjg Nn E Nelsg

Stanje: zelo dobro (rabljeno), Brusilni stroj za nože MVM z vrtljivim magnetom, dolžina 1500 mm Lhedpfxey Tpf Ns Adljg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, premer vijaka: 40 mm, delovna prostornina: 217 cm³, tlak vbrizgavanja: 2.377 letvica, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.480 mm, skupna širina: 1.510 mm, skupna višina: 2.190 mm, skupna masa: 6.000 kg, moč: 18,5 kW (25,15 KM), Oprema: dokumentacija / priročnik, In perfect shape. Lsdpfxjwlhb Ts Adlshg

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, Prosto stoječi pralni stroj za steklo, sestavljen iz: Ledpfx Asy Uarpodlshg Dovod RTV-11/30 Dovod RTV-16/30 Dovod RTV-16/30 Pralni stroj VHW-30/V8 z nastavitvijo debeline za steklo debeline od 3 do 60 mm Izhod RTVN-32/30 Vzorčevalna postaja RSV-27/33 Zadrževalna proga RTVN-27/30 Zadrževalna proga RTVN-22/30 Filtrirna naprava SAF-1000 Največje dimenzije stekla: 5000x3000 mm, najmanjše: 350x180 mm, debelina stekla: 3-60 mm Stroj je v dobrem mehanskem stanju. Upravljanje deluje – rezervni deli so še vedno na voljo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: CA90H2 PIPE BENDING ROLL, premer gredi: 90 mm, premer valja: 260 mm, vrtljajska hitrost (min.): 8 obr/min, največja hitrost vrtenja: 8 obr/min, skupna masa: 1.000 kg, skupna dolžina: 1.260 mm, skupna širina: 1.000 mm, skupna višina: 1.260 mm, moč: 3,68 kW (5,00 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, obratovalna hitrost: 8 mm/s, premer valja: 260 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, PROFILBIEGEWALZEN, WELLEN-AUSGANG 90 MM – ROHRBIEGEWALZE MARGI CA90H2, BAUJAHR 2007 WELLEN AUSGANGSGRÖSSE: 90 MM SATZ UNIVERSALWALZEN, DURCHMESSER 260 MM SEITLICHE RICHTWALZEN LINKS/RECHTS, SCHRAUBENVERSTELLUNG 4 WALZENSÄTZE FÜR ROHRBIEGEN: 61 – 78 – 90 – 116 MM KONSOLE ELEKTRISCH FAHRBAR AUF ROLLEN, ALLE BEDIENELEMENTE ZENTRALISIERT DIGITALE ANZEIGE DER WALZENPOSITION OBERE WALZE ANGETRIEBEN, ELEKTROMOTOR MIT GETRIEBE SEITENWALZEN HYDRAULISCH EINZELN VERSTELLBAR MIT KOLBEN Lhjdpfxewkrr Tj Adljg MASCHINE REVERSIERBAR – BETRIEB MIT WELLEN VERTIKAL/HORIZONTAL MÖGLICH SICHERHEITS- UND NOT-AUS-AUSRÜSTUNG AN DER MASCHINE INSTALLIERT BEDIENUNGSANLEITUNG UND SCHALTPLAN IM ORIGINAL MIT DER MASCHINE GEWICHT: 1.000 KG ABMESSUNGEN: 1.260 X 1.000 X H 1.260 MM

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec stroj za pranje stekla RTL-25VN, letnik 2007, smer dela levo/desno, s 6 ščetkami za Low-E steklo, vključno z enim rezervoarjem za toplo vodo, enim peščenim filtrom in enim puhalom. Stroj se dobavi z vhodnim trakom RTVN-32/25WE (dolžina 3,2 m) in izhodnim trakom RTVN-16/25ST (dolžina 1,6 m). Ščetke so glede na uporabo uporabne še najmanj 1-2 leti. Stroj je bil uporabljen le v manjši proizvodnji. Ker ima nekaj rjavih madežev, ga lahko ponudimo po ugodni ceni. Lhjdpfxoy Sv Tks Adlog Stroj je na voljo iz našega skladišča v Oroshazi, Madžarska.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zelo dobro ohranjen stroj malo delovnih ur, Kontak možen tudi preko WatsApp, Govorimo Angleško Nemško in ex YU jezike. Strj se nahaja v Nemčiji. Vsa specifikacija mašine je v prilogi pdf Lhjdpfx Ador Idkwelog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Lsdjy Iwlaepfx Adlehg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Odlično ohranjen stroj, trifazni priklop malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Lodpfx Asy R Ep Eedljhg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Ljdoxwuryepfx Adlshg Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Leto izdelave: 1900, stanje: rabljeno, Rabljeni stroj A2/35”. Minimalni premer 80 mm, največji 900 mm. Minimalna dolžina hloda 180 cm. Ljdpfxowqmyfe Adljhg Cena velja za stroj v trenutnem stanju. Podajalne verige in verižniki so lahko obnovljeni ali dobavljeni z doplačilom.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Trimmer 2A is a CNC cleaning machine for PVC frame corners, featuring two interpolated axes and automatic cycle. When properly configured, it can check the dimensions of the workpiece. Equipped with a 275 mm diameter blade, it allows, through various machining programs, the cleaning of the external corner of different profiles. Trimmer 2A is also fitted with upper and lower units with knives for cleaning seams, as well as upper and lower units with knives for cleaning internal corners. The cleaning of internal and external corners can be completed using the upper and lower drilling/milling units, designed for cleaning corners or gasket seats. The working units can be programmed independently via a CNC PC, which controls the profile programming and the machine operation, either manually or automatically. Lhjdpfx Adow Hk T Uoleg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, Univerzalni stroj COMEC RCG 900 za obnovo glav, blokov, bobnov in diskov osebnih in gospodarskih vozil. Širina obdelave: 320 mm Dolžina obdelave: 900 mm Največja delovna višina: 370 mm Največji hod mize: 1200 mm Pomik: 0,8 - 450 mm/min Največji premer zavornih bobnov: 1400 mm Glavni motor: 5,5 Hp Ledjy Rffyspfx Adlehg Obrati za obdelavo zavor: 35-70-50-100 vrt/min Približna teža z dodatki: 1700 kg Dimenzije: 2300 x 790 x 1700 mm (V)

Stanje: novo, Polirne krtače iz perlona 45/25x4 Lsdpsy R R H Nsfx Adlehg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, obratovalne ure: 18.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 110, premer žaginega lista: 1.430 mm, korak zobnika: 110 mm, premer brusilnega koluta: 125 mm, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2026, vhodna frekvenca: 50 Hz, premer diska: 125 mm, odprtina brusnega koluta: 32 mm, moč motorja brusilnega vretena: 1.000 W, vhodna napetost: 400 V, skupna masa: 1.800 kg, moč hladilne črpalke: 100 W, število osi: 3, Stroj je bil tehnično prenovljen in nadgrajen za največji premer žaginega lista od 80 do 1430 mm. Model CEF350 je namenjen brušenju stranskih ploskev zob na krožnih žagah s HM rezili. Lsdpoy Tpa Tefx Adlshg