Contur Sj-520/1500 S nakup rabljenega (85.791)

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA55, Machine overview The ATLANTA COMBIGIOTTO 90-M is a fully automatic inline packaging machine that collates containers into bundles and then packs them on a corrugated tray with film overwrap. The machine is configured for wrap + film on tray applications and operates with straight-line (inline) product infeed. It is suitable for a wide range of container formats from 0.5 L to 10 L, typically handling PET, glass, or HDPE bottles, cans, and similar rigid containers. The unit was built in 2008 and underwent a complete refurbishment in 2022. It is classified as operational. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray pack with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container feeding system (to be provided by the line integrator) Year of manufacture: 2008; Refurbished: 2022 Typical process sequence: Product collation in-line; picking and forming of tray blanks around the collated bundle; application and sealing of neutral film; discharge for downstream handling. This configuration ensures robust tray stabilization with protective film overwrap, suitable for distribution and palletizing. Technical data Ljdpfxsxdnbzj Adlehg Model: COMBIGIOTTO 90-M Brand: ATLANTA Operational status: Ready for operation Packaging configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine infeed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (refurbished 2022) Automation & Control Industrial PLC-based control system with HMI for recipe management and setpoint control (format parameters stored for repeatability). Speed control via frequency inverter/servo drives for synchronization of infeed, collation, tray wrapping, and film application. Integrated diagnostics, alarm history, and counters (shift/lot totals). Typical sensors: product presence, jam detection, film roll end, tray blank level, safety interlock status. Electrical protection class: IP54 for the electrical system and motors. Line Integration Container infeed: Not supplied with the machine. The packaging machine requires a stable, synchronized infeed from the line (accumulation/gap/divider to be supplied by the line integrator). Inline design simplifies integration with fillers, labelers, and downstream conveyor equipment. Standard interface signals (typically): machine ready, run enable, emergency stop loop, fault, upstream/downstream handshake. A detailed I/O list can be coordinated during integration. Discharge prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be specified as part of the project layout). Condition & Maintenance Overall status: Ready for operation. General overhaul completed in 2022 to restore full functionality. Recommended preventive maintenance: periodic inspection of film path and sealing units, collation guides, tray magazine mechanisms...

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA56, Machine Overview Automatic tray and film packer ATLANTA COMBIGIOTTO 90-M, designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product in neutral shrink film, afterwards passing the bundle through a shrink tunnel to produce stable, retail-ready packs. Ideal for beverage lines processing PET, glass or HDPE bottles. Reference No. FA56. Year of manufacture 2008, overhauled in 2022. Condition: Ready for operation. Expected output up to 25 bundles/min, depending on product and format. Operating Principle: Automatic grouping of bottles, tray forming/loading, film wrapping and consolidation in the shrink tunnel. Packaging Configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy integration with existing conveyor systems. Key Technical Data Brand / Model: ATLANTA COMBIGIOTTO 90-M Operating Mode: Automatic Infeed/Outfeed Alignment: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal Capacity: up to 25 bundles/min (depending on format/product) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-controlled system with operator HMI for recipe selection, speed setpoints, and diagnostics. Inverter-driven drives for smooth acceleration and product handling. Optoelectronic sensors for product presence, faults, and film detection. Shrink tunnel with temperature control for consistent film application. Locked access doors with safety monitoring for protected zones. Line Integration Infeed: Accepts bottles from conveyor with 90° transfer into the feeding area; integrated selection/divider functions to create pack patterns prior to tray loading. Outfeed: Discharge conveyor after shrink tunnel for connection to inspection, carton handling, or palletizing. Signals and handshakes typically include start/stop, faults, emergency stop, and speed reference. Mechanical interface and layout diagrams available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine delivered ready for operation. Preventive maintenance recommended: regular checks of film path, cutting/sealing components, tray forming kits/generators, lubrication, and wear parts of conveying systems. Ljdpox H Thzofx Adlehg Performance & Versatility Suitable for a wide range of cylindrical or square bottles common in beverage production. Typical bottle pack patterns (e.g. 2×2, 3×2, 4×3, etc.), depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray adds strength and stacking stability. Consistent bundle quality through controlled film wrapping and thermo-shrinking process. Site Requirements Power supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and protective ground). Auxiliary systems: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 3.300 mm, pomik po osi Z: 1.500 mm, Manufacturer: SORALUCE Model: FS 8000 Control: Heidenhain iTNC 530 Year of manufacture: 2006 ATC Chain with 40 positions Maximum tool size: Ø 125 x 400 mm Machine prepared for rotary table Ledjxc Emxjpfx Adlohg Chip conveyor Central lubrication Travel with vertical head rotated: 3,300 mm Specifications Metric / US Standard X-axis: 8,000 mm Y-axis: 2,800 mm Z-axis: 1,500 mm Spindle power: 30 kW Spindle speed: 5,000 rpm Tool holder: 50 ISO/BT/MK X-axis feed rate: 15,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 15,000 mm/min Milling head auto-index: 2.5 x 2.5° Dimensions (approximate) Length: 17,500 mm Width: 4,050 mm Height: 5,020 mm Weight: 38,400 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, širina transportnega traku: 520 mm, trajanje garancije: 24 meseci, skupna širina: 1.460 mm, skupna dolžina: 940 mm, skupna višina: 580 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2028, električna varovalka: 16 A, širina odpiranja: 30 mm, delovna širina: 520 mm, vrsta vhodnega toka: trifazni, Valjar stroj za testo Model: SM 520 S preizkušena tehnologija ... že večkrat preverjena! enostavno ročno upravljanje primeren za valjanje in laminiranje vseh vrst testa mize zložljive navzgor enostavna tehnika ob nespremenjeni kakovosti! Debelina valjanja od 1 do 30 mm Širina valjanja do 520 mm Namizni valjar samo pri nas testiran po DGUV V3 Priključek: 400 V, 16A-CEE vtikač Dimenzije: 1460 x 940 x 580 mm (D x Š x V) Nova naprava + SAB testirana 24 mesecev garancije + servis rezervnih delov VRHUNSKA kakovost in cena v enem stroju! Možnost: Leasing & najem Podstavek Vzdrževalna pogodba Paket storitev Vleka Dostavna služba Uvajanje / zagon Ledpou Amg Ijfx Adlohg Na zalogi imamo veliko izbiro strojev za valjanje testa!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 78.099 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 25 mm, skupna višina: 2.800 mm, skupna masa: 10.700 kg, Oprema: dokumentacija / priročnik, Arburg 520S 1600 290/70 2 komponenty 12,3 mil. cyklov 86 565 hodín ručný režim 78 099 hodín automatický režim Vstrekovacia jednotka 1 horizontálna 290, priemer 25 mm, max. 71 cm³ Vstrekovacia jednotka 2 vertikálna 70, priemer 18 mm, max. 21 cm³ Otvárací zdvih: 925 mm Elektrický indexový otočný pohyb 12-zónový horúci kanál integrovaný 3x ťažné jadrá 2x vyfukovanie (ovládanie ihlového uzáveru) Rôzne zákaznícke vstupy a výstupy Rozhrania: ALS Temperovacie zariadenia Sušička Lhjdoxzix Aspfx Adlsg Multilift H 6kg: 2x vákuum 5x dvojčinný uchopovač Z-os servo, 800 mm C, G, X a B os pneumatická Rôzne zákaznícke vstupy a výstupy (monitoring uchopovačov atď.) Dôležité upozornenie! Daňová informácia a výhoda pre použité stroje Od 1.7.2025 je možné uplatniť aj použité stroje na mimoriadny odpis vo výške 30 % ročne. Okrem priaznivejšej ceny v porovnaní s novým zariadením môžete uplatniť rovnaké odpisy ako pri novom stroji. Kľúčové slovo: booster rastu (§ 7 odst. 2 EStG-E)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 78.100 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 25 mm, Arburg 520S 1600 290/70 2-Component Injection Moulding Machine 78,099 operating hours, automatic Injection unit 1 horizontal, 290, diameter 25 mm, max. 71 cm³ Injection unit 2 vertical, 70, diameter 18 mm, max. 21 cm³ Lhodpfex A Dy Rox Adljg Opening stroke: 925 mm Electric indexing rotation 12-zone hot runner system integrated 3x core pull 2x air blow (control for needle valve) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6 kg: 2x vacuum 5x double-acting gripper Z-axis servo, 800 mm C, G, X, and B axes pneumatic Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we provide a start-up guarantee with every machine purchased from us, and the machine is commissioned by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Notice!!! Current information – Tax notice and benefit for used machinery As of 01/07/2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§7, Paragraph 2, German Income Tax Act – draft).

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A32404019520, vrsta vhodnega toka: trifazni, vhodna napetost: 230 V, skupna masa: 53 kg, vrsta hlajenja: zrak, laserska moč: 1.500 W, dolžina gredi: 1.080 mm, neprekinjena moč: 1.500 kW (2.039,43 KM), Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, zaščita za glavo, Operation - Simplest operation thanks to synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimum readability of all relevant parameters. Integrated help function provides greater understanding of the adjustment options - Fully integrated control in the wire feeder case – operation via the machine or the wire feeder as desired Technical Features - High-performance laser cells combined with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning – laser cleaning is perfect for paint removal, derusting, and descaling - Optional: Dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access monitoring (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection Lhjdpfx Adeyuvktslsg - Safety instructions as well as manual laser release activation required at every start - Dual-pressure button prevents unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding over Conventional Welding Methods - Minimal distortion, incredibly fast, exceptionally high quality (even with very thin materials < 1 mm) - Consumes approx. 70% less energy - Quick and easy to learn - High process reliability - Massive time savings with significantly reduced post-processing - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of the Craft-Laser - Laser cleaning with up to 100 mm scan width and autofocus - 2-in-1 machine: Welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping required

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer Lhedpfxsyxdwdj Adlsg • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: 12030320, potovalna razdalja osi X: 810 mm, pomik osi Y: 400 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 620, širina mize: 900 mm, dolžina mize: 400 mm, skupna masa: 3.500 kg, največja hitrost vretena: 10.000 obr/min, število vreten: 1, število mest v zalogovniku orodij: 23, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Cet centre d'usinage vertical Saeilo Contur MMV 810 S est de l'année 2012 et dispose d'une commande Heidenhain TNC 620 avec volant électronique pour une utilisation précise. Les courses sont X = 810 mm, Y = 400 mm, Z = 500 mm, avec une table de 900 x 400 mm équipée de 3 rainures en T de 14 mm. Il dispose d'un changeur d'outils à double bras de 23 positions, d'un porte-outil BT-40, et d'une broche haute performance jusqu'à 10 000 tr/min, refroidissement par huile et arrosage interne à 20 bar. Vitesse de broche : 0-10 000 tr/min Courses axes : Lodpox N E Acjfx Adlshg X : 810 mm Y : 400 mm Z : 500 mm Changeur d’outils à double bras, 20 positions Cône d’outil : BT40 Refroidissement à l’huile de la broche // Arrosage interne 20 bar Racleur à disques dans le réservoir de liquide de coupe Refroidissement par air comprimé à travers la broche ou en externe Pistolet de rinçage externe Convoyeur de copeaux hélicoïdal Graissage centralisé Surface table : 900 x 400 mm avec 3 rainures en T de 14 mm Poids : 3 500 kg Documentation incluse

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 30-S/70, Swing diameter over bed: 625 mm Max. turning length: 1500 mm Spindle bore: 105 mm Spindle speeds: 6.6 – 2000 rpm Required space: 4400 x 2050 x 1820 mm Lsdpfxj Nzhde Adlehg Weight: 5200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, avtomatski peskalni stroj 1500 mm ODPRTI VRH Lodpfsy Emf Dex Adlohg maks. debelina stekla: 70 mm število pištol: 2 + 1 ročna za maks. dimenzije stekla: 1500 x 3000 mm skupna višina stroja: 2300 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 68.946 h, Funkcionalnost: popolnoma funkcionalen, V obratovanju Delovne ure: 68 946 h Lodpeyab R Njfx Adlehg Sila zapiranja: 1 500 kN Enota za zapiranje: 520 H Sila/ hod odpiranja: 450 mm Fiksna/variabilna višina vgradnje kalupa: 250-550 mm Fiksna/variabilna razdalja med ploščami: 700-1000 mm Razmak stebrov: 520 x 520 mm Pritrdilne plošče za kalup (širina x višina): 695 x 695 mm Največja teža pomične polovice orodja: 1 000 kg Sila – hod izmetalca: 40 kN – 175 mm Čas praznega cikla: Conformt min. 1,5 s – 364 Premer polža: 40 mm Efektivna dolžina polža: 20 L/D Hod polža: 160 mm Izračunani volumen vbrizga: 201 cm³ Teža na vbrizg: 184 g PS Pretok materiala: 29 kg/h PS Tlak vbrizgavanja: 2 000 bar Čas dotlaka: 45-2000 s-bar Pretok vbrizgavanja: 214 cm³/s Hitrost vbrizga: 170 mm/s Moč – ogrevalne cone: 9,7 kW – 5 Kapaciteta olja: 160 l Teža: 6 700 kg Višina: 2 215 mm Dolžina: 4 672 mm Na voljo tudi kompletna postavitev: brizgalni stroj + WITTMANN W818-2066 (2013) robot + transportni trak Robot WITTMANN W818-2558 (2013)

Stanje: dober (rabljeno), Leto izdelave: 2003, Netstal S-1500-460 (2003) Lhsdpewkg Txsfx Adlsg Zapiralna sila - 150 t Premer polža - 45 mm Ure delovanja - 79.000 Razdalja med stebri (razmak stebrov): 460 × 460 mm Velikost orodjarskih plošč (fiksna/pomična plošča): 757 × 757 mm Odpiralni hod: 450 mm Min. višina orodja: 250 mm Maks. višina orodja: ≈ 550 mm Maks. odprtina (maksimalna razdalja plošč): deloma višja, odvisno od konfiguracije Vbrizgavalna/plastifikacijska enota: Premer polža (cilinder): 40 mm v standardni izvedbi. Volumen vbrizga (maks.): ≈ 201 cm³ Teža vbrizga za PS: pogosto okoli ~193 g (odvisno od materiala) Vbrizgovalni pritisk: odvisno od konfiguracije (nekateri viri navajajo okoli 1750 bar ali več) Dimenzije stroja &amp

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm * Maximum panel length: 3200 mm * Rotation system: double-cone * Rotation direction: from crosswise to lengthwise This device is frequently used in the woodworking and furniture industries to facilitate the handling of panels during processing. If you have any questions or require further information, please do not hesitate to contact us! Lhjdpsrzhfpefx Adleg

Stanje: dober (rabljeno), Leto izdelave: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool holder: Capto Tailstock Quill diameter: 85 mm Quill taper: MT 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Lhsdpfowxahfox Adlsg Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, izvrtina vretena: 105 mm, premer struženja: 710 mm, višina središča: 355 mm, stružna dolžina: 1.500 mm, Premer struženja v izrezu: 960 mm, SN 710S x 1500 Leto izdelave 2015 Digitalni prikaz Acu Rite Strojna svetilka Lsdpfjvq Ibxsx Adlohg Rezervoar za hladilno tekočino Dolžinski prislon Zadnja zaščita pred ostružki Zaščita vpenjalne glave

Leto izdelave: 2026, stanje: novo, The modern and optimal solution for window packaging. Window manufacturers often face difficulties and challenges in the packaging process, especially with large formats. Lifting, rotating, and moving windows can make the work very laborious, slow, and hazardous. FRAMEWRAP is the solution that makes the process simple, fast, and safe. This machine has been specially developed for production areas where window manufacturing is carried out on an inclined plane. The machine can be integrated into production lines without changing the window’s position during packaging. It features a motorized infeed system with an automatic pressing unit that adjusts to the specific dimensions of each window. Technical Specifications: Lsdpfxjihvbte Adlshg Operator Side: - Pass-through direction: Right Product Wrapping Sizes: Max length: unlimited Max wrapping size: 150 x 1200 mm Min wrapping size: 40 x 500 x 750 mm Conveyor Features: - Usable length: 2950 mm - Total length: 2953 mm - Working height: 620 mm - Electric motor power: 0.55 kW - Max. speed: 12 m/min - Load capacity: 100 kg/m Standard Equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch film tension with mechanical brake - Automatic stretch film clamp and cutting system - Automatic stretch film hook system - Photoelectric sensor for automatic start of wrapping process - Touchscreen for customizing machine parameters to product requirements - Operator safety systems Stretch Film Specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron General technical data: - Main motor power: 1.5 kW - Max. ring rotation speed: 85 rpm - Min. ring rotation speed: 20 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1250 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12090339, potovalna razdalja osi X: 900 mm, pomik osi Y: 600 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 36, TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 550 mm Lhsdpfxjwu Ekds Adleg Control: Siemens Sinumerik 828 D Spindle speed: 10,000 rpm Tool changer: 36-position MACHINE DETAILS Machine number: 12090339 Weight: 4,000 kg Connected load: 20 kVA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 25.243 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12030320, potovalna razdalja osi X: 810 mm, pomik osi Y: 400 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain TNC 620, največja hitrost vretena: 8.000 obr/min, TEHNIČNI PODATKI Pomik X-os: 810 mm Pomik Y-os: 400 mm Pomik Z-os: 500 mm Širina mize: 900 mm Dolžina mize: 400 mm Največja hitrost vretena: 10.000 vrt/min Število vreten: 1 Število mest v orodnem magazinu: 23 Ledpfxsyaq Sij Adlehg Vpenjalo orodij: BT40 PODROBNOSTI STROJA Krmiljenje: Heidenhain TNC 620 Skupna teža: 3.500 kg Vhodna napetost: 400 V Delovne ure krmiljenja: 25.243 h OPREMA Dokumentacija/priročnik Nastavljiva hitrost vretena Transporter za odrezke Notranja dovod hladilne tekočine: 20 bar Strgalo za diske v rezervoarju hladilne tekočine Zračno hlajenje skozi vreteno ali od zunaj Zunanja pištola za hladilno tekočino Spiralni transporter za odrezke Centralno mazanje

Stanje: rabljeno, prva registracija: 01/2020, barva: srebrn, Leto izdelave: 2020, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: dvižna zadnja plošča, Vehicle location: Bovenden, aluminium tail lift, standing Body: 1.5 t tail lift ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Lhjdpfoi Rq T Rox Adljg

Stanje: kot nova (razstavni stroj), The Numturn S 560/1500 CNC is a high-performance CNC flat bed lathe, specifically engineered for machining large and heavy workpieces. Thanks to its robust flat bed design, it ensures high precision and user-friendly operation. The machine features a powerful Siemens servo motor that drives the main spindle via a manually shiftable 4-speed gearbox, enabling stepless speed control and providing high torque across the entire speed range. High-quality ball screw drives and servo drives guarantee dynamic feed and precise positioning on both axes. The standard automatic 8-position VDI tool turret and the hydraulic chuck with adjustable clamping force offer flexibility and efficiency in operation. The intuitive Siemens 828D control unit allows for a short learning curve. Whether for maintenance departments or single-part production, the Numturn S 560/1500 CNC is the optimal choice. Order your CNC flat bed lathe now and benefit from outstanding precision and durability. Ledpfx Asuyg Erjdlohg

Stanje: rabljeno, Leto izdelave: 2012, x-axis travel: 1520 mm y-axis travel: 700 mm z-axis travel: 800 mm Control: Siemens 828 D Shop Mill Clamping surface table: 1600 x 700 mm Rapid traverse: 30 m/min Table load capacity: 1.4 t Spindle speed range: 8000 rpm Spindle torque: 300 Nm Drive power - milling spindle: 19.5 kW Number of tools in magazine: 30 pcs Tool holder: SK 40 Machine weight approx.: 10.0 t Lhjdpov Nhlzsfx Adljg Dimensions (L x W x H): 4.4 x 2.3 x 2.9 m Accessories: - Synchronized thread cutting - Chip conveyor - Dialog programming Shop Mill - Internal coolant supply - External electronic handwheel

Stanje: dober (rabljeno), Labyrinth housing seal -d: 90 mm Lhodpfx Asb A R Tujdlog -D: 145 mm -B: 24 mm -Quantity: 15 available -Price: per piece -Weight: 2 kg

Stanje: novo, Load capacity, racking: 12,000 kg Load capacity per level: 2,000 kg Number of storage levels: 6 pcs Recommended material length: 3,000 mm Upright distance: 1,500 mm Rack height: 2,440 mm Dimensions (L x W x H): 2.3 x 0.9 (1.35) x 2.45 m The ideal solution for storing long materials with 2 uprights. - Each shelf can be swung outward, allowing for loading and unloading with an overhead crane at any time. Ledpfxofgyg Ro Adlshg - Single-sided configuration. Galvanised tray made of 2 mm steel sheet, length 3,000 mm: €301 Galvanised tray made of 2 mm steel sheet, length 3,000 mm, with cutout: €333 Distributor for tray, steel: €54.00 Distributor for arm, steel: €54.00 Distributor for tray, stainless steel: €69.00 Distributor for arm, stainless steel: €69.00

Stanje: novo, Load capacity per rack: 14,000 kg Load capacity per level: 2,000 kg Number of storage levels: 7 pcs Recommended material length: 3,000 mm Upright distance: 1,500 mm Rack height: 2,440 mm Dimensions (L x W x H): 2.3 x 0.9 (1.35) x 2.45 m The most suitable solution for storing long materials with 2 uprights. Lodpfsfgyg Sox Adlohg - Each compartment can be swung outwards, allowing for loading and unloading with an overhead crane at any time. - Single-sided design. Galvanized tray made from 2 mm sheet steel, length 3,000 mm: €301 Galvanized tray made from 2 mm sheet steel, length 3,000 mm, with cutout: €333 Divider for tray, steel: €54 Divider for arm, steel: €54 Divider for tray, stainless steel: €69 Divider for arm, stainless steel: €69